LTC2865HDE#TRPBF Analog Devices Integrated Circuit (Small Outline No-lead) In Stock
LTC2865HDE#TRPBF is a full-duplex RS-485/RS-422 transceiver with selectable 20 Mbps or 250 kbps data rates, ±60 V fault protection, and a separate logic supply, housed in a 12-pin DFN package. It features differential Schmitt trigger receivers and enable controls for robust industrial communication over long cable runs.
- Manufacturer
- Analog Devices
- Package
- Small Outline No-lead
- Pin Count
- 12
- Lifecycle
- ACTIVE
- Datasheet
- LTC2865HDE#TRPBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $2.5250(MOQ 19)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Selectable 20 Mbps or 250 kbps data rate modes
- ±60 V fault-protected RS-485/RS-422 bus pins
- Full-duplex operation with separate TX and RX enables
- Independent logic supply for 3.3 V and 5 V MCU compatibility
- Differential Schmitt trigger receiver for high noise immunity
- Compact 12-pin DFN package with exposed pad
Applications
LTC2865HDE#TRPBF is well suited for industrial field bus networks using RS-485 or RS-422 protocols, where long cable runs of hundreds of meters expose bus lines to high-voltage transients and ground faults. Its ±60 V bus fault protection prevents damage from wiring errors and cable overvoltage events common in factory automation and building control systems. The selectable data rate also allows the same device to serve both high-speed 20 Mbps backplane links and slow 250 kbps sensor bus applications.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1695 |
| YTEOL | 10 |
| Differential Output | YES |
| Driver Number of Bits | 1 |
| High Level Input Current-Max | 0.000005A |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Interface IC Type | LINE TRANSCEIVER |
| Interface Standard | EIA-422; EIA-485 |
| JESD-30 Code | R-PDSO-N12 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Out Swing-Min | 1.5V |
| Output Low Current-Max | 0.003A |
| Output Polarity | COMPLEMENTARY |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC12,.12,20 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Receive Delay-Max | 65ns |
| Receiver Number of Bits | 1 |
| Supply Current-Max | 1.3mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 3.3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Transmit Delay-Max | 1500ns |
| ## LTC2865HDE#TRPBF Alternates Showing results | Image |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LTC2865HDE#TRPBF:
suggested
Frequently Asked Questions
What fault protection level does LTC2865HDE#TRPBF provide on its RS-485 bus pins, and why is that important in industrial installations?
LTC2865HDE#TRPBF provides ±60 V fault protection on its RS-485 bus pins, which covers wiring errors where a 48 V industrial supply or a 24 V field bus line is accidentally connected to the transceiver inputs. This protection level exceeds the standard ±15 V requirement of RS-485, preventing IC damage and reducing replacement costs in harsh factory and building automation environments.
How does the selectable data rate feature of LTC2865HDE#TRPBF help designers support multiple communication protocols on one PCB?
LTC2865HDE#TRPBF supports two data rate modes: 20 Mbps for high-speed backplane or short-link applications, and 250 kbps for long-cable Modbus or PROFIBUS installations at up to several hundred meters. A single pin or jumper selects the mode, allowing one board design to serve both high-speed and slow-sensor variants without stocking separate transceiver SKUs, reducing inventory and simplifying supply chain management.
Can LTC2865HDE#TRPBF interface directly to a 3.3 V microcontroller without level shifters?
Yes, LTC2865HDE#TRPBF includes an independent logic supply pin (VL) that can be set to 3.3 V while the bus supply (VCC) operates at 5 V. This configuration makes the driver and receiver logic pins directly compatible with 3.3 V MCU GPIO without additional level-shifting circuitry, and the 5 µA maximum high-level input current ensures minimal loading on the MCU output pins.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $3.0700 | $58.33 |
| 500+ | $2.5376 | $1268.80 |
| 1000+ | $2.5250 | $2525.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”