LT3080IQ#PBF Analog Devices Integrated Circuit (Other) In Stock
The LT3080IQ#PBF is a single-resistor adjustable LDO linear regulator delivering up to 1.1A output current with a 0.35V typical dropout voltage and 0.0036% load regulation. It features a 5-pin DDPAK package with an exposed die paddle for thermal management. From $5.80 in stock with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Other
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- LT3080IQ#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $3.5100(MOQ 19)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Single external resistor output voltage adjustment from 0V to maximum VIN simplifies design and supports paralleling multiple devices for increased output current
- Ultra-low 0.35V typical dropout voltage at 1.1A enables efficient regulation from low-headroom supplies including 3.3V to 2.5V or 5V to 3.3V conversions
- Exceptional 0.0036% load regulation and low output noise make it ideal for precision analog, RF, and sensor power supply applications
Applications
The LT3080IQ#PBF is designed for precision analog and RF subsystem power supplies requiring low noise, low dropout, and accurate voltage adjustment using a single resistor. Its ability to parallel multiple devices makes it well-suited for high-current point-of-load applications on multi-layer PCBs where space is distributed across a board. The 5-pin DDPAK package with exposed paddle provides adequate thermal dissipation for continuous 1.1A loads in industrial and telecom equipment operating from -40°C to 125°C.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1461 |
| YTEOL | 10 |
| Adjustability | ADJUSTABLE |
| Dropout Voltage1-Max | 0.5V |
| Dropout Voltage1-Nom | 0.35V |
| JESD-30 Code | R-PSSO-G5 |
| JESD-609 Code | e3 |
| Load Regulation-Max(%) | 0.0036% |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Operating Temperature TJ-Max | 125°C |
| Operating Temperature TJ-Min | -40 °C |
| Output Current1-Max | 1.1A |
| Output Voltage1-Max | 36V |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Regulator Type | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.702mm |
| Terminal Position | SINGLE |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does setting output voltage with a single resistor work on the LT3080IQ#PBF?
The LT3080IQ#PBF uses a 10 µA reference current output (ISET pin) that flows through a single external resistor to ground, setting the output voltage as VOUT = ISET × R. For example, a 330 kΩ resistor sets VOUT to approximately 3.3 V. This eliminates the resistor divider required by traditional LDOs, reduces component count by 1 part, and makes paralleling multiple LT3080 devices straightforward for higher output current.
What is the minimum dropout voltage of the LT3080IQ#PBF and how does it compare to standard LDOs?
The LT3080IQ#PBF achieves a typical dropout voltage of 0.35 V and a maximum of 0.5 V at 1.1 A output current. This is approximately 2-3× lower than conventional PNP-based LDOs rated at 1A, enabling 3.3 V regulation from a 3.7 V lithium-ion cell or 2.5 V regulation from a 3.0 V supply. The low dropout extends battery runtime in portable instruments and reduces power dissipation in space-constrained industrial applications.
Can multiple LT3080IQ#PBF devices be paralleled for higher output current, and how?
Yes, the LT3080IQ#PBF is specifically designed for paralleling. Connecting the SET pins together through equal resistors and tying OUTPUT pins together allows n devices to share load current nearly equally, achieving n × 1.1 A total output. Two devices in parallel provide 2.2 A, and three provide 3.3 A. Each device contributes to thermal spreading across the PCB, reducing hotspot temperature compared to a single high-current LDO in space-constrained 12 V industrial or telecom power stages.
Which noise-sensitive designs benefit most from the LT3080IQ#PBF over a switching regulator?
The LT3080IQ#PBF's low output noise (typically 40 µV RMS, 10 Hz to 100 kHz) and 0.0036% load regulation make it the preferred post-regulator for RF PLL VCO supplies, precision ADC reference rails, and sensitive sensor bias circuits where switching regulator ripple above 1 mV would degrade signal quality. Adding a 10 µF output capacitor and an optional 100 pF noise bypass on the SET pin reduces noise further for sub-µV sensitive analog frontends.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $4.6500 | $88.35 |
| 250+ | $3.8789 | $969.72 |
| 500+ | $3.8125 | $1906.25 |
| 1000+ | $3.5100 | $3510.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”