LT1636CMS8#TRPBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock

Name: LT1636CMS8#TRPBF
Brand: Analog Devices
SKU: LT1636CMS8#TRPBF
Availability: InStock

LT1636CMS8#TRPBF is an over-the-top precision rail-to-rail input and output op-amp from Analog Devices with 103 dB typical CMRR and 850 µV maximum input offset voltage. It operates across a wide common-mode range beyond the positive supply rail in an 8-pin MSOP package. In stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026

Package / Visual Reference

LT1636CMS8#TRPBFSmall Outline Packages

Quick Facts

Manufacturer: Analog Devices
Package: Small Outline Packages
Pin Count: 8
Lifecycle: ACTIVE
Datasheet: LT1636CMS8#TRPBF Datasheet PDF
Category: Integrated Circuit
Price: From $3.1100(MOQ 19)
Temp Range: ?°C to 70.0°C
RoHS: Compliant
Lead Time: 3–7 business days
Shipping: DHL Express · Worldwide

What are the key features of LT1636CMS8#TRPBF?

Over-the-top input operation allowing common-mode voltages to exceed the positive supply rail by up to 44 V for high-side current sensing
Rail-to-rail input and output (R2R) swing enabling signal processing close to both supply rails in single or dual supply configurations
103 dB typical common-mode rejection ratio (CMRR) with 86 dB minimum, ensuring high precision in noisy industrial environments
Micropower quiescent current of only 45 µA enabling battery-powered and energy-harvesting sensor designs with minimal self-discharge

What is LT1636CMS8#TRPBF used for?

The LT1636CMS8#TRPBF is ideal for high-side current sensing in battery management systems where the common-mode voltage exceeds the op-amp supply rail by tens of volts. Its rail-to-rail output and precision 103 dB CMRR make it suitable for precision instrumentation amplifiers, industrial 4–20 mA current loop interfaces, and data acquisition front-ends. The low-quiescent-current design also fits portable medical monitors and remote sensor nodes where power budget is tight.

What are the specifications of LT1636CMS8#TRPBF?

Pbfree Code	No
Manufacturer Package Code	05-08-1660
YTEOL	9
Amplifier Type	OPERATIONAL AMPLIFIER
Architecture	VOLTAGE-FEEDBACK
Average Bias Current-Max (IIB)	0.01 µ A
Common-mode Reject Ratio-Min	86dB
Common-mode Reject Ratio-Nom	103dB
Frequency Compensation	YES
Input Offset Voltage-Max	850 µ V
JESD-30 Code	S-PDSO-G8
JESD-609 Code	e3
Low-Bias	YES
Low-Offset	YES
Micropower	NO
Neg Supply Voltage Limit-Max	-22 V
Neg Supply Voltage-Nom (Vsup)	-15 V
Number of Functions	1
Package Body Material	PLASTIC/EPOXY
Package Equivalence Code	TSSOP8,.19
Package Shape	SQUARE
Package Style	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Packing Method	TR
Peak Reflow Temperature (Cel)	260
Power	NO
Programmable Power	NO
Qualification Status	Not Qualified
Slew Rate-Min	0.0375V/us
Slew Rate-Nom	0.075V/us
Supply Current-Max	0.055mA
Supply Voltage Limit-Max	22V
Supply Voltage-Nom (Vsup)	15V
Surface Mount	YES
Technology	BIPOLAR
Temperature Grade	COMMERCIAL
Terminal Finish	Matte Tin (Sn)
Terminal Form	GULL WING
Terminal Pitch	0.65mm
Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30
Unity Gain BW-Nom	220
Voltage Gain-Min	100000
Wideband	YES
Package	Small Outline Packages

Compliance & Regulatory

RoHS Status	Compliant
Lead-Free	Yes (Pb-Free)
Moisture Sensitivity Level	MSL 1
ECCN	EAR99
HTS Code	8542.33.00.01
Country of Origin	Malaysia

Where can I find the LT1636CMS8#TRPBF datasheet?

LT1636CMS8#TRPBF Datasheet Download

Official datasheet from Analog Devices

What are equivalent replacements for LT1636CMS8#TRPBF?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How far above the positive supply rail can the LT1636CMS8#TRPBF common-mode input voltage extend?

The LT1636CMS8#TRPBF supports an over-the-top common-mode input voltage that can exceed the positive supply by up to 44 V, with supply voltages ranging from 2.7 V to 44 V single supply. This makes it suitable for high-side current sensing on 12 V, 24 V, and 48 V industrial power rails without level-shifting circuitry.

What is the CMRR specification of the LT1636CMS8#TRPBF, and why does it matter in a current-sense design?

The LT1636CMS8#TRPBF achieves a typical CMRR of 103 dB with a minimum of 86 dB. In a current-sense application riding on a 48 V bus, 103 dB CMRR limits the common-mode error to under 50 µV referred to input, preserving measurement accuracy even in noisy switch-mode power converter environments.

Which sensor interface designs benefit most from the LT1636CMS8#TRPBF rail-to-rail output?

Designs using 3.3 V or 5 V single-supply ADCs benefit most, since the rail-to-rail output allows the amplified signal to swing within millivolts of both rails, maximizing the ADC input range and effective resolution. For a 12-bit ADC on a 3.3 V supply, this can recover roughly 2 additional bits of dynamic range compared to an op-amp with 300 mV output headroom loss.

How does the LT1636CMS8#TRPBF quiescent current compare to general-purpose op-amps for battery-powered sensing?

The LT1636CMS8#TRPBF draws only 45 µA quiescent current per amplifier, compared to 1–5 mA for many general-purpose op-amps. In a coin-cell powered sensor node running on a 220 mAh CR2032 battery, this difference extends autonomous operation from under 50 hours to over 4800 hours under always-on measurement conditions.

Why Buy from FindMyChip

Authorized Source

Verified supply chain with full traceability & inspection

Competitive Pricing

Factory-direct from China distributors, low MOQ

Fast Shipping

DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide

Quality Guaranteed

30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

View all Analog Devices parts →

More from Analog Devices

LT3062EDCB#TRPBF

Small Outline No-lead

Integrated Circuit

LT3062EDCB#TRMPBF

Small Outline No-lead

Integrated Circuit

LT8641IUDC#TRPBF

Other

Integrated Circuit

HMC412AMS8GTR

Small Outline Packages

Integrated Circuit

LT3062HMS8E#PBF

Small Outline Packages

Integrated Circuit

LT3062IMS8E#PBF

Small Outline Packages

Integrated Circuit

AvailabilityIn Stock

Reference Price (USD)

From $3.1100

Buy from 1pc · Factory-direct pricing

Qty.	Unit Price	Ext. Price
19+	$4.1200	$78.28
500+	$3.3750	$1687.50
1000+	$3.1100	$3110.00

pcs

Unit price: $4.1200 · Total: $78.28

In Stock · 24h Response · Worldwide Shipping

Direct Contact

WhatsApp Inquiry Email RFQ

Lead Time3-7 business days

MOQFrom 1 piece

ShippingDHL / FedEx / UPS

OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”

Rajesh Patel

Procurement Manager, VoltEdge Energy, India

LT1636CMS8#TRPBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock

What are the key features of LT1636CMS8#TRPBF?

What is LT1636CMS8#TRPBF used for?

What are the specifications of LT1636CMS8#TRPBF?

Compliance & Regulatory

Where can I find the LT1636CMS8#TRPBF datasheet?

What are equivalent replacements for LT1636CMS8#TRPBF?

Frequently Asked Questions

How far above the positive supply rail can the LT1636CMS8#TRPBF common-mode input voltage extend?

What is the CMRR specification of the LT1636CMS8#TRPBF, and why does it matter in a current-sense design?

Which sensor interface designs benefit most from the LT1636CMS8#TRPBF rail-to-rail output?

How does the LT1636CMS8#TRPBF quiescent current compare to general-purpose op-amps for battery-powered sensing?

Related Guides

TLV76033 Selection Guide: Headroom, Heat, and Sourcing

DP83TG720SWRHATQ1 Automotive Ethernet Board Design Guide

BQ76942PFBR Battery Monitor Selection and Procurement Guide

SEP0640Q38CB Surge Protection Board Validation Guide

Why Buy from FindMyChip

About Analog Devices

More from Analog Devices

You May Also Like