MBRA130LT3GAlternatives & Equivalent Parts
About MBRA130LT3G
MBRA130LT3G is a Diode component manufactured by ON Semiconductor. It comes in a Diodes Moulded package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for MBRA130LT3G — response within 24 hours.
Specification Comparison
| Parameter | MBRA130LT3GSource | UCC38C42DR | PIC16F877A-I/L | DS90UB960WRTDTQ1 | TLV341IDRLR |
|---|---|---|---|---|---|
| Manufacturer | ON Semiconductor | Texas Instruments | Microchip | Texas Instruments | Texas Instruments |
| Package Type | Diodes Moulded | Small Outline Packages | Plastic Leaded Chip Carrier | Quad Flat No-Lead | SOT23 (6-Pin) |
| Pin Count | 2 | 8 | 44 | 65 | 6 |
| Temperature Range | -55.0°C ~ 125.0°C | ~ 70.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 105.0°C | -40.0°C ~ 125.0°C |
| Price | $0.0533 | $0.4128 | $7.6375 | $15.7910 | $0.3150 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| Pbfree Code | Yes | Yes | Yes | Yes | Yes |
| Manufacturer Package Code | 403D-02 | — | PLCC-44 | — | — |
| YTEOL | 6 | 15 | 8 | 15 | 15 |
| Additional Feature | FREE WHEELING DIODE | ALSO OPERATES IN CURRENT MODE | OPERATES AT 4 V MINIMUM SUPPLY | IT ALSO OPERATES WITH SUPPLY VOLTAGE=1.8 V | — |
| Application | GENERAL PURPOSE | — | — | — | — |
| Breakdown Voltage-Min | 30 V | — | — | — | — |
| Configuration | SINGLE | — | — | — | — |
| Diode Element Material | SILICON | — | — | — | — |
| Diode Type | RECTIFIER DIODE | — | — | — | — |
| Forward Voltage-Max (VF) | 0.47 V | — | — | — | — |
| JESD-30 Code | R-PDSO-C2 | R-PDSO-G8 | S-PQCC-J44 | S-PQCC-N64 | R-PDSO-F6 |
| JESD-609 Code | e3 | e4 | e3 | e4 | e4 |
| Non-rep Pk Forward Current-Max | 25 A | — | — | — | — |
| Number of Elements | 1 | — | — | — | — |
| Number of Phases | 1 | — | — | — | — |
| Output Current-Max | 1 A | 1 A | — | — | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR | RECTANGULAR | SQUARE | SQUARE | RECTANGULAR |
| Package Style | SMALL OUTLINE | SMALL OUTLINE | CHIP CARRIER | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 | 260 | — | 260 | 260 |
| Qualification Status | Not Qualified | Not Qualified | Not Qualified | — | Not Qualified |
| Rep Pk Reverse Voltage-Max | 30 V | — | — | — | — |
| Reverse Current-Max | 1000 µA | — | — | — | — |
| Reverse Test Voltage | 30 V | — | — | — | — |
| Surface Mount | YES | YES | YES | YES | YES |
| Technology | SCHOTTKY | BICMOS | CMOS | CMOS | CMOS |
| Terminal Finish | Matte Tin (Sn) - annealed | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Terminal Form | C BEND | GULL WING | J BEND | NO LEAD | FLAT |
| Terminal Position | DUAL | DUAL | QUAD | QUAD | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 | 30 | — | 30 | 30 |
| Analog IC - Other Type | — | SWITCHING CONTROLLER | — | — | — |
| Control Mode | — | CURRENT-MODE | — | — | — |
| Control Technique | — | PULSE WIDTH MODULATION | — | — | — |
| Input Voltage-Max | — | 18 V | — | — | — |
| Input Voltage-Min | — | 12 V | — | — | — |
| Input Voltage-Nom | — | 15 V | — | — | — |
| Number of Functions | — | 1 | — | 4 | 1 |
| Output Voltage-Max | — | 18 V | — | — | — |
| Package Equivalence Code | — | SOP8,.25 | LDCC44,.7SQ | LCC64,.35SQ,20 | FL6,.047,20 |
| Supply Current-Max (Isup) | — | 3 mA | — | — | — |
| Supply Voltage-Max (Vsup) | — | 18 V | — | — | — |
| Switcher Configuration | — | SINGLE | — | — | — |
| Switching Frequency-Max | — | 1000 kHz | — | — | — |
| Temperature Grade | — | COMMERCIAL | INDUSTRIAL | INDUSTRIAL | AUTOMOTIVE |
| Terminal Pitch | — | 1.27 mm | 1.27 mm | 0.5 mm | 0.5 mm |
| ## UCC38C42DR Alternates Showing results | — | Image | — | — | — |
| Factory Lead Time | — | — | 8 Weeks | — | — |
| Date Of Intro | — | — | 1998-12-01 | 2018-02-03 | — |
| Has ADC | — | — | YES | — | — |
| Bit Size | — | — | 8 | — | — |
| Boundary Scan | — | — | NO | — | — |
| CPU Family | — | — | PIC16 | — | — |
| Clock Frequency-Max | — | — | 20 MHz | — | — |
| DAC Channels | — | — | NO | — | — |
| DMA Channels | — | — | NO | — | — |
| Format | — | — | FIXED POINT | — | — |
| Integrated Cache | — | — | NO | — | — |
| Low Power Mode | — | — | YES | — | — |
| Number of External Interrupts | — | — | 1 | — | — |
| Number of I/O Lines | — | — | 33 | — | — |
| Number of Timers | — | — | 3 | — | — |
| On Chip Data RAM Width | — | — | 8 | — | — |
| On Chip Program ROM Width | — | — | 14 | — | — |
| PWM Channels | — | — | YES | — | — |
| RAM (bytes) | — | — | 368 | — | — |
| RAM (words) | — | — | 368 | — | — |
| ROM (words) | — | — | 8192 | — | — |
| ROM Programmability | — | — | FLASH | — | — |
| Speed | — | — | 20 MHz | — | — |
| Supply Current-Max | — | — | 15 mA | 340 mA | 0.2 mA |
| Supply Voltage-Max | — | — | 5.5 V | 1.155 V | — |
| Supply Voltage-Min | — | — | 5 V | 1.045 V | — |
| Supply Voltage-Nom | — | — | 5 V | 1.1 V | — |
| uPs/uCs/Peripheral ICs Type | — | — | MICROCONTROLLER, RISC | — | — |
| ## PIC16F877A-I/L Alternates Showing results | — | — | Image | — | — |
| High Level Input Current-Max | — | — | — | 0.000115 A | — |
| Input Characteristics | — | — | — | DIFFERENTIAL SCHMITT TRIGGER | — |
| Interface IC Type | — | — | — | LINE RECEIVER | — |
| Interface Standard | — | — | — | GENERAL PURPOSE | — |
| Out Swing-Min | — | — | — | 0.38 V | — |
| Output Low Current-Max | — | — | — | 0.002 A | — |
| Output Polarity | — | — | — | COMPLEMENTARY | — |
| Receiver Number of Bits | — | — | — | 4 | — |
| Screening Level | — | — | — | AEC-Q100 | — |
| Supply Voltage1-Max | — | — | — | 1.89 V | — |
| Supply Voltage1-Min | — | — | — | 1.71 V | — |
| Supply Voltage1-Nom | — | — | — | 1.8 V | — |
| ## DS90UB960WRTDTQ1 Alternates Showing results | — | — | — | Image | — |
| Amplifier Type | — | — | — | — | OPERATIONAL AMPLIFIER |
| Architecture | — | — | — | — | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | — | — | — | — | 0.003 µA |
| Bias Current-Max (IIB) @25C | — | — | — | — | 0.0002 µA |
| Common-mode Reject Ratio-Min | — | — | — | — | 50 dB |
| Common-mode Reject Ratio-Nom | — | — | — | — | 90 dB |
| Frequency Compensation | — | — | — | — | YES |
| Input Offset Voltage-Max | — | — | — | — | 4000 µV |
| Low-Bias | — | — | — | — | YES |
| Low-Offset | — | — | — | — | NO |
| Micropower | — | — | — | — | YES |
| Packing Method | — | — | — | — | TR |
| Power | — | — | — | — | NO |
| Programmable Power | — | — | — | — | NO |
| Slew Rate-Nom | — | — | — | — | 0.9 V/us |
| Subcategory | — | — | — | — | Operational Amplifier |
| Supply Voltage Limit-Max | — | — | — | — | 5.5 V |
| Supply Voltage-Nom (Vsup) | — | — | — | — | 1.8 V |
| Unity Gain BW-Nom | — | — | — | — | 2200 |
| Voltage Gain-Min | — | — | — | — | 562.34 |
| Wideband | — | — | — | — | NO |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for MBRA130LT3G — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for MBRA130LT3G is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating MBRA130LT3G replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for MBRA130LT3G. Get expert recommendations within 24 hours.
FAQ
What is equivalent to MBRA130LT3G?
Known equivalents for MBRA130LT3G include UCC38C42DR, PIC16F877A-I/L, DS90UB960WRTDTQ1. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of MBRA130LT3G?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify MBRA130LT3G alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.