LT7101EUHE#PBFAlternatives & Equivalent Parts
About LT7101EUHE#PBF
LT7101EUHE#PBF is a Integrated Circuit component manufactured by Analog Devices. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for LT7101EUHE#PBF — response within 24 hours.
Specification Comparison
| Parameter | LT7101EUHE#PBFSource | DSPIC33EP128GS808-E/PT | IRL640A | OPA1622IDRCR | SMW5R47JT |
|---|---|---|---|---|---|
| Manufacturer | Analog Devices | Microchip | ON Semiconductor | Texas Instruments | TE Connectivity |
| Package Type | Other | Quad Flat Packages | Transistor Outline, Vertical | Small Outline No-lead | Resistor Moulded |
| Pin Count | 26 | 80 | 3 | 11 | 2 |
| Temperature Range | -40.0°C ~ 125.0°C | -40.0°C ~ 125.0°C | ~ 150.0°C | -40.0°C ~ 125.0°C | ~ 280.0°C |
| Price | $5.3500 | $6.0500 | $0.6213 | $1.3950 | $0.4610 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | OBSOLETE | ACTIVE | TRANSFERRED |
| Electrical Parameters | |||||
| Pbfree Code | No | Yes | Yes | Yes | — |
| Manufacturer Package Code | 05-08-1983 | TQFP-80 | 340AT | — | — |
| YTEOL | 9 | 19 | 0 | 15 | — |
| Analog IC - Other Type | SWITCHING REGULATOR | — | — | — | — |
| Control Mode | CURRENT-MODE | — | — | — | — |
| Control Technique | PULSE WIDTH MODULATION | — | — | — | — |
| Input Voltage-Max | 105 V | — | — | — | — |
| Input Voltage-Min | 4.4 V | — | — | — | — |
| Input Voltage-Nom | 12 V | — | — | — | — |
| JESD-30 Code | R-PQCC-N36 | S-PQFP-G80 | R-PSFM-T3 | S-PDSO-N10 | — |
| JESD-609 Code | e3 | e3 | e3 | e4 | e3 |
| Number of Functions | 1 | — | — | 2 | — |
| Output Current-Max | 1.85 A | — | — | — | — |
| Output Voltage-Max | 105 V | — | — | — | — |
| Output Voltage-Min | 1 V | — | — | — | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | — |
| Package Shape | RECTANGULAR | SQUARE | RECTANGULAR | SQUARE | RECTANGULAR PACKAGE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | FLATPACK, THIN PROFILE | FLANGE MOUNT | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | — |
| Surface Mount | YES | YES | NO | YES | YES |
| Switcher Configuration | BUCK | — | — | — | — |
| Switching Frequency-Max | 2000 kHz | — | — | — | — |
| Technology | BIPOLAR | CMOS | — | BICMOS | WIRE WOUND |
| Temperature Grade | AUTOMOTIVE | AUTOMOTIVE | — | AUTOMOTIVE | — |
| Terminal Finish | Matte Tin (Sn) | Matte Tin (Sn) | MATTE TIN | Nickel/Palladium/Gold (Ni/Pd/Au) | TIN |
| Terminal Form | NO LEAD | GULL WING | THROUGH-HOLE | NO LEAD | — |
| Terminal Pitch | 0.5 mm | 0.5 mm | — | 0.5 mm | — |
| Terminal Position | QUAD | QUAD | SINGLE | DUAL | — |
| ## LT7101EUHE#PBF Alternates Showing results | Image | — | — | — | — |
| Factory Lead Time | — | 6 Weeks | 4 Weeks | — | 23 Weeks, 4 Days |
| Has ADC | — | YES | — | — | — |
| Barrel Shifter | — | YES | — | — | — |
| Bit Size | — | 16 | — | — | — |
| Boundary Scan | — | YES | — | — | — |
| Clock Frequency-Max | — | 60 MHz | — | — | — |
| DAC Channels | — | YES | — | — | — |
| DMA Channels | — | YES | — | — | — |
| Format | — | FIXED POINT | — | — | — |
| Integrated Cache | — | NO | — | — | — |
| Internal Bus Architecture | — | MULTIPLE | — | — | — |
| Low Power Mode | — | YES | — | — | — |
| Number of DMA Channels | — | 4 | — | — | — |
| Number of External Interrupts | — | 4 | — | — | — |
| Number of I/O Lines | — | 67 | — | — | — |
| Number of Serial I/Os | — | 4 | — | — | — |
| Number of Timers | — | 7 | — | — | — |
| On Chip Data RAM Width | — | 8 | — | — | — |
| On Chip Program ROM Width | — | 24 | — | — | — |
| PWM Channels | — | YES | — | — | — |
| Package Equivalence Code | — | TQFP80,.55SQ | — | — | — |
| RAM (bytes) | — | 8192 | — | — | — |
| RAM (words) | — | 8192 | — | — | — |
| ROM (words) | — | 131072 | — | — | — |
| ROM Programmability | — | FLASH | — | — | — |
| Screening Level | — | AEC-Q100; TS 16949 | — | — | — |
| Supply Current-Max | — | 75 mA | — | 6 mA | — |
| Supply Voltage-Max | — | 3.6 V | — | — | — |
| Supply Voltage-Min | — | 3 V | — | — | — |
| Supply Voltage-Nom | — | 3.3 V | — | — | — |
| uPs/uCs/Peripheral ICs Type | — | DIGITAL SIGNAL PROCESSOR, CONTROLLER | — | — | — |
| ## DSPIC33EP128GS808-E/PT Alternates Showing results | — | Image | — | — | — |
| Additional Feature | — | — | LOGIC LEVEL COMPATIBLE | — | — |
| Avalanche Energy Rating (Eas) | — | — | 64 mJ | — | — |
| Configuration | — | — | SINGLE WITH BUILT-IN DIODE | — | — |
| DS Breakdown Voltage-Min | — | — | 200 V | — | — |
| Drain Current-Max (ID) | — | — | 18 A | — | — |
| Drain-source On Resistance-Max | — | — | 0.18 Ω | — | — |
| FET Technology | — | — | METAL-OXIDE SEMICONDUCTOR | — | — |
| JEDEC-95 Code | — | — | TO-220AB | — | — |
| Number of Elements | — | — | 1 | — | — |
| Operating Mode | — | — | ENHANCEMENT MODE | — | — |
| Polarity/Channel Type | — | — | N-CHANNEL | — | — |
| Power Dissipation-Max (Abs) | — | — | 110 W | — | — |
| Pulsed Drain Current-Max (IDM) | — | — | 63 A | — | — |
| Qualification Status | — | — | Not Qualified | — | — |
| Transistor Application | — | — | SWITCHING | — | — |
| Transistor Element Material | — | — | SILICON | — | — |
| Amplifier Type | — | — | — | OPERATIONAL AMPLIFIER | — |
| Architecture | — | — | — | VOLTAGE-FEEDBACK | — |
| Average Bias Current-Max (IIB) | — | — | — | 2.2 µA | — |
| Bias Current-Max (IIB) @25C | — | — | — | 2 µA | — |
| Common-mode Reject Ratio-Min | — | — | — | 110 dB | — |
| Common-mode Reject Ratio-Nom | — | — | — | 127 dB | — |
| Frequency Compensation | — | — | — | YES | — |
| Input Offset Current-Max (IIO) | — | — | — | 0.08 µA | — |
| Input Offset Voltage-Max | — | — | — | 500 µV | — |
| Low-Bias | — | — | — | NO | — |
| Low-Offset | — | — | — | YES | — |
| Micropower | — | — | — | NO | — |
| Neg Supply Voltage Limit-Max | — | — | — | -20 V | — |
| Neg Supply Voltage-Nom (Vsup) | — | — | — | -5 V | — |
| Packing Method | — | — | — | TR | TR |
| Peak Reflow Temperature (Cel) | — | — | — | 260 | — |
| Power | — | — | — | NO | — |
| Programmable Power | — | — | — | NO | — |
| Slew Rate-Nom | — | — | — | 10 V/us | — |
| Supply Voltage Limit-Max | — | — | — | 20 V | — |
| Supply Voltage-Nom (Vsup) | — | — | — | 5 V | — |
| Time@Peak Reflow Temperature-Max (s) | — | — | — | 30 | — |
| Unity Gain BW-Nom | — | — | — | 32000 | — |
| Voltage Gain-Min | — | — | — | 1000000 | — |
| Wideband | — | — | — | NO | — |
| ## OPA1622IDRCR Alternates Showing results | — | — | — | Image | — |
| Reach Compliance Code | — | — | — | — | Compliant |
| Mounting Feature | — | — | — | — | SURFACE MOUNT |
| Rated Power Dissipation (P) | — | — | — | — | 5 W |
| Rated Temperature | — | — | — | — | 25 °C |
| Resistance | — | — | — | — | 0.47 Ω |
| Resistor Type | — | — | — | — | FIXED RESISTOR |
| Size Code | — | — | — | — | 5329 |
| Temperature Coefficient | — | — | — | — | 200 ppm/°C |
| Terminal Shape | — | — | — | — | WRAPAROUND |
| Tolerance | — | — | — | — | 5% |
| Working Voltage | — | — | — | — | 500 V |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for LT7101EUHE#PBF — response within 24 hours.
Quick Links
suggested
suggested
Why Look for Alternatives?
Finding alternatives for LT7101EUHE#PBF is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating LT7101EUHE#PBF replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for LT7101EUHE#PBF. Get expert recommendations within 24 hours.
FAQ
What is equivalent to LT7101EUHE#PBF?
Known equivalents for LT7101EUHE#PBF include DSPIC33EP128GS808-E/PT, IRL640A, OPA1622IDRCR. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of LT7101EUHE#PBF?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify LT7101EUHE#PBF alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.