MCP1726-1802E/MF Microchip Integrated Circuit (Small Outline No-lead) In Stock
Microchip MCP1726-1802E/MF is a 1A fixed 1.8V LDO linear regulator with power-good output in an 8-pin DFN package. It features 220mV typical dropout voltage at full load and operates from 2.3V to 6V input. Available from stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline No-lead
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP1726-1802E/MF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.6930(MOQ 1)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP1726-1802E/MF?
- 1A output current with only 220mV typical dropout voltage at full load, enabling high-efficiency operation
- Integrated power-good (PG) output flag signals when output voltage is within regulation, simplifying system sequencing
- Ultra-compact 8-pin DFN package (3x2 mm) reduces PCB footprint in space-constrained portable and IoT designs
What is MCP1726-1802E/MF used for?
The MCP1726-1802E/MF is well suited for powering 1.8V logic rails in portable electronics, IoT sensor nodes, and microcontroller-based systems where board space is limited. Its low 220mV dropout makes it ideal for single-cell Li-ion or regulated 3.3V-to-1.8V conversion applications. The power-good output simplifies processor reset sequencing and supervisor circuit designs.
What are the specifications of MCP1726-1802E/MF?
| Pbfree Code | Yes |
| Manufacturer Package Code | DFN-8 |
| Factory Lead Time | 7Weeks |
| YTEOL | 8 |
| Adjustability | FIXED |
| Dropout Voltage1-Max | 0.5V |
| Dropout Voltage1-Nom | 0.22V |
| Input Voltage Absolute-Max | 6.5V |
| Input Voltage-Max | 6V |
| Input Voltage-Min | 2.3V |
| JESD-30 Code | S-PDSO-N8 |
| JESD-609 Code | e3 |
| Line Regulation-Max | 0.01998% |
| Load Regulation-Max | 0.027% |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Operating Temperature TJ-Max | 125°C |
| Operating Temperature TJ-Min | -40 °C |
| Output Current1-Max | 1A |
| Output Voltage1-Max | 1.836V |
| Output Voltage1-Min | 1.764V |
| Output Voltage1-Nom | 1.8V |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC8,.11,26 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR |
| Surface Mount | YES |
| Technology | CMOS |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Voltage Tolerance-Max | 2% |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Philippines, Thailand |
Where can I find the MCP1726-1802E/MF datasheet?
MCP1726-1802E/MF Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP1726-1802E/MF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the maximum continuous output current the MCP1726-1802E/MF can deliver, and what dropout voltage should I budget at full load?
The MCP1726-1802E/MF delivers up to 1A continuous output current. At full 1A load, the typical dropout voltage is 220mV and the maximum is 500mV, so you need at least 2.3V input to maintain a regulated 1.8V output across all process and temperature corners.
Can MCP1726-1802E/MF regulate from a 3.3V supply down to 1.8V in a battery-powered IoT device operating over a -40°C to +125°C temperature range?
Yes. With a 3.3V input the device has roughly 1.5V of headroom against the 500mV worst-case dropout, providing a comfortable margin at 1A across the full -40°C to +125°C industrial temperature range. The DFN-8 package also dissipates heat efficiently on compact PCBs.
How does the power-good (PG) pin work on the MCP1726, and what pull-up resistor value should I use?
The PG pin is an open-drain output that pulls low when the output voltage falls more than approximately 8% below the nominal 1.8V set point. Connect it through a 100kΩ pull-up resistor to any available rail up to 6V. The resulting logic signal can drive a microcontroller reset pin or a supervisor IC directly, with no additional comparator circuits required.
When is MCP1726-1802E/MF a better choice than a switching regulator for 1.8V generation from 3.3V?
For output currents up to 1A and input-to-output differentials of 1.5V, the LDO power dissipation is only 1.5W maximum, which is acceptable in many applications. The MCP1726 eliminates inductor, bootstrap capacitor, and EMI filtering costs, reducing BOM by 4–6 components while occupying under 20mm² of board area. It is the preferred choice when EMI sensitivity or design simplicity outweighs efficiency.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $2.0800 | $2.08 |
| 3+ | $1.5600 | $4.68 |
| 17+ | $1.3000 | $22.10 |
| 25+ | $1.0900 | $27.25 |
| 100+ | $0.7100 | $71.00 |
| 600+ | $0.6930 | $415.80 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit