MCP102T-315E/TT Microchip Integrated Circuit (SOT23 (3-Pin)) In Stock

MCP102T-315E/TT is a push-pull output voltage supervisory and reset IC with a fixed 3.15 V threshold and 150 ms reset timeout. Housed in a compact 3-pin SOT-23 package. Available from stock worldwide with short lead times and competitive pricing.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP102T-315E/TTSOT23 (3-Pin)
Quick Facts
Manufacturer
Microchip
Package
SOT23 (3-Pin)
Pin Count
3
Lifecycle
ACTIVE
Category
Integrated Circuit
Temp Range
-40.0°C to 125.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Fixed 3.15 V reset threshold with push-pull active-low output eliminates external discrete reset circuitry in 3.3 V microcontroller systems
  • 150 ms minimum reset timeout provides reliable power-on stabilization for processors and FPGAs requiring clean reset assertion
  • Ultra-compact 3-pin SOT-23 package occupies under 5 mm² of PCB area, ideal for battery-powered and space-constrained embedded designs

Applications

MCP102T-315E/TT is designed for microcontroller and microprocessor reset management in battery-powered consumer electronics, handheld instruments, and IoT edge devices running on 3.3 V rails. It provides automatic system reset when supply voltage drops below 3.15 V, ensuring reliable startup and brownout recovery without firmware intervention. The single-channel push-pull output directly drives the RESET pin of most MCUs, simplifying board design in small form-factor products.

Specifications

Pbfree CodeYes
Manufacturer Package CodeSOT-23-3
Factory Lead Time6Weeks
YTEOL9
Additional FeatureBAT BUP SW:N;MNL RST:N;OV DET:N;PW FL IP:N;PW FL IO:N;PW FL OP:N;PRG RST DLY:N;UV DET:N;WD:N;WWD:N
Adjustable ThresholdNO
Analog IC - Other TypeVOLTAGE SUPERVISOR/RESET IC
JESD-30 CodeR-PDSO-G3
JESD-609 Codee3
Number of Channels1
Number of Functions1
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTO-236
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Screening LevelTS 16949
Supply Current-Max (Isup)0.02mA
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)1V
Supply Voltage-Nom (Vsup)3V
Surface MountYES
Temperature GradeAUTOMOTIVE
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.95mm
Terminal PositionDUAL
Threshold Voltage-Nom+3.08V
Time@Peak Reflow Temperature-Max (s)40
PackageSOT23 (3-Pin)

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginThailand

Datasheet

MCP102T-315E/TT Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for MCP102T-315E/TT:

Frequently Asked Questions

What reset threshold voltage does MCP102T-315E/TT monitor and how accurate is it across temperature?

MCP102T-315E/TT monitors the supply voltage against a fixed 3.15 V reset threshold with a typical accuracy of ±2% across the full -40°C to +125°C operating temperature range. When VCC falls below 3.15 V, the push-pull RESET output asserts low within microseconds, holding the system in reset until the supply recovers and the 150 ms timeout elapses.

How long does MCP102T-315E/TT hold the reset signal active after power is restored to the monitored rail?

MCP102T-315E/TT holds the RESET output asserted for a minimum 150 ms reset timeout period after VCC rises above the 3.15 V threshold. This 150 ms window ensures that oscillators, voltage regulators, and memory devices complete their startup sequences before the MCU begins executing code, preventing initialization errors common in fast-ramp power supplies.

For a 3.3 V ARM Cortex-M microcontroller design, when would MCP102T-315E/TT be preferred over an adjustable threshold supervisor?

MCP102T-315E/TT is preferred when the MCU reset threshold is standardized at 3.15 V, eliminating the need for external resistors to program the trip point and reducing component count by 2-3 parts. For a Cortex-M system drawing 1 mA to 50 mA from a 3.3 V Li-ion or regulated rail, the fixed-threshold design lowers BOM cost and assembly risk versus adjustable alternatives.

What package does MCP102T-315E/TT use and what does the /TT suffix indicate for ordering?

MCP102T-315E/TT is packaged in a 3-pin SOT-23 surface-mount package measuring 2.9 mm × 1.3 mm, one of the smallest available for supervisory ICs. The /TT suffix indicates tape-and-reel packaging in quantities of 3000 units per reel, supporting automated pick-and-place assembly in high-volume manufacturing without manual component handling.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea