LT3015EDD-5#PBF Analog Devices Integrated Circuit (Small Outline No-lead) In Stock

LT3015EDD-5#PBF is a fixed -5 V output negative linear LDO regulator from Analog Devices, delivering 1.5 A with only 0.31 V typical dropout voltage and a precision current limit. It accepts input voltages from -5.5 V to -30 V and comes in an 8-lead DFN package. Available in stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LT3015EDD-5#PBFSmall Outline No-lead
Quick Facts
Manufacturer
Analog Devices
Package
Small Outline No-lead
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $3.6900(MOQ 10)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Fixed -5 V negative output LDO providing 1.5 A with 0.31 V typical dropout, enabling efficient negative rail regulation down to 5.81 V input
  • Precision internal current limit protects the load and downstream circuitry from fault conditions without external sense resistors
  • 8-lead DFN (S-PDSO-N8) package with low-noise design suits analog signal chains requiring a clean negative supply rail

Applications

LT3015EDD-5#PBF is ideal for powering operational amplifiers, instrumentation amplifiers, and analog front ends that require a stable negative -5 V rail from a higher negative input supply. Its 1.5 A current capability and low 0.31 V dropout make it suitable for precision data acquisition systems, audio equipment, and industrial sensor conditioning circuits. The precision current limit feature also makes it a robust choice for protecting sensitive analog circuitry in test-and-measurement equipment.

Specifications

Pbfree CodeNo
Manufacturer Package Code05-08-1698
YTEOL8.5
AdjustabilityFIXED
Dropout Voltage1-Max0.5V
Dropout Voltage1-Nom0.31V
Input Voltage-Max30V
Input Voltage-Min5.5V
JESD-30 CodeS-PDSO-N8
JESD-609 Codee3
Load Regulation-Max0.026%
Number of Functions1
Number of Outputs1
Operating Temperature TJ-Max125°C
Output Current1-Max1.5A
Output Voltage1-Max5.1V
Output Voltage1-Min4.9V
Output Voltage1-Nom5V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeSOLCC8,.11,20
Package ShapeSQUARE
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Regulator TypeFIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR
Surface MountYES
TechnologyBIPOLAR
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.5mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
Voltage Tolerance-Max2%
PackageSmall Outline No-lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Datasheet

LT3015EDD-5#PBF Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What output voltage and current does LT3015EDD-5#PBF provide, and what is its dropout voltage?

LT3015EDD-5#PBF delivers a fixed -5 V output at up to 1.5 A with a typical dropout voltage of 0.31 V and a maximum of 0.5 V. This means the device can regulate -5 V with an input as low as -5.5 V. The combination of high current and low dropout makes it efficient for powering op-amp negative rails and precision analog circuits.

What input voltage range does LT3015EDD-5#PBF support, and how does it handle transient overloads?

LT3015EDD-5#PBF accepts input voltages from -5.5 V to -30 V, giving designers wide headroom for unregulated negative supplies. The internal precision current limit activates automatically during overloads and short-circuit events, clamping output current to the programmed limit without requiring external sense resistors. This protects both the regulator and downstream analog components without adding board complexity.

Which board-level applications benefit from using LT3015EDD-5#PBF as a negative supply post-regulator?

Instrumentation amplifiers, ADC/DAC bias rails, and precision op-amp circuits operating on split ±5 V supplies benefit most from LT3015EDD-5#PBF as a post-regulator. At 1.5 A capacity with 0.31 V dropout and a low-noise design, it cleans switching-converter ripple on the negative rail below the noise floor of 16-bit and 24-bit converters. Industrial sensor conditioning boards, audio DACs, and medical signal front ends are typical deployment environments.

How compact is the LT3015EDD-5#PBF package, and does it require an external heatsink at full load?

LT3015EDD-5#PBF occupies an 8-lead DFN (S-PDSO-N8) footprint measuring approximately 3 mm x 3 mm. At full 1.5 A load with a 10 V input-output differential, the device dissipates up to 15 W; the exposed pad transfers heat to the PCB copper pour, which typically suffices for dissipation up to 1 W to 2 W without an external heatsink. For higher dissipation, a 2-oz copper ground plane or external heatsink pad is recommended.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $3.6900
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
10+$6.1160$61.16
19+$4.8900$92.91
50+$3.7900$189.50
1000+$3.6900$3690.00
pcs
Unit price: $6.1160 · Total: $61.16

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India