LT1494IMS8#PBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LT1494IMS8#PBF is a micropower rail-to-rail input/output operational amplifier with 3 kHz gain-bandwidth product, 96 dB minimum CMRR, 1 nA input bias current, operating from 3 V to 5 V single supply, housed in an 8-pin MSOP. Available worldwide.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT1494IMS8#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $2.7900(MOQ 19)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Rail-to-rail input and output (RRIO) swing maximizes dynamic range on single 3 V or 5 V supplies
- 1 nA maximum input bias current at 25°C enables accurate operation with megohm source impedances
- 96 dB minimum / 114 dB typical CMRR provides exceptional common-mode noise rejection in instrumentation
- 3 kHz gain-bandwidth product in micropower topology minimizes quiescent current for battery-operated sensors
- 8-pin MSOP package for compact precision analog front-ends in space-constrained PCB designs
Applications
The LT1494IMS8#PBF is designed for ultra-low-power precision signal conditioning in battery-operated instruments such as pH meters, electrochemical sensors, and portable medical monitors where nanoamp bias currents and rail-to-rail output swings are essential. Its 114 dB typical CMRR makes it suitable for bridge amplifier configurations in strain gauge and load cell interfaces where common-mode rejection directly affects measurement accuracy. The 3 V to 5 V single-supply operation and micropower quiescent current extend battery life in always-on sensing nodes and remote wireless sensor systems.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1660 |
| YTEOL | 10 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | CURRENT-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.0017 µA |
| Bias Current-Max (IIB) @25C | 0.001 µA |
| Common-mode Reject Ratio-Min | 96dB |
| Common-mode Reject Ratio-Nom | 114dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 775 µV |
| JESD-30 Code | S-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | YES |
| Neg Supply Voltage Limit-Max | -18 V |
| Neg Supply Voltage-Nom (Vsup) | -15 V |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Power | YES |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 0.4V/us |
| Slew Rate-Nom | 1V/us |
| Supply Current-Max | 0.003mA |
| Supply Voltage Limit-Max | 18V |
| Supply Voltage-Nom (Vsup) | 15V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Unity Gain BW-Nom | 2.7 |
| Voltage Gain-Min | 50000 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How low is the input bias current of LT1494IMS8#PBF and which sensor types benefit most from this specification?
The LT1494IMS8#PBF has a maximum input bias current of 1 nA at 25°C. This is critical for high-impedance sensors such as pH electrodes (source impedance of 1 MΩ to 100 MΩ), photodiodes in transimpedance configurations, and ion-selective electrodes where even 10 nA of bias current flowing through a 10 MΩ source impedance would create a 100 mV offset error, overwhelming the signal of interest.
What is the CMRR of LT1494IMS8#PBF and why does a 114 dB rejection matter in a Wheatstone bridge measurement?
The LT1494IMS8#PBF achieves 114 dB typical common-mode rejection ratio. In a Wheatstone bridge for strain or pressure measurement, the bridge output is a small differential signal riding on a large common-mode voltage equal to half the supply (e.g., 1.65 V on a 3.3 V system). At 114 dB CMRR, a 1.65 V common-mode voltage contributes only 0.1 µV of referred input error, which is negligible compared to the millivolt-scale bridge output signals.
Can LT1494IMS8#PBF operate from a 3.3 V single supply in a solar-powered remote sensor node?
Yes, the LT1494IMS8#PBF operates from 3 V to 5 V single supply, making it directly compatible with a 3.3 V LDO-regulated solar harvesting system. Its micropower quiescent current—typically under 10 µA total—allows continuous 24-hour operation from small supercapacitors or thin-film batteries recharged by modest solar panels of even 0.1 mA average current in low-light environments.
For a pH measurement circuit replacing a bench op-amp with LT1494IMS8#PBF, what board space savings does the MSOP-8 package enable?
The LT1494IMS8#PBF MSOP-8 package measures approximately 3 mm x 3 mm with 0.65 mm pin pitch, compared to 5 mm x 4 mm for a standard SOIC-8. This represents roughly 60% footprint area reduction, freeing board space for the high-impedance guard trace routing and shielding structures that pH electrode interfaces require, while maintaining the same 8-pin pinout as standard DIP-8 compatible op-amp replacements.
Related Guides
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $3.7000 | $70.30 |
| 250+ | $3.1952 | $798.79 |
| 500+ | $3.0375 | $1518.75 |
| 1000+ | $2.7900 | $2790.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”