LT6300IGN#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
The LT6300IGN#PBF is a dual high-speed operational amplifier and DSL line driver capable of sourcing 500 mA output current per channel. It features differential inputs and operates in a 16-pin SSOP package suited for demanding line-drive applications. Available from stock with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 16
- Lifecycle
- NOT RECOMMENDED
- Datasheet
- LT6300IGN#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $5.5300(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual 500 mA output current drive per channel enables robust DSL line driving
- Differential input architecture reduces common-mode noise in high-speed signal paths
- 16-pin SSOP package integrates two amplifier channels for compact board layouts
- High-speed bandwidth supports DSL and general-purpose line-driver applications up to MHz frequencies
Applications
The LT6300IGN#PBF serves as a dual high-speed line driver in xDSL modem front-ends and ADSL subscriber-side equipment requiring high output current. It is also used in active termination networks and differential signal conditioning circuits where 500 mA drive capability eliminates external buffer stages. Its dual-channel design in a 16-pin SSOP reduces component count in space-constrained communication line cards.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1641 (GN16) |
| YTEOL | 3 |
| Differential Output | NO |
| Driver Number of Bits | 2 |
| Input Characteristics | DIFFERENTIAL |
| Interface IC Type | LINE DRIVER |
| Interface Standard | GENERAL PURPOSE |
| JESD-30 Code | R-PDSO-G16 |
| JESD-609 Code | e3 |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SSOP16,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max | 12V |
| Supply Voltage-Min | 5V |
| Supply Voltage-Nom | 10V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What output current can each channel of LT6300IGN#PBF deliver to a DSL line?
Each channel of the LT6300IGN#PBF can deliver up to 500 mA of continuous output current, making it well-suited for driving low-impedance DSL transmission lines. This high drive capability allows the device to maintain signal integrity across 100-ohm twisted-pair lines without external power amplifier stages in typical xDSL modem designs.
Which xDSL standards is LT6300IGN#PBF designed to support?
The LT6300IGN#PBF is specifically designed for ADSL and VDSL line-driver applications, supporting signal bandwidths up to several MHz. Its 500 mA drive per channel and differential input architecture meet the signal fidelity requirements of ADSL downstream rates up to 8 Mbps and VDSL downstream rates exceeding 50 Mbps in short loop deployments.
How does the 16-pin SSOP package of LT6300IGN#PBF simplify DSL modem PCB layout?
The 16-pin SSOP package integrates both amplifier channels with a pin pitch of 0.635 mm, reducing the PCB footprint compared to using two discrete SO-8 amplifiers. This compact integration shrinks the line driver section of a DSL modem card by approximately 40%, freeing board space for transformer and filter components critical to DSL front-end design.
Can LT6300IGN#PBF replace LT1795 in an existing ADSL line driver circuit?
The LT6300IGN#PBF is a dual-channel device delivering 500 mA per channel, while the LT1795 is a single-channel device. As a drop-in replacement, the LT6300 can consolidate two LT1795 amplifiers onto one IC, halving the device count in the line-driver section. Verify supply voltage compatibility, typically 5 V to 12 V single or ±5 V, before substitution.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $7.4400 | $7.44 |
| 1000+ | $5.5300 | $5530.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”