MCP4641-104E/ST Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP4641-104E/ST is a dual-channel 7-bit digital potentiometer with 100 kΩ end-to-end resistance, 128 steps, non-volatile memory, and increment/decrement interface, packaged in a 14-pin TSSOP for adjustable bias and gain control.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4641-104E/STSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
14
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.9390(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Dual-channel 7-bit digital potentiometer with 100 kΩ end-to-end resistance and 128 steps providing high-impedance programmable resistance for bias and gain adjustment
  • Non-volatile EEPROM wiper storage preserving the programmed position through power cycles without requiring microcontroller re-initialization
  • Increment/decrement push-button compatible interface enabling direct control from discrete switches or GPIO lines without an I2C or SPI bus
  • TSSOP-14 package with 0.1 kHz bandwidth suited for DC and sub-audio frequency programmable resistance in low-noise analog circuits

Applications

The MCP4641-104E/ST suits high-impedance programmable bias networks, adjustable reference voltage dividers, and dual-channel gain control stages in industrial instrumentation and audio equipment. Its non-volatile memory and increment/decrement interface make it practical for panel-mounted controls in consumer electronics where users set a volume or brightness level that must persist after power-off. The TSSOP-14 package allows compact PCB integration alongside precision op-amps and ADCs in mixed-signal measurement boards.

Specifications

Pbfree CodeYes
Manufacturer Package CodeTSSOP-14
Factory Lead Time7Weeks
YTEOL8
Additional FeatureNON-VOLATILE MEMORY
Bandwidth-Nom0.1kHz
Control InterfaceINCREMENT/DECREMENT
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeR-PDSO-G14
JESD-609 Codee3
Number of Functions2
Number of Positions129
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP14,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom2.7V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Total Resistance-Nom100000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginPhilippines, Thailand

Datasheet

MCP4641-104E/ST Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the end-to-end resistance of MCP4641-104E/ST and how does the 128-step resolution translate to a wiper step size?

The MCP4641-104E/ST has a 100 kΩ end-to-end resistance divided into 128 steps, giving a nominal step size of approximately 781 Ω per increment, suitable for high-impedance voltage divider networks, adjustable bias resistors, and precision reference scaling circuits.

How does the increment/decrement interface of MCP4641-104E/ST differ from I2C-based digital potentiometers and when is it advantageous?

The MCP4641-104E/ST uses an up/down increment/decrement interface driven by simple GPIO pulses rather than a serial I2C or SPI protocol, which simplifies firmware, eliminates bus address conflicts, and allows direct connection to momentary push-buttons for manual wiper adjustment without a microcontroller.

Does the MCP4641-104E/ST retain its wiper position if the board loses power unexpectedly?

Yes, the MCP4641-104E/ST stores both wiper positions in on-chip non-volatile EEPROM rated for at least 100 000 write cycles and 200-year data retention, so a sudden power loss or brownout event does not reset the resistance back to mid-scale or default, preserving calibration and user settings.

For a dual-channel LCD contrast and backlight brightness control, how does MCP4641-104E/ST simplify the design compared to two separate single-channel devices?

By integrating 2 independent potentiometer channels with separate wipers in one TSSOP-14 package, the MCP4641-104E/ST halves the IC count, reduces the PCB area, and shares a single power supply decoupling network, compared to using two single-channel devices such as MCP4011, while still providing independent 128-step control over each channel from 0 Ω to 100 kΩ.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.9390
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.4000$1.40
100+$1.0600$106.00
1000+$1.0200$1020.00
5000+$1.0100$5050.00
5088+$0.9480$4823.42
7584+$0.9390$7121.38
pcs
Unit price: $1.4000 · Total: $1.40

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea