MCP1755S-3302E/DB Microchip Power Supply (SOT223 (3-Pin)) In Stock
The MCP1755S-3302E/DB is a fixed 3.3 V LDO linear voltage regulator delivering up to 300 mA output with only 300 mV typical dropout, accepting 3.6 V to 16 V input, in a SOT-223-3 package for compact, low-noise power supply designs.
- Manufacturer
- Microchip
- Package
- SOT223 (3-Pin)
- Pin Count
- 3
- Lifecycle
- ACTIVE
- Datasheet
- MCP1755S-3302E/DB Datasheet PDF
- Category
- Power Supply
- Price
- From $0.6500(MOQ 5)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP1755S-3302E/DB?
- Fixed 3.3 V output with ±0.5% initial accuracy and 300 mV typical dropout voltage, allowing efficient regulation from 3.6 V input rails with minimal headroom
- 300 mA output current capability in a thermally enhanced SOT-223-3 package, supporting microcontrollers, sensors, and low-power RF modules without an external heatsink
- Wide 3.6 V to 16 V input range accommodating unregulated wall adapters, 9 V batteries, and 12 V automotive or industrial supply rails in a single device
- Low quiescent current and RoHS-compliant lead-free construction, making it suitable for always-on IoT nodes and green-energy-rated consumer products
What is MCP1755S-3302E/DB used for?
The MCP1755S-3302E/DB is used to derive a stable 3.3 V rail from higher unregulated or loosely regulated supply sources in embedded systems, wireless sensor nodes, and point-of-load regulation on industrial I/O cards. Its 300 mA rating and SOT-223-3 footprint also make it a practical post-regulator following a switching converter to suppress ripple and provide a low-noise 3.3 V supply for ADCs, RF transceivers, and precision analog front-ends.
What are the specifications of MCP1755S-3302E/DB?
| Manufacturer Package Code | SOT-223-3 |
| Factory Lead Time | 7Weeks |
| YTEOL | 14 |
| Adjustability | FIXED |
| Dropout Voltage1-Max | 0.5V |
| Dropout Voltage1-Nom | 0.3V |
| Input Voltage Absolute-Max | 17.6V |
| Input Voltage-Max | 16V |
| Input Voltage-Min | 3.6V |
| JESD-30 Code | R-PDSO-G3 |
| JESD-609 Code | e3 |
| Line Regulation-Max | 0.02046% |
| Load Regulation-Max | 0.0165% |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Operating Temperature TJ-Max | 150°C |
| Operating Temperature TJ-Min | -40 °C |
| Output Current1-Max | 0.3A |
| Output Voltage1-Max | 3.366V |
| Output Voltage1-Min | 3.234V |
| Output Voltage1-Nom | 3.3V |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOT-223 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR |
| Screening Level | AEC-Q100 |
| Surface Mount | YES |
| Technology | CMOS |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 2.3mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Voltage Tolerance-Max | 2% |
| Package | SOT223 (3-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP1755S-3302E/DB datasheet?
MCP1755S-3302E/DB Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP1755S-3302E/DB?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the dropout voltage of MCP1755S-3302E/DB, and what minimum input voltage is needed to maintain a regulated 3.3 V output?
The MCP1755S-3302E/DB has a typical dropout voltage of 300 mV, with a maximum of 500 mV. To guarantee a regulated 3.3 V output under all conditions, the input must stay at or above 3.8 V. This makes it compatible with the tail end of a 3.6 V lithium battery and with 5 V bus supplies found on Arduino-class development boards.
How much output current can MCP1755S-3302E/DB supply continuously, and is the SOT-223 package sufficient for full-load operation?
The MCP1755S-3302E/DB provides up to 300 mA of continuous output current. The SOT-223-3 package has a thermal pad that allows heat dissipation into the PCB copper. At the maximum 16 V input with 3.3 V output and 300 mA load, power dissipation is approximately 3.8 W, so a copper pour of at least 4 cm² is recommended to keep junction temperature below +125°C.
Can MCP1755S-3302E/DB be powered directly from a 12 V wall adapter or car accessory socket?
Yes. The MCP1755S-3302E/DB accepts input voltages up to 16 V continuously, with an absolute maximum of 17.6 V. A 12 V wall adapter or 12 V automotive accessory rail—which can rise to 14.4 V during charging—falls within its operating range, allowing the device to directly supply a regulated 3.3 V to microcontrollers or sensors in vehicle accessories without an intermediate pre-regulator.
How does MCP1755S-3302E/DB compare to a switching regulator when used as a post-filter behind a 5 V switcher for ADC supply noise?
When used as a linear post-regulator after a 5 V switching converter, the MCP1755S-3302E/DB rejects high-frequency switching ripple typically above 50 dB PSRR at low frequencies, producing a clean 3.3 V output with less than 50 µVRMS noise. A switching-only approach requires additional LC filtering of 10 µH or more to achieve comparable noise performance, whereas the LDO achieves this with only two small bypass capacitors.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 5+ | $0.9100 | $4.55 |
| 25+ | $0.7600 | $19.00 |
| 100+ | $0.6900 | $69.00 |
| 1000+ | $0.6500 | $650.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
BD33GC0WEFJ-E2
ROHM Semiconductor
Power Supply
TMF 10115
Traco Power
Power Supply
TMF 10112
Traco Power
Power Supply
TNY275GN-TL
Power Integrations
Power Supply
SCW03C-12
Mean Well
Power Supply
SCW03A-12
Mean Well
Power Supply
V150C28C150BL
VICOR
Power Supply
V150C24C150BL
VICOR
Power Supply
TMG 30115
Traco Power
Power Supply
TMG 30103
Traco Power
Power Supply
THM 10-1212
Traco Power
Power Supply
THM 10-4811
Traco Power
Power Supply
THM 10-1213
Traco Power
Power Supply
THM 10-0511
Traco Power
Power Supply
THM 10-1215
Traco Power
Power Supply
THM 10-1222
Traco Power
Power Supply
THM 10-2422
Traco Power
Power Supply
THM 10-0523
Traco Power
Power Supply
THM 10-1223
Traco Power
Power Supply
THM 10-4822
Traco Power
Power Supply
THM 10-2410
Traco Power
Power Supply
THM 10-2412
Traco Power
Power Supply
THM 10-4810
Traco Power
Power Supply
THM 10-0513
Traco Power
Power Supply