MCP111T-315E/TT Microchip Integrated Circuit (SOT23 (3-Pin)) In Stock

Microchip MCP111T-315E/TT is a single-channel voltage supervisor and detector in a SOT-23 3-pin package that monitors supply rails between 3.003 V and 3.157 V and asserts a manual reset output when voltage falls out of range. It targets microcontroller reset circuits, 3.3 V power sequencing, and brown-out protection in embedded systems.

ACTIVEIntegrated CircuitVerified May 2026
Package / Visual Reference
MCP111T-315E/TTSOT23 (3-Pin)
Quick Facts
Manufacturer
Microchip
Package
SOT23 (3-Pin)
Pin Count
3
Lifecycle
ACTIVE
Category
Integrated Circuit
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Single-channel voltage supervisor monitoring 3.003 V to 3.157 V rail
  • Asserts manual reset output on undervoltage detection without watchdog timer
  • Fixed-threshold design eliminates external resistors for threshold setting
  • SOT-23 3-pin package for minimal PCB footprint in space-constrained boards
  • RoHS-compliant SOT-23-3 package with JEDEC e3 lead-free qualification

Applications

The MCP111T-315E/TT is designed for microcontroller and processor reset supervision in 3.3 V embedded systems, ensuring reliable power-on reset and brown-out detection when the supply voltage drops below the 3.003 V threshold. It is commonly used in IoT sensor nodes, portable medical devices, and industrial control boards where a compact, low-component-count voltage monitoring solution is needed to prevent controller lockup during power supply disturbances.

Specifications

Pbfree CodeYes
Manufacturer Package CodeSOT-23-3
Factory Lead Time6Weeks
YTEOL8
Additional FeatureMNL RST:N;PW FL IO:N;PRG RST DLY:N;WD:N;WDO:N;WWD:N
Adjustable ThresholdNO
Analog IC - Other TypeVOLTAGE DETECTOR
JESD-30 CodeR-PDSO-G3
JESD-609 Codee3
Number of Channels1
Number of Functions1
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTO-236
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Screening LevelTS 16949
Supply Current-Max (Isup)0.00175mA
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)1V
Supply Voltage-Nom (Vsup)3V
Surface MountYES
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.96mm
Terminal PositionDUAL
Threshold Voltage-Nom+3.08V
PackageSOT23 (3-Pin)

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Datasheet

MCP111T-315E/TT Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

Over what voltage window does the MCP111T-315E/TT supervise the supply rail?

The MCP111T-315E/TT monitors a supply voltage window from 3.003 V to 3.157 V, centered on a nominal 3.08 V threshold. When the monitored rail drops below 3.003 V, the device asserts its reset output to hold the microcontroller in a safe reset state, preventing undefined firmware behavior during brown-out conditions or slow power-down sequences.

Does the MCP111T-315E/TT support an adjustable reset threshold, and when does that matter?

No, the MCP111T-315E/TT uses a fixed threshold between 3.003 V and 3.157 V and does not support an adjustable threshold. This simplifies design by eliminating the resistor divider required for programmable supervisors, reducing BOM cost and board space. It is the correct choice when the target microcontroller operates from a standard 3.3 V rail and a fixed supervision point is acceptable.

Which package does the MCP111T-315E/TT use and how compact is it relative to other supervisor ICs?

The MCP111T-315E/TT uses a SOT-23 3-pin package, one of the smallest standard surface-mount packages with a body approximately 3 mm x 1.75 mm. With only 3 pins needed for supply input, ground, and reset output, it occupies minimal PCB real estate, making it suitable for battery-powered wearables, IoT modules, and microcontroller reset circuits where board space is at a premium.

Does the MCP111T-315E/TT include a watchdog timer or programmable reset delay?

No, the MCP111T-315E/TT does not include a watchdog timer, watchdog output, programmable reset delay, or power-fail I/O. It is a simple fixed-threshold voltage detector that generates a manual reset signal when the 3.3 V supply falls below 3.003 V. For designs requiring watchdog functionality or programmable delay times in the millisecond to second range, a more feature-rich supervisor IC from the MCP1xx family would be needed.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea