MCP4632-503E/UN Microchip Integrated Circuit (Small Outline Packages) In Stock

The MCP4632-503E/UN is a dual-channel I2C digital potentiometer from Microchip, offering 128 steps and 50 kΩ end-to-end resistance in a 10-pin MSOP package. Available in stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4632-503E/UNSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
10
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.7930(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 128-step resolution providing fine-grained resistance control in 50 kΩ, 10 kΩ, and 5 kΩ variants
  • 2-wire I2C serial interface simplifying firmware integration with any microcontroller in just 2 GPIO pins
  • Dual independent wiper channels enabling simultaneous adjustment of 2 signal paths in a single device
  • Compact 10-pin MSOP package minimizing PCB area for portable and embedded system designs

Applications

The MCP4632-503E/UN enables software-controlled gain and offset adjustment in op-amp feedback networks, audio volume control circuits, and programmable filter stages where mechanical potentiometers are impractical. Its dual-channel design allows independent control of two signal paths such as left and right audio channels or two separate sensor calibration trims simultaneously over I2C. Industrial process controllers, medical equipment, and automated test fixtures use this device to digitally program analog circuit parameters during runtime without physical intervention.

Specifications

Manufacturer Package CodeMSOP-10
Factory Lead Time7Weeks
YTEOL9
Additional FeatureTHE RESISTOR ARRAY VALUES ARE 5000 OHM,10000 OHM, 50000 OHM
Bandwidth-Nom2kHz
Control Interface2-WIRE SERIAL
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeS-PDSO-G10
JESD-609 Codee3
Number of Functions1
Number of Positions257
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP10,.19,20
Package ShapeSQUARE
Package StyleSMALL OUTLINE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom3V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Total Resistance-Nom100000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
HTS Code8542.39.00.60
Country of OriginThailand

Datasheet

MCP4632-503E/UN Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many discrete resistance steps does the MCP4632-503E/UN provide, and what is the step size at 50 kΩ full-scale?

The MCP4632-503E/UN provides 128 steps over the full 50 kΩ end-to-end resistance, yielding a step size of approximately 390 Ω per increment. This resolution enables fine-grained gain or offset adjustment in analog circuits, supporting applications where 0.78% of full-scale trimming accuracy is sufficient.

What interface protocol does the MCP4632-503E/UN use, and how does this simplify embedded system integration?

The device uses a 2-wire I2C serial interface, requiring only SCL and SDA connections to any standard microcontroller I2C peripheral. The I2C bus supports multiple devices at speeds up to 400 kHz (fast mode), allowing the digital potentiometer to share the same bus with temperature sensors, EEPROM, and other peripherals without dedicating additional GPIO pins.

For an op-amp gain-control circuit, how does replacing a mechanical 50 kΩ potentiometer with the MCP4632-503E/UN improve system reliability?

Mechanical potentiometers have wear-out mechanisms typically rated for 10,000 to 100,000 cycles and are sensitive to vibration and humidity. The MCP4632-503E/UN has no moving parts, rated for over 1,000,000 wiper write cycles to non-volatile memory, and operates reliably across -40°C to +125°C, dramatically improving long-term reliability in industrial or automotive-adjacent designs.

Can the MCP4632-503E/UN retain its wiper position after power loss, and what is the significance of volatile versus non-volatile storage?

The MCP4632-503E/UN includes non-volatile EEPROM storage for the wiper position, retaining the last programmed resistance setting after power is removed. This means at power-up the circuit returns to its previously configured gain or offset without any microcontroller initialization, which is critical for systems that may restart unexpectedly and must resume normal operation within milliseconds of power restoration.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.7930
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.2000$1.20
100+$0.8900$89.00
1000+$0.8700$870.00
5000+$0.8000$4000.00
7500+$0.7980$5985.00
10000+$0.7930$7930.00
pcs
Unit price: $1.2000 · Total: $1.20

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea