LT3033IUDC#PBF Analog Devices Integrated Circuit (Other) In Stock
LT3033IUDC#PBF is an adjustable 3 A low-dropout linear regulator from Analog Devices with only 95 mV typical dropout voltage and up to 9.8 V input-output differential, housed in a 20-pin QFN package.
- Manufacturer
- Analog Devices
- Package
- Other
- Pin Count
- 20
- Lifecycle
- ACTIVE
- Datasheet
- LT3033IUDC#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $4.4200(MOQ 1)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Ultra-low 95 mV typical dropout voltage at 3 A output enables efficient regulation from near-rail input supplies
- Adjustable output voltage with 3 A continuous current for powering FPGAs, processors, and analog circuits
- Wide input-output differential up to 9.8 V covers a broad range of input supply voltages
- Compact 20-pin QFN (3 mm × 4 mm) package integrates protection features for high-density power designs
Applications
The LT3033IUDC#PBF is designed for post-regulation after switching converters in FPGA, DSP, and ASIC power trees where the 95 mV dropout voltage minimises power dissipation while delivering a clean 3 A regulated output. Its adjustable output is also valuable in RF and mixed-signal subsystems that require low-noise linear supply rails with fast transient response. Industrial instruments and test equipment benefit from the device's combination of high current capacity and very low dropout in a compact 20-pin QFN footprint.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1536 |
| Date Of Intro | 2018-08-14 |
| YTEOL | 10 |
| Adjustability | ADJUSTABLE |
| Dropout Voltage1-Max | 0.24V |
| Dropout Voltage1-Nom | 0.095V |
| Input-Output Voltage Differential-Max | 9.8V |
| Input-Output Voltage Differential-Min | 0.94V |
| JESD-30 Code | R-PQCC-N20 |
| JESD-609 Code | e3 |
| Line Regulation-Max (%/V) | 0.07054 |
| Load Regulation-Max(%) | 1% |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Operating Temperature TJ-Max | 125°C |
| Operating Temperature TJ-Min | -40 °C |
| Output Current1-Max | 3A |
| Output Voltage1-Max | 9.7V |
| Output Voltage1-Min | 0.2V |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | LCC20,.12X.16,20 |
| Package Shape | RECTANGULAR |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Regulator Type | ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LT3033IUDC#PBF:
suggested
Frequently Asked Questions
How low is the dropout voltage of LT3033IUDC#PBF and why is that important in FPGA power designs?
The LT3033IUDC#PBF has a typical dropout voltage of only 95 mV at 3 A output, meaning it can regulate correctly with an input just 95 mV above the output rail. In FPGA power trees where a 1.8 V core rail is derived from a 2 V switcher output, this ultra-low dropout minimises thermal dissipation and improves efficiency.
What output current does LT3033IUDC#PBF support for powering multiple digital loads simultaneously?
LT3033IUDC#PBF provides up to 3 A continuous output current, sufficient to power a mid-range FPGA core, a DDR memory controller, or multiple high-speed digital ICs from a single linear post-regulator. The adjustable output covers the common 0.8 V to 5 V range used by modern processors.
When is LT3033IUDC#PBF preferred over a buck converter for noise-sensitive analog or RF circuits?
Linear regulators like the LT3033IUDC#PBF produce no switching noise, making them the preferred choice for RF VCO supply rails, ADC reference supplies, and precision analog circuits where a buck converter's 300 kHz to 3 MHz ripple would degrade SNR or phase noise. The 3 A capacity handles most analog subsystem loads without an additional switcher.
What is the maximum allowable input-output voltage differential for LT3033IUDC#PBF in a 12 V to 3.3 V regulation scenario?
The LT3033IUDC#PBF supports a maximum input-output differential of 9.8 V, so it can be directly connected between a 12 V rail and a 3.3 V output rail without violating device limits. For a 12 V input and 3.3 V output, the differential is 8.7 V, which falls comfortably within the 9.8 V maximum, though thermal management of the 26 W dissipation at full 3 A load is critical.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $8.0700 | $8.07 |
| 2+ | $5.3800 | $10.76 |
| 1000+ | $4.4200 | $4420.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”