MCP4716A0T-E/CH Microchip Integrated Circuit (SOT23 (6-Pin)) In Stock
The MCP4716A0T-E/CH is a 10-bit single-channel digital-to-analog converter from Microchip with I2C interface. It operates from 2.7 V to 5.5 V supply and delivers 0.01 V to 5.46 V analog output. Available in a compact SOT-23-6 package for space-constrained designs.
- Manufacturer
- Microchip
- Package
- SOT23 (6-Pin)
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Datasheet
- MCP4716A0T-E/CH Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.3000(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 10-bit resolution DAC with I2C serial interface for precise analog voltage control
- Wide supply voltage range of 2.7 V to 5.5 V supporting diverse system power rails
- Non-volatile EEPROM memory retains DAC output setting after power cycle
- Ultra-compact SOT-23-6 package ideal for space-constrained embedded designs
- Fast settling time with rail-to-rail output spanning 0.01 V to 5.46 V
Applications
The MCP4716A0T-E/CH is used in precision analog signal generation for sensor calibration, programmable voltage references, and bias voltage control in industrial and consumer electronics. Its I2C interface and non-volatile EEPROM make it well-suited for set-and-forget applications such as LCD contrast adjustment, audio volume control, and portable medical devices. The compact SOT-23-6 footprint enables integration into handheld instruments, IoT sensor nodes, and wearable electronics requiring accurate analog output.
Specifications
| Manufacturer Package Code | SOT-23-6 |
| Factory Lead Time | 7Weeks |
| YTEOL | 13 |
| Analog Output Voltage-Max | 5.46V |
| Analog Output Voltage-Min | 0.01V |
| Converter Type | D/A CONVERTER |
| Input Bit Code | BINARY |
| Input Format | SERIAL |
| JESD-30 Code | R-PDSO-G6 |
| JESD-609 Code | e3 |
| Linearity Error-Max (EL) | 0.354% |
| Number of Bits | 10 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Settling Time-Nom (tstl) | 6 µs |
| Supply Current-Max | 0.4mA |
| Supply Voltage-Nom | 3V |
| Surface Mount | YES |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Package | SOT23 (6-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the output voltage resolution achievable with the MCP4716A0T-E/CH?
The MCP4716A0T-E/CH provides 10-bit resolution, yielding 1024 discrete steps across its output range of 0.01 V to 5.46 V. At a 5 V reference, each step corresponds to approximately 4.88 mV, enabling fine-grained analog voltage control suitable for precision calibration and sensor biasing.
Which interface does MCP4716A0T-E/CH use and at what speed can it communicate?
MCP4716A0T-E/CH uses the I2C serial interface supporting standard mode at 100 kHz and fast mode at 400 kHz. This 2-wire protocol simplifies board routing by requiring only SDA and SCL lines, making it efficient for microcontroller-based designs with multiple peripheral devices on a shared bus.
How does the non-volatile EEPROM in MCP4716A0T-E/CH benefit battery-powered designs?
The built-in EEPROM retains the DAC register value across power cycles without requiring host MCU re-initialization. This reduces startup current and latency in battery-powered devices, ensuring the analog output is valid within microseconds of power-up without additional 100 kHz I2C transactions.
What power supply range does MCP4716A0T-E/CH support and what current does it draw?
MCP4716A0T-E/CH operates over a supply range of 2.7 V to 5.5 V, covering both 3.3 V and 5 V logic systems. Typical quiescent current is approximately 175 µA in normal mode, making it suitable for power-sensitive portable and IoT applications where energy efficiency is critical.
Can MCP4716A0T-E/CH replace MCP4706 in designs needing higher DAC resolution?
Yes, MCP4716A0T-E/CH offers 10-bit resolution compared to MCP4706's 8-bit, providing 4x finer output steps with the same I2C interface and SOT-23-6 footprint. Both share 2.7 V to 5.5 V supply compatibility, so a pin-compatible drop-in upgrade improves analog accuracy without PCB redesign.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3000 | $0.30 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”