MAMX-011021-TR1000 MACOM Integrated Circuit (Small Outline No-lead) In Stock
MACOM MAMX-011021-TR1000 is an image-rejection mixer operating from 5000 MHz to 35000 MHz with 50 Ω characteristic impedance and up to 22 dBm CW input power in a compact TDFN-6 package. Suited for high-frequency radar and EW receiver front-ends.
- Manufacturer
- MACOM
- Package
- Small Outline No-lead
- Pin Count
- 7
- Lifecycle
- ACTIVE
- Datasheet
- MAMX-011021-TR1000 Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $11.1900(MOQ 10)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Wideband image-rejection mixer covering 5 GHz to 35 GHz enables multi-band radar, EW, and satellite communication receiver designs in a single component
- Up to 22 dBm CW maximum input power rating allows operation in high-power transmit-receive modules without damage to the mixer
- Maximum conversion loss of 9 dB across the 5–35 GHz band ensures adequate signal-to-noise performance in demanding microwave receiver chains
- 50 Ω characteristic impedance and compact TDFN-6 no-lead package simplify RF layout and minimize parasitic inductance at millimeter-wave frequencies
Applications
The MAMX-011021-TR1000 is designed for image-rejection mixing in high-frequency radar receiver front-ends, electronic warfare (EW) systems, and satellite communication downconverters operating between 5 GHz and 35 GHz. Its wideband coverage and 22 dBm input power tolerance make it well suited for radar warning receivers, signal intelligence (SIGINT) platforms, and point-to-point microwave backhaul transceivers that require low conversion loss over a wide instantaneous bandwidth. The compact TDFN-6 package supports dense microwave module layouts in AESA radar and electronic countermeasure (ECM) hardware.
Specifications
| YTEOL | 7 |
| Characteristic Impedance | 50Ω |
| Construction | COMPONENT |
| Conversion Loss-Max | 9dB |
| Input Power-Max (CW) | 22dBm |
| Operating Frequency-Max | 35000MHz |
| Operating Frequency-Min | 5000MHz |
| RF/Microwave Device Type | IMAGE REJECTION |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for MAMX-011021-TR1000:
Frequently Asked Questions
What frequency range does the MAMX-011021-TR1000 cover and which applications benefit most from this bandwidth?
The MAMX-011021-TR1000 operates from 5000 MHz to 35000 MHz (5 GHz to 35 GHz), spanning S-band through Ka-band in a single image-rejection mixer. This wide bandwidth makes it ideal for multi-band radar systems, electronic warfare receivers, satellite downconverters, and wideband SIGINT platforms that must tune across multiple frequency bands without swapping hardware.
How much CW input power can the MAMX-011021-TR1000 handle before damage, and why does this matter for radar front-ends?
The device accepts up to 22 dBm of continuous-wave (CW) input power, a critical specification for radar and EW receivers that may be exposed to high-power leakage from nearby transmitters or deliberate jamming signals. This 22 dBm rating ensures the mixer survives without a limiter in many T/R module designs, reducing component count and preserving receiver sensitivity at 50 Ω system impedance across the 5–35 GHz band.
What is the maximum conversion loss of MAMX-011021-TR1000 and how does it impact receiver noise figure?
The maximum conversion loss is specified at 9 dB across the 5 GHz to 35 GHz operating range, meaning the mixer attenuates the downconverted signal by at most 9 dB relative to the input. Conversion loss adds directly to receiver noise figure in the Friis equation, so a 9 dB worst-case value must be budgeted carefully in low-noise receiver chains, typically preceded by a low-noise amplifier (LNA) to maintain adequate system sensitivity.
Which package does MAMX-011021-TR1000 use and how does the no-lead TDFN-6 format aid RF PCB layout?
The MAMX-011021-TR1000 uses a TDFN-6 (Thin Dual Flat No-lead, 6-pin) package, which has exposed pads and very short lead lengths that minimize parasitic inductance and capacitance critical at 35 GHz. The no-lead construction allows direct PCB land-pattern attachment with controlled impedance traces at 50 Ω, reducing de-embedding complexity and enabling compact microwave module layouts in AESA radar and ECM assemblies.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About MACOM
MACOM is a leading electronic component manufacturer. FindMyChip sources MACOM ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 10+ | $13.5830 | $135.83 |
| 25+ | $12.7000 | $317.50 |
| 100+ | $11.9187 | $1191.87 |
| 250+ | $11.3400 | $2835.00 |
| 500+ | $11.2300 | $5615.00 |
| 1000+ | $11.1900 | $11190.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”