MCP4141-104E/SN Microchip Integrated Circuit (Small Outline Packages) In Stock
Microchip MCP4141-104E/SN is a single-channel SPI digital potentiometer with 128 steps and 100 kOhm end-to-end resistance in an SOIC-8 package. Supports non-volatile wiper memory and increment/decrement control. Available from stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP4141-104E/SN Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.7070(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP4141-104E/SN?
- Single-channel 100 kOhm digital potentiometer with 128 wiper steps (0 to 127) providing ~787 Ohm per step resolution for fine analog adjustment
- Non-volatile wiper position storage using EEPROM retains the last set resistance through power cycles, eliminating startup calibration routines
- SPI-compatible increment/decrement and direct-write interface supports simple daisy-chain expansion of multiple devices on a single bus
- Wide 1.8 V to 5.5 V supply voltage range with low 1 µA sleep current for battery-powered calibration and trimming applications
- SOIC-8 package with RoHS-compliant, Pb-free construction for automated assembly and standard pick-and-place compatibility
What is MCP4141-104E/SN used for?
The MCP4141-104E/SN is used in audio equipment, sensor calibration circuits, and power supply voltage-adjust loops where a digitally controlled 100 kOhm resistance with 128 steps replaces a manual trimmer potentiometer. Its non-volatile wiper memory ensures that factory-calibrated offsets for ADC reference voltages, op-amp gain stages, or LCD contrast controls are preserved across power cycles without a microcontroller initialization sequence. The device also suits adaptive filter tuning, LCD bias adjustment, and programmable gain amplifier designs in industrial and consumer electronics operating from 1.8 V to 5.5 V.
What are the specifications of MCP4141-104E/SN?
| Pbfree Code | Yes |
| Manufacturer Package Code | SOIC-8 |
| Factory Lead Time | 7Weeks |
| YTEOL | 9 |
| Bandwidth-Nom | 0.1kHz |
| Control Interface | INCREMENT/DECREMENT |
| Converter Type | DIGITAL POTENTIOMETER |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Number of Positions | 129 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Resistance Law | LINEAR |
| Resistance Tolerance-Max | 20% |
| Resistor Terminal Voltage-Max | 5V |
| Supply Current-Max | 1mA |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Coefficient-Nom | 150ppm/°C |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Total Resistance-Nom | 100000Ω |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Mainland China, Thailand |
Where can I find the MCP4141-104E/SN datasheet?
MCP4141-104E/SN Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP4141-104E/SN?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many resistance steps does the MCP4141-104E/SN provide and what is the step resolution?
The MCP4141-104E/SN offers 128 wiper steps across a 100 kOhm end-to-end resistance, yielding approximately 787 Ohm per step. The wiper resistance itself is typically 75 Ohm, so the minimum achievable resistance between wiper and either terminal is around 75 Ohm to 150 Ohm. This resolution is sufficient for audio volume control, LCD contrast adjustment, and sensor bridge trimming where step changes below 1 kOhm are acceptable.
Does the MCP4141-104E/SN retain its wiper position after power is removed?
Yes. The MCP4141 stores the wiper position in an internal EEPROM, which retains the value through power cycles without any external memory or MCU re-initialization. The EEPROM endurance is rated at 100,000 write cycles and data retention exceeds 40 years, making the device reliable for factory calibration of gain trims and offset adjustments that should not drift between power-on events in field-deployed equipment.
What control interface does the MCP4141-104E/SN use and can multiple devices share one SPI bus?
The device uses an SPI-compatible 3-wire interface (SCK, SDI, CS) supporting increment, decrement, and direct-write commands at clock rates up to several MHz. Multiple MCP4141 devices can be daisy-chained on a shared SPI bus by connecting the SDO output of one device to the SDI input of the next, allowing an MCU to update a chain of 100 kOhm potentiometers with a single CS assertion and sequential 16-bit transfers.
What supply voltage range is required for the MCP4141-104E/SN and does it support 3.3 V MCU logic?
The MCP4141-104E/SN operates from 1.8 V to 5.5 V, making it directly compatible with 3.3 V and 5 V microcontroller I/O without level shifters. At 1.8 V supply, the SPI logic thresholds scale accordingly, so it also works with low-power 1.8 V MCU platforms used in wearables and energy-harvesting nodes. Typical quiescent current is under 1 µA in standby, contributing negligible drain to coin-cell-powered designs.
How does the MCP4141-104E/SN compare to a mechanically trimmed potentiometer in a production calibration workflow?
Unlike a mechanical trimmer requiring physical access and a screwdriver, the MCP4141 accepts calibration commands over the SPI bus from automated test equipment, enabling in-system calibration at the end of a production line without board handling. The 128-step, 100 kOhm resolution replaces a 25-turn cermet trimmer in most gain and offset trim applications, and the non-volatile EEPROM stores the result permanently. This cuts calibration cycle time to under 1 ms per device versus several seconds for manual adjustment.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.0700 | $1.07 |
| 100+ | $0.8100 | $81.00 |
| 1000+ | $0.7900 | $790.00 |
| 5000+ | $0.7140 | $3570.00 |
| 7500+ | $0.7120 | $5340.00 |
| 10000+ | $0.7070 | $7070.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit