LTC6992CS6-4#TRMPBF Analog Devices Integrated Circuit (SOT23 (6-Pin)) In Stock

Analog Devices LTC6992CS6-4#TRMPBF is a PWM oscillator controller with 5% to 100% pulse width control and a voltage-controlled oscillator spanning 0.00000318 MHz to 1 MHz. Control voltage range is 0.1V to 0.9V in a surface-mount SOT-23-6 package for compact timing and modulation circuits.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LTC6992CS6-4#TRMPBFSOT23 (6-Pin)
Quick Facts
Manufacturer
Analog Devices
Package
SOT23 (6-Pin)
Pin Count
6
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $2.2700(MOQ 3)
Temp Range
?°C to 70.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Voltage-controlled PWM oscillator spanning 0.00000318 MHz to 1 MHz (sub-Hz to 1 MHz) covering an extremely wide frequency range for timing, dimming, and modulation applications
  • 5% to 100% pulse width control range via 0.1V to 0.9V control voltage, enabling smooth analog duty-cycle modulation without a microcontroller
  • Compact SOT-23-6 surface-mount package enabling PWM generation in minimal board space for LED dimmers, motor speed controllers, and analog modulators

Applications

The LTC6992CS6-4#TRMPBF is designed for analog PWM generation applications where duty cycle must be controlled by a voltage signal rather than a digital processor, such as LED brightness dimming, fan speed control, and DC motor speed regulation. Its voltage-controlled oscillator frequency range from sub-Hz up to 1 MHz allows it to serve both very slow duty-cycle modulation tasks and higher-speed switching applications in a single device. The SOT-23-6 package makes it ideal for space-constrained designs in consumer electronics, industrial controls, and portable equipment where a simple analog-controlled PWM source is needed.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1636
YTEOL8.5
Control Voltage-Max0.9V
Control Voltage-Min0.1V
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Operating Frequency-Max1MHz
Operating Frequency-Min0.00000318MHz
Oscillator TypeVOLTAGE CONTROLLED OSCILLATOR
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSOP6,.11,37
Physical Dimension2.9mm x 1.75mm x 1.0mm
Supply Current-Max0.45mA
Supply Voltage-Max5.5V
Supply Voltage-Min2.25V
Surface MountYES
Terminal FinishMatte Tin (Sn) - annealed
PackageSOT23 (6-Pin)

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.01

Datasheet

LTC6992CS6-4#TRMPBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the PWM frequency range of LTC6992CS6-4#TRMPBF and how is it set?

The LTC6992CS6-4#TRMPBF provides a PWM output frequency range from approximately 0.00000318 MHz (about 3.18 Hz) to 1 MHz. Frequency is set by an external resistor connected to the frequency-setting pin, allowing designers to select any frequency within this 5-decade range to match their switching regulator, LED dimmer, or motor control application requirements.

How does the 0.1V to 0.9V control voltage of LTC6992CS6-4#TRMPBF translate to duty cycle, and what does 5% to 100% range enable?

Applying 0.1V to the control input sets the duty cycle to approximately 5%, while 0.9V sets it to 100%. The 0.8V control span maps linearly to the 95% duty cycle swing, allowing a simple DAC or analog signal (such as a sensor output or potentiometer) to directly modulate the PWM duty cycle from nearly off to fully on without requiring a microcontroller or software.

For an analog LED dimmer circuit, what advantages does LTC6992CS6-4#TRMPBF offer over a microcontroller-based PWM solution?

The LTC6992CS6-4#TRMPBF requires no firmware development, no clock source, and no startup time—it generates PWM immediately when powered. It operates continuously at frequencies up to 1 MHz, above the 20 kHz audible range for silent dimming, while consuming significantly less PCB area in its SOT-23-6 package than any MCU-based solution. This reduces cost, BOM complexity, and design risk for simple single-channel dimming applications.

When should a designer choose LTC6992CS6-4#TRMPBF variant -4 over other LTC6992 variants for their application?

The LTC6992 family includes variants differing in frequency range and polarity. Variant -4 covers the 0.00000318 MHz to 1 MHz range with the specific 5% to 100% duty cycle behavior suited for applications needing a wide sub-Hz to 1 MHz span. Designers choose variant -4 when they need the broadest frequency range including very low frequencies (down to approximately 3 Hz) for slow modulation tasks like thermal control loops, while retaining the ability to reach 1 MHz for switching converter timing.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $2.2700
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
3+$4.4500$13.35
10+$3.8400$38.40
19+$3.0100$57.19
250+$2.6751$668.77
500+$2.4625$1231.25
1000+$2.2700$2270.00
pcs
Unit price: $4.4500 · Total: $13.35

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India