MCP4542-104E/MS Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP4542-104E/MS is a non-volatile 128-step digital potentiometer with 100 kΩ end-to-end resistance in an MSOP-8 package. Uses an increment/decrement interface and retains wiper position through power cycles via built-in EEPROM. Available in stock with worldwide shipping at competitive pricing.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP4542-104E/MSSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.7120(MOQ 100)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of MCP4542-104E/MS?

  • 128-step resolution over 100 kΩ end-to-end resistance for precise digital control of gain, offset, or bias in analog signal paths
  • Non-volatile EEPROM wiper memory retains the last set position through power cycles without requiring re-initialization from a host MCU
  • Increment/decrement serial interface simplifies firmware control with minimal pin count for applications needing coarse resistance adjustment
  • MSOP-8 package provides a compact 3 mm x 3 mm footprint for space-constrained board designs with automated SMT assembly

What is MCP4542-104E/MS used for?

The MCP4542-104E/MS is used in calibration circuits, programmable gain amplifiers, and bias voltage trimmers where a host microcontroller must set and persistently store a resistance value without manual potentiometer adjustment. Its non-volatile wiper memory is particularly valuable in field-calibrated industrial sensors and audio equipment where the last user-set level must be restored after a power outage. The increment/decrement interface and 100 kΩ resistance suit high-impedance analog signal conditioning paths found in instrumentation amplifiers, active filter tuning, and LCD contrast adjustment circuits.

What are the specifications of MCP4542-104E/MS?

Pbfree CodeYes
Manufacturer Package CodeMSOP-8
Factory Lead Time11Weeks
YTEOL9
Additional FeatureNON-VOLATILE MEMORY
Bandwidth-Nom0.1kHz
Control InterfaceINCREMENT/DECREMENT
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeS-PDSO-G8
JESD-609 Codee3
Number of Functions1
Number of Positions129
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP8,.19
Package ShapeSQUARE
Package StyleSMALL OUTLINE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5.5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom2.7V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom150ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
Total Resistance-Nom100000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Where can I find the MCP4542-104E/MS datasheet?

MCP4542-104E/MS Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for MCP4542-104E/MS?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the non-volatile memory in MCP4542-104E/MS prevent resistance loss during power cycles?

The MCP4542-104E/MS stores the wiper position in on-chip EEPROM whenever a write command is issued. When power is restored, the device automatically loads the saved position into the wiper register before entering normal operation, eliminating the need for the host MCU to re-send the calibration value and avoiding any intermediate invalid resistance state during startup.

What resistance resolution does each step of MCP4542-104E/MS provide and how does this affect gain adjustment accuracy?

With 128 steps across a 100 kΩ end-to-end resistance, each increment or decrement step changes the wiper resistance by approximately 781 Ω. In a voltage-divider gain stage, this translates to a gain resolution of roughly 0.78%, which is adequate for audio volume controls, LCD contrast adjustment, and general-purpose calibration circuits but may be insufficient for applications requiring sub-0.1% accuracy.

Which interface protocol does MCP4542-104E/MS use to adjust the wiper and how many control pins are required?

The MCP4542-104E/MS uses a 2-wire increment/decrement interface with a CS chip-select pin and a separate increment/decrement command pin, requiring only 2 or 3 control lines from the host MCU. This minimal interface simplifies firmware compared to SPI or I2C digital potentiometers, making it suitable for microcontrollers with limited available pins or simple state-machine controllers without a full serial bus.

In what bandwidth-limited signal path is MCP4542-104E/MS most appropriate given its 0.1 kHz nominal bandwidth?

The MCP4542-104E/MS is designed for DC and very low-frequency applications with a nominal signal bandwidth of 0.1 kHz (100 Hz). It is most appropriate for DC bias trimming, slowly varying gain adjustments in instrumentation amplifiers, contrast or brightness controls for LCD panels, and calibration potentiometers in precision measurement equipment where signal frequencies remain below 100 Hz.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.7120
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
100+$0.8100$81.00
300+$0.8040$241.20
500+$0.7970$398.50
1000+$0.7880$788.00
5000+$0.7140$3570.00
7500+$0.7120$5340.00
pcs
Unit price: $0.8100 · Total: $81.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea