MCP2200T-I/SS Microchip Integrated Circuit (Small Outline Packages) In Stock

MCP2200T-I/SS is a USB-to-UART serial converter IC in a 20-pin SSOP package supporting up to 1.5 Mbps data transfer, offering plug-and-play USB connectivity for embedded systems worldwide.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP2200T-I/SSSmall Outline Packages
Quick Facts
Manufacturer
Microchip
Package
Small Outline Packages
Pin Count
20
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.9100(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of MCP2200T-I/SS?

  • Full-speed USB 2.0 to UART bridge operating at up to 1.5 Mbps eliminates external USB controllers in serial designs
  • Integrated 12 MHz clock removes the need for an external crystal, simplifying PCB layout and reducing BOM cost
  • 20-pin SSOP package with GP I/O pins allows hardware flow control and LED status indication without external logic
  • RoHS-compliant, lead-free construction with JESD-609 e3 moisture sensitivity supports modern green manufacturing

What is MCP2200T-I/SS used for?

The MCP2200T-I/SS is widely used in USB-to-serial adapter dongles, programming interfaces for microcontrollers, and industrial debug consoles that need reliable PC connectivity. It suits battery-powered IoT prototypes and data-logger designs where a simple UART peripheral must connect to a USB host at up to 1.5 Mbps without firmware USB stacks. The device also appears in test-and-measurement equipment front panels and POS terminals requiring a compact, low-cost serial bridge.

What are the specifications of MCP2200T-I/SS?

Pbfree CodeYes
Manufacturer Package CodeSSOP-20
Factory Lead Time7Weeks
YTEOL8
Bus CompatibilityUART; USB
Clock Frequency-Max12MHz
Data Transfer Rate-Max1.5MBps
JESD-30 CodeR-PDSO-G20
JESD-609 Codee3
Package Body MaterialPLASTIC/EPOXY
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Supply Current-Max15mA
Supply Voltage-Max5.5V
Supply Voltage-Min3V
Supply Voltage-Nom3.3V
Surface MountYES
TechnologyCMOS
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)40
uPs/uCs/Peripheral ICs TypeBUS CONTROLLER, UNIVERSAL SERIAL BUS
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginPhilippines, Thailand

Where can I find the MCP2200T-I/SS datasheet?

MCP2200T-I/SS Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for MCP2200T-I/SS?

Compatible alternatives and drop-in replacements for MCP2200T-I/SS:

MCP2200T-E/SSMicrochip Technology Inc

USB Bus Controller, CMOS, PDSO20

View Part →
MCP2200-E/SSMicrochip Technology Inc

USB Bus Controller, CMOS, PDSO20

View Part →

Frequently Asked Questions

What is the maximum data transfer rate of the MCP2200T-I/SS USB-to-UART bridge?

The MCP2200T-I/SS supports baud rates up to 1.5 Mbps over its UART interface, matching full-speed USB 2.0 throughput. This rate is more than sufficient for most serial debug consoles, firmware-programming adapters, and industrial data-acquisition links that typically operate below 115,200 baud.

Does the MCP2200T-I/SS require an external crystal oscillator to function?

No external crystal is needed. The MCP2200T-I/SS integrates an internal 12 MHz oscillator that synchronizes directly to the USB host clock, saving one passive component and eliminating crystal-placement constraints on the PCB while maintaining timing accuracy within the USB full-speed specification.

How many general-purpose I/O pins are available on the MCP2200T-I/SS, and what can they control?

The device provides 8 GP I/O pins configurable as inputs or outputs. These pins can drive RX/TX status LEDs, implement hardware flow-control lines such as RTS and CTS, or serve as GPIO for auxiliary logic, reducing the need for a secondary I/O expander in compact USB adapter designs.

Which package does the MCP2200T-I/SS use, and how does it affect board integration?

The part comes in a 20-pin SSOP package with a 0.635 mm pitch, occupying roughly 7.5 mm × 5.3 mm of PCB area. The fine-pitch SSOP footprint fits compact USB adapter PCBs while remaining hand-solderable, making it practical for prototype builds as well as high-volume automated assembly.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.9100
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.8600$2.86
10+$2.6200$26.20
25+$2.4000$60.00
100+$1.9700$197.00
500+$1.9394$969.70
1000+$1.9100$1910.00
pcs
Unit price: $2.8600 · Total: $2.86

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea