LT1787IMS8#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
The LT1787IMS8#PBF is a precision bidirectional/unidirectional current sensing amplifier from Analog Devices (Linear Technology) in an 8-pin MSOP package, designed for accurate high-side current measurement. Available from stock with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT1787IMS8#PBF Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Single-channel bidirectional and unidirectional current sense amplifier enabling flexible shunt monitoring in both directions on a single 8-pin MSOP
- Precision high-side current measurement with low input offset for accurate power monitoring across supply rails from 2.7 V to 60 V
- Compact 8-pin MSOP package from Analog Devices Linear Technology product line offering proven reliability in industrial and telecom designs
Applications
The LT1787IMS8#PBF is suited for high-side current monitoring in power management circuits, battery chargers, and telecom power systems where both source and sink current measurement is required. Its bidirectional capability makes it valuable in motor drive applications and supercapacitor management systems that need to track charge and discharge currents through a shunt resistor. The 8-pin MSOP package fits compactly on power supply boards alongside MOSFET drivers and feedback control loops.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1660 |
| YTEOL | 10 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| JESD-30 Code | S-PDSO-G8 |
| JESD-609 Code | e3 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What makes the LT1787IMS8#PBF suitable for bidirectional current sensing in a battery management system?
The LT1787IMS8#PBF supports both bidirectional and unidirectional shunt current sensing, allowing a single 8-pin MSOP IC to monitor charge current flowing into a battery pack and discharge current flowing out, covering a typical sense voltage range of ±50 mV across a shunt resistor at supply voltages up to 60 V.
Over what supply voltage range can the LT1787IMS8#PBF perform high-side current monitoring?
The LT1787IMS8#PBF operates on supply rails from 2.7 V to 60 V, making it suitable for high-side current sensing in 5 V logic supplies, 12 V automotive systems, 24 V industrial rails, and 48 V telecom equipment without requiring additional level-shifting circuitry.
How does the LT1787IMS8#PBF MSOP-8 package benefit space-constrained power supply board designs?
The 8-pin thin-profile MSOP package of the LT1787IMS8#PBF measures approximately 3 mm x 3 mm, fitting within a compact footprint alongside shunt resistors and decoupling capacitors, enabling current sensing sub-circuits to be integrated into dense power supply modules or battery charger boards where DIP or SOIC packages would be too large.
When would a designer choose the LT1787IMS8#PBF over a digital current sense amplifier with I2C output?
The LT1787IMS8#PBF is preferred when the host MCU already includes an ADC channel and a simple analog output proportional to sensed current is sufficient, avoiding the added latency and complexity of an I2C-based current monitor while achieving accurate current measurement with a bandwidth suitable for control loops operating at frequencies below 100 kHz.
Related Guides
DP83848 10/100 Mbps Ethernet PHY Transceiver: How to Choose the Right Variant
A complete selection guide for the DP83848 family: compare temperature grades, packages, JTAG support, and interface options across all five variants.
Jun 2, 2026
LM5156 Wide-VIN Boost/SEPIC/Flyback Controller: How to Choose the Right Variant
A concise selection guide for the LM5156 and LM51561 family: how to choose between automotive vs industrial grade, spread-spectrum vs fixed-frequency, and WSON-8 vs HTSSOP-14 package.
Jun 2, 2026
24LC01B I2C EEPROM Design Guide: Pinout, Write Timing, and Package Selection
Complete application note for the Microchip 24LC01B 1 Kbit I2C EEPROM: address wiring, pull-up sizing, acknowledge polling, page-write alignment, and package selection.
Jun 1, 2026
AD8531ARTZ-REEL7 Application Note: High-Current Op-Amp Design Guide
A complete design guide for the AD8531ARTZ-REEL7 250 mA rail-to-rail op-amp: decoupling, thermal budgeting, capacitive load stability, and PCB layout best practices.
Jun 1, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”