LTC6801IG#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LTC6801IG#PBF is an independent multicell battery stack fault monitor in a 36-pin SSOP, providing adjustable over/under-voltage threshold detection for each cell to protect lithium-ion battery packs in electric vehicles and energy storage systems.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 36
- Lifecycle
- END OF LIFE
- Datasheet
- LTC6801IG#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $13.3600(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Independent multicell fault monitoring for series-connected battery stacks
- Adjustable over-voltage and under-voltage thresholds per cell for flexible protection
- Input fault protection controller architecture isolates faults without system shutdown
- 36-pin SSOP package supporting high cell-count battery stack interfaces
- Compatible with Li-ion and LiFePO4 chemistries in EV and energy storage applications
Applications
The LTC6801IG#PBF is used as a safety monitor in multicell lithium-ion battery packs for electric vehicles, hybrid drives, and grid-scale energy storage where independent per-cell fault detection is critical. Its adjustable voltage thresholds allow system designers to tune over-charge and deep-discharge protection limits precisely for each battery chemistry, complementing a primary BMS controller without interfering with normal operation.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1640 (G36) |
| YTEOL | 0 |
| Adjustable Threshold | YES |
| Analog IC - Other Type | INPUT FAULT PROTECTION CONTROLLER |
| JESD-30 Code | R-PDSO-G36 |
| JESD-609 Code | e3 |
| Number of Channels | 1 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SSOP36,.3 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Current-Max (Isup) | 1.1mA |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 10V |
| Supply Voltage-Nom (Vsup) | 43.2V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Threshold Voltage-Nom | 2.871 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| ## LTC6801IG#PBF Alternates Showing results | Image |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LTC6801IG#PBF:
suggested
Frequently Asked Questions
How does LTC6801IG#PBF independently monitor each cell in a series battery stack?
The LTC6801 connects to each cell tap in a series stack and compares each cell voltage against adjustable over-voltage and under-voltage thresholds, set independently via external resistors. When any cell exceeds its programmed limit, the device asserts a fault output within microseconds, enabling the host BMS to isolate the affected string before damage occurs. This independent per-cell monitoring supports stacks with cells ranging from approximately 2 V to 5 V nominal.
For a 12-cell lithium-ion pack in an EV application, what protection thresholds can LTC6801IG#PBF enforce?
Typical lithium-ion over-voltage limits of 4.2 V and under-voltage limits of 2.7 V per cell can be programmed via external resistor dividers on each threshold input. Across a 12-cell series string with a nominal 43.2 V bus, the device independently guards each cell to prevent over-charge or deep discharge, protecting both cycle life and thermal safety without requiring a microcontroller to run the comparison logic.
How does the 36-pin SSOP package of LTC6801IG#PBF compare in size and pin availability to a QFN alternative for a high-cell-count design?
The 36-pin SSOP body measures approximately 10 mm × 7.5 mm with 0.635 mm pin pitch, providing hand-solderable leads that simplify prototype assembly and rework. A 36-pin QFN would occupy roughly 6×6 mm, about 40% smaller, but requires reflow equipment for reliable attach. For battery management boards in automotive or industrial settings where repairability matters, the SSOP's exposed leads reduce field service time significantly.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $26.7600 | $26.76 |
| 10+ | $19.3680 | $193.68 |
| 1000+ | $13.3600 | $13360.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”