MAX3232CSE+TCT-ND Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices MAX3232CSE+TCT-ND is a dual-channel RS-232 transceiver with 2 drivers and 2 receivers operating from a 3.0 V to 5.5 V single supply using on-chip charge pump capacitors. Data rates up to 250 kbps are supported with ±15 kV ESD protection on RS-232 I/O pins in a 16-pin SO package. Available from stock worldwide for embedded UART-to-RS232 interface designs.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 16
- Lifecycle
- ACTIVE
- Datasheet
- MAX3232CSE+TCT-ND Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 3.0 V to 5.5 V single-supply operation with internal charge pump generating ±5.4 V RS-232 levels from only four small 0.1 µF external capacitors
- Dual drivers and dual receivers (2T/2R) with data rates up to 250 kbps and ±15 kV ESD protection on all RS-232 interface pins
- 16-pin small-outline SO package with low quiescent current, compatible with MAX232 industry-standard pinout for direct drop-in replacement in 3.3 V or 5 V systems
Applications
The MAX3232CSE+TCT-ND is widely used to add RS-232 serial ports to microcontroller-based systems that operate from a 3.3 V or 5 V supply without a separate RS-232 supply rail. Typical applications include industrial equipment firmware consoles, GPS module interfaces, barcode scanner connections, and point-of-sale terminal communication ports. Its pin compatibility with the classic MAX232 makes it a drop-in upgrade for existing designs being migrated to 3.3 V logic.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for MAX3232CSE+TCT-ND:
Frequently Asked Questions
How does the MAX3232CSE+TCT-ND generate RS-232 voltage levels from a 3.3 V supply without an external DC-DC converter?
The device includes an internal charge pump that uses four external 0.1 µF capacitors to generate ±5.4 V internally, which is then used to drive RS-232 transmitter outputs to the required ±5 V minimum level. This eliminates the need for an external ±12 V supply, simplifying PCB design for 3.3 V systems by requiring only four small capacitors and no additional power components.
What is the maximum data rate for the MAX3232CSE+TCT-ND, and is it sufficient for standard RS-232 applications?
The MAX3232CSE+TCT-ND supports data rates up to 250 kbps, which comfortably exceeds the 115.2 kbps used by most embedded UART applications and satisfies RS-232 standard requirements. For higher-speed serial applications requiring 1 Mbps or more, a dedicated RS-422 or RS-485 transceiver would be a better choice, but for console, GPS, and industrial sensor interfaces 250 kbps is more than adequate.
What ESD protection level does the MAX3232CSE+TCT-ND provide on its RS-232 pins, and why does this matter in industrial designs?
All RS-232 I/O pins are protected to ±15 kV using the Human Body Model (HBM), which is the highest ESD class for this device family. In industrial and field-service environments where cables are frequently plugged and unplugged, this level of protection significantly reduces the risk of transceiver damage from electrostatic discharge during hot-plug events or cable handling.
How many RS-232 channels does the MAX3232CSE+TCT-ND provide, and can it support a full-duplex RS-232 connection with handshake lines?
The device provides 2 independent transmitters and 2 independent receivers in a single 16-pin SO package. This is sufficient for one full-duplex RS-232 port with TX and RX, plus one additional handshake line such as RTS or CTS, enabling complete RS-232 hardware flow control in a compact footprint without needing a second transceiver IC.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”