MCP4662-503E/UN Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP4662-503E/UN is a dual-channel, 256-step, 50 kOhm non-volatile digital potentiometer with I2C interface in 10-pin MSOP package. Ideal for automated gain control, signal conditioning, and programmable voltage divider applications.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4662-503E/UNSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
10
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.0000(MOQ 25)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Dual independent 50 kOhm (end-to-end) digital potentiometers
  • 256 wiper positions per channel for fine-resolution adjustment
  • Non-volatile EEPROM storage retains wiper position after power loss
  • I2C serial interface with increment/decrement and direct-set commands
  • Wide supply voltage range 1.8 V to 5.5 V
  • Compact 10-pin MSOP package with 3 mm x 3 mm footprint
  • Low quiescent current suitable for battery-powered designs

Applications

The MCP4662-503E/UN suits audio volume control, programmable gain amplifiers, and sensor calibration circuits where digitally controlled resistance adjustment must survive power cycling without losing calibration data. Its non-volatile wiper storage eliminates re-initialization routines at startup, reducing firmware complexity in embedded systems. The dual-channel configuration in a single 10-pin MSOP package allows simultaneous independent adjustment of two signal paths, making it efficient for balance control, differential signal trimming, and multi-axis sensor calibration.

Specifications

Pbfree CodeYes
Manufacturer Package CodeMSOP-10
Factory Lead Time7Weeks
YTEOL9
Additional FeatureNON-VOLATILE MEMORY
Bandwidth-Nom0.2kHz
Control InterfaceINCREMENT/DECREMENT
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeS-PDSO-G10
JESD-609 Codee3
Number of Functions2
Number of Positions257
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP10,.19,20
Package ShapeSQUARE
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom2.7V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Total Resistance-Nom50000Ω
## MCP4662-503E/UN Alternates Showing resultsImage
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Datasheet

MCP4662-503E/UN Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for MCP4662-503E/UN:

Frequently Asked Questions

Does the MCP4662-503E/UN retain its wiper position after a power cycle, and how is the stored value restored?

Yes, the MCP4662-503E/UN uses internal non-volatile EEPROM to store the last written wiper position for both channels. At power-up, the device automatically loads the stored values so the resistance returns to the same setting without any MCU initialization command. This simplifies firmware and ensures consistent behavior across 10,000 EEPROM write cycles.

What resistance resolution does the MCP4662-503E/UN provide and how is it calculated for a 50 kOhm end-to-end value?

With 256 wiper steps across a 50 kOhm end-to-end resistance, each step of the MCP4662-503E/UN changes the wiper-to-terminal resistance by approximately 196 ohms (50,000 / 255 steps). This fine resolution enables precise gain trimming and signal offset calibration, particularly in 12-bit or 16-bit ADC front-end circuits where small resistance errors impact measurement accuracy.

Which supply voltages are compatible with the MCP4662-503E/UN, and can it interface with both 3.3 V and 5 V microcontrollers?

The MCP4662-503E/UN operates across a 1.8 V to 5.5 V supply voltage range, making it compatible with both 3.3 V and 5 V microcontroller I2C buses without level translation. At 3.3 V supply, the I2C logic thresholds scale accordingly, and the 50 kOhm potentiometer channels remain fully functional with no derating in step count or wiper resistance across the -40 °C to 125 °C operating temperature range.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.0000
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
25+$1.3900$34.75
50+$1.3400$67.00
100+$1.1600$116.00
1000+$1.1200$1120.00
5000+$1.0100$5050.00
7500+$1.0000$7500.00
pcs
Unit price: $1.3900 · Total: $34.75

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea