MCP2515T-I/ST Microchip Integrated Circuit (Small Outline Packages) In Stock

The MCP2515T-I/ST is a stand-alone CAN bus controller from Microchip Technology supporting CAN 2.0B protocol at up to 1 Mbps data rate. It interfaces to microcontrollers via SPI at up to 10 MHz and comes in a 20-pin TSSOP package, making it ideal for automotive and industrial network nodes.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP2515T-I/STSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
20
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.9200(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of MCP2515T-I/ST?

  • Stand-alone CAN 2.0B controller with up to 1 Mbps bus speed
  • SPI interface up to 10 MHz for easy microcontroller integration
  • 2 receive buffers and 3 transmit buffers for message queuing
  • 6 configurable acceptance filters and 2 masks for message filtering
  • 20-pin TSSOP package for compact SMT PCB layouts
  • One-shot mode and loopback mode for system testing and development

What is MCP2515T-I/ST used for?

The MCP2515T-I/ST is widely deployed in automotive body control modules, industrial PLCs, and robotics systems requiring CAN bus connectivity from any SPI-capable microcontroller. It enables cost-effective CAN node implementation in HVAC controllers, motor drives, and distributed sensor networks without requiring a CAN-integrated MCU.

What are the specifications of MCP2515T-I/ST?

Pbfree CodeYes
Manufacturer Package CodeTSSOP-20
Factory Lead Time2Weeks
YTEOL9
Boundary ScanNO
Bus CompatibilitySPI
Clock Frequency-Max40MHz
Communication ProtocolSYNC; BIT ;BYTE
Data Encoding/Decoding MethodNRZ
Data Transfer Rate-Max0.125MBps
JESD-30 CodeR-PDSO-G20
JESD-609 Codee3
Low Power ModeYES
Number of Serial I/Os1
On Chip Data RAM Width8
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP20,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
RAM (words)14
Supply Current-Max10mA
Supply Voltage-Max5.5V
Supply Voltage-Min4.5V
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
uPs/uCs/Peripheral ICs TypeSERIAL IO/COMMUNICATION CONTROLLER, LAN
## MCP2515T-I/ST Alternates Showing resultsImage
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginPhilippines, Thailand

Where can I find the MCP2515T-I/ST datasheet?

MCP2515T-I/ST Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for MCP2515T-I/ST?

Compatible alternatives and drop-in replacements for MCP2515T-I/ST:

MCP2515T-E/STMicrochip Technology Inc

Serial I/O Controller, 1 Channel(s), 0.125MBps, CMOS, PDSO20

View Part →

Frequently Asked Questions

What is the maximum CAN bus data rate supported by MCP2515T-I/ST and how does it connect to a host MCU?

The MCP2515T-I/ST supports CAN 2.0B at up to 1 Mbps bus speed and connects to the host microcontroller through a standard SPI interface running at up to 10 MHz clock. This makes it compatible with virtually any MCU family that has an SPI peripheral, including PIC, AVR, ARM, and ESP32 platforms.

How many message buffers does MCP2515T-I/ST provide for managing CAN bus traffic in automotive nodes?

The MCP2515T-I/ST provides 2 dedicated receive buffers and 3 transmit buffers, plus 6 acceptance filters and 2 masks. This allows the controller to queue incoming messages and filter by 11-bit or 29-bit CAN identifiers, reducing interrupt load on the host MCU in busy CAN network environments.

For a compact automotive PCB with limited space, how does the TSSOP-20 package compare to DIP alternatives?

The TSSOP-20 package used in MCP2515T-I/ST measures approximately 6.5 mm × 4.4 mm with 20 pins on a 0.65 mm pitch, requiring significantly less board area than the PDIP-18 alternative. This smaller footprint suits automotive ECU and industrial gateway boards where PCB space is at a premium.

What lead time should procurement teams expect for MCP2515T-I/ST when planning automotive production schedules?

The MCP2515T-I/ST has a factory lead time of approximately 2 weeks from Microchip, which is relatively short compared to many specialized ICs. Automotive production buyers can typically source from authorized distributors with available stock, though high-volume seasonal demand may extend delivery windows.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.9200
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$1.9635$1.96
1000+$1.9300$1930.00
5000+$1.9200$9600.00
pcs
Unit price: $1.9635 · Total: $1.96

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea