MCP41100-E/SN Microchip Integrated Circuit (Small Outline Packages) In Stock

Microchip MCP41100-E/SN is a single-channel 100kΩ SPI digital potentiometer with 256 positions in an 8-pin SOIC package. Features 3-wire SPI interface and operates from 2.7 V to 5.5 V supply. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP41100-E/SNSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.5000(MOQ 1)
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of MCP41100-E/SN?

  • Single-channel 100 kΩ end-to-end resistance with 256 wiper positions for fine-resolution digital control
  • 3-wire SPI interface supporting up to 10 MHz clock for fast microcontroller integration
  • 2.7 V to 5.5 V supply range enabling use in both 3.3 V and 5 V embedded systems

What is MCP41100-E/SN used for?

The MCP41100 is a digitally-controlled potentiometer used to replace mechanical trimmers in analog calibration and signal conditioning circuits. It is widely deployed in programmable gain amplifiers, LCD contrast adjusters, and bias voltage tuning where remote SPI control from a microcontroller is preferred over manual adjustment. The compact SOIC-8 package simplifies integration into mixed-signal PCB designs requiring on-the-fly resistance adjustment.

What are the specifications of MCP41100-E/SN?

Pbfree CodeYes
Manufacturer Package CodeSOIC-8
Factory Lead Time6Weeks
YTEOL10
Bandwidth-Nom0.145kHz
Control Interface3-WIRE SERIAL
Converter TypeDIGITAL POTENTIOMETER
JESD-30 CodeR-PDSO-G8
JESD-609 Codee3
Number of Functions1
Number of Positions256
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOP8,.23
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Resistance LawLINEAR
Resistance Tolerance-Max20%
Resistor Terminal Voltage-Max5V
Screening LevelTS 16949
Supply Current-Max0.6mA
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature Coefficient-Nom800ppm/°C
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch1.27mm
Terminal PositionDUAL
Total Resistance-Nom100000Ω
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
HTS Code8542.39.00.60
Country of OriginThailand

Where can I find the MCP41100-E/SN datasheet?

MCP41100-E/SN Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for MCP41100-E/SN?

Compatible alternatives and drop-in replacements for MCP41100-E/SN:

MCP41100-I/SNMicrochip Technology Inc

Digital Potentiometer, 1 Func, 100000ohm, 3-wire Serial Control Interface, 256 Positions, CMOS, PDSO8

View Part →

Frequently Asked Questions

How many resistance positions does the MCP41100 provide and what is the step resolution for a 100 kΩ potentiometer?

The MCP41100 provides 256 wiper positions across its 100 kΩ end-to-end resistance, giving a step resolution of approximately 391 Ω per LSB. This fine granularity supports precise analog calibration in applications such as programmable gain stages, filter cutoff tuning, and closed-loop bias adjustment where resistor values must be set to within 0.4% increments.

Can the MCP41100 be daisy-chained with other SPI digital potentiometers on a shared 3-wire bus?

Yes, the MCP41100 supports SPI daisy-chaining through its SDO pin, allowing multiple devices to share a single CS line in serial cascade. Each device uses an 8-bit command plus 8-bit data word totaling 16 bits, and the SPI bus supports clock speeds up to 10 MHz, enabling rapid sequential programming of 4 or more potentiometers with minimal microcontroller bus overhead.

When is the MCP41100-E/SN preferred over a mechanical trimmer in a volume production calibration workflow?

The MCP41100-E/SN is preferred when calibration must be performed in-circuit via software after board assembly, eliminating the need for mechanical access. In volume production, automated calibration routines can program the 256-step wiper value over SPI in under 1 µs per write cycle, cutting calibration time by orders of magnitude compared to manual trimmer adjustment with a screwdriver.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.5000
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.5157$1.52
1000+$1.5100$1510.00
5000+$1.5000$7500.00
pcs
Unit price: $1.5157 · Total: $1.52

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea