MCP4661-502E/ST Microchip Integrated Circuit (Small Outline Packages) In Stock
MCP4661-502E/ST is a dual-channel 5 kΩ digital potentiometer from Microchip Technology with 256 wiper positions per channel, I2C increment/decrement control, and integrated non-volatile memory. It is housed in a 14-pin TSSOP package for compact mixed-signal board layouts. From $1.20, in stock, worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- MCP4661-502E/ST Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.0900(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual 5 kΩ channels with 256-step resolution in a 14-pin TSSOP package replace 2 discrete mechanical trimmers, enabling software-driven calibration for 2 analog signal paths simultaneously
- Non-volatile EEPROM stores wiper positions across power cycles, so calibrated 5 kΩ settings are restored instantly at startup without host microcontroller re-initialization
- Increment/decrement I2C control interface allows step-by-step resistance adjustment from firmware, ideal for interactive tuning loops and closed-loop control applications
Applications
MCP4661-502E/ST is used in dual-axis sensor calibration circuits, programmable audio volume controls, and adjustable op-amp gain stages where two independent 5 kΩ resistance channels need software control via I2C. Its non-volatile memory suits set-and-forget calibration in industrial transmitters and HVAC controllers that must retain their trim settings across power outages. The 14-pin TSSOP package enables placement alongside analog front-end components on dense instrumentation PCBs.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | TSSOP-14 |
| Factory Lead Time | 7Weeks |
| YTEOL | 8 |
| Additional Feature | NON-VOLATILE MEMORY |
| Bandwidth-Nom | 2kHz |
| Control Interface | INCREMENT/DECREMENT |
| Converter Type | DIGITAL POTENTIOMETER |
| JESD-30 Code | R-PDSO-G14 |
| JESD-609 Code | e3 |
| Number of Functions | 2 |
| Number of Positions | 257 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP14,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Resistance Law | LINEAR |
| Resistance Tolerance-Max | 20% |
| Resistor Terminal Voltage-Max | 5.5V |
| Screening Level | TS 16949 |
| Supply Current-Max | 0.6mA |
| Supply Voltage-Nom | 2.7V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Coefficient-Nom | 150ppm/°C |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Total Resistance-Nom | 5000Ω |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Philippines, Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many channels does MCP4661-502E/ST have, and what resistance value does each channel provide?
MCP4661-502E/ST contains 2 independent potentiometer channels, each providing a 5 kΩ end-to-end resistance with 256 wiper positions. Each step increments or decrements resistance by approximately 19.5 Ω, giving fine-grained control for gain trimming, offset adjustment, or filter corner frequency tuning in dual-channel analog signal conditioning circuits.
What control interface does MCP4661-502E/ST use, and what advantage does increment/decrement have over absolute-position writes?
MCP4661-502E/ST uses an I2C interface with increment and decrement commands, allowing firmware to step the wiper up or down by 1 of 256 positions per command. This is useful in closed-loop control systems where the MCU continuously adjusts the 5 kΩ wiper toward a target setpoint without needing to calculate or track the absolute register value, simplifying control loop firmware at low I2C bus overhead.
How does MCP4661-502E/ST's non-volatile memory benefit field-calibrated sensor equipment?
The integrated non-volatile EEPROM retains wiper position values when power is removed, so a factory or field calibration of the dual 5 kΩ channels persists through power cycles. In remote sensor stations or industrial transmitters that power-cycle frequently, this eliminates the cost and complexity of storing calibration data externally in a dedicated EEPROM or MCU flash, and ensures the 256-step calibration state is immediately valid within milliseconds of power-on.
For a compact mixed-signal board, how large is the MCP4661-502E/ST footprint, and which lead time should purchasing teams plan for?
MCP4661-502E/ST is housed in a 14-pin TSSOP package with a body width of approximately 4.4 mm and 0.65 mm pin pitch, occupying around 30 mm² of PCB area for both dual 5 kΩ channels. Purchasing teams should plan for a typical factory lead time of 7 weeks from Microchip's authorized distributors, so placing orders at least 2 months ahead of production start ensures uninterrupted supply for mixed-signal boards using this digital potentiometer.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.6800 | $1.68 |
| 100+ | $1.1600 | $116.00 |
| 1000+ | $1.1200 | $1120.00 |
| 5000+ | $1.1100 | $5550.00 |
| 5088+ | $1.1000 | $5596.80 |
| 7584+ | $1.0900 | $8266.56 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”