LSM9DS0 STMicroelectronics Integrated Circuit (Other) In Stock
STMicroelectronics LSM9DS0 is a 9-axis iNEMO inertial module integrating 3D accelerometer, 3D gyroscope, and 3D magnetometer in a single LGA-24 package operating from 2.4 V to 3.6 V supply.
- Manufacturer
- STMicroelectronics
- Package
- Other
- Pin Count
- 24
- Lifecycle
- OBSOLETE
- Datasheet
- LSM9DS0 Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of LSM9DS0?
- 9-axis motion sensing: 3D accelerometer ±2/±4/±6/±8/±16 g, 3D gyroscope ±245/±500/±2000 dps, and 3D magnetometer ±2/±4/±8/±12 gauss in one chip
- Ultra-compact LGA-24 package (3.5 x 3.0 x 1.0 mm) with SPI and I2C digital interfaces for easy MCU integration
- Low-power operation with programmable ODR (output data rates) from 1 Hz to 952 Hz and embedded FIFO for host offload
What is LSM9DS0 used for?
The LSM9DS0 is designed for consumer electronics and industrial IoT applications where compact 9-axis motion sensing is required, such as wearables, smartphones, game controllers, and remote controls. Its integrated gyroscope, accelerometer, and magnetometer enable attitude and heading reference systems (AHRS), step counting, gesture recognition, and image stabilization. The wide supply voltage range (2.4 V to 3.6 V) and low-power modes make it well-suited for battery-powered devices that require continuous motion monitoring.
What are the specifications of LSM9DS0?
| YTEOL | 0 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| JESD-30 Code | S-PBGA-B24 |
| JESD-609 Code | e4 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | GRID ARRAY, THIN PROFILE, FINE PITCH |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Supply Voltage-Nom (Vsup) | 3V |
| Surface Mount | YES |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | BUTT |
| Terminal Pitch | 0.5mm |
| Terminal Position | BOTTOM |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| ## LSM9DS0 Alternates Showing results | Image |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| HTS Code | 8542.39.00.01 |
Where can I find the LSM9DS0 datasheet?
LSM9DS0 Datasheet DownloadOfficial datasheet from STMicroelectronics
What are equivalent replacements for LSM9DS0?
Compatible alternatives and drop-in replacements for LSM9DS0:
STMicroelectronics Accelerometer/Gyroscope, 14 Pin, Plastic/epoxy
STMicroelectronics Accelerometer/Gyroscope, 14 Pin, Plastic
Frequently Asked Questions
What are the full-scale ranges available for each sensor axis in the LSM9DS0?
The LSM9DS0 accelerometer supports ±2 g, ±4 g, ±6 g, ±8 g, and ±16 g full-scale ranges. The gyroscope offers ±245 dps, ±500 dps, and ±2000 dps. The magnetometer covers ±2, ±4, ±8, and ±12 gauss, giving designers fine-grained resolution control across all 9 axes.
Which communication interfaces does the LSM9DS0 support for MCU connectivity?
The LSM9DS0 supports both SPI (up to 10 MHz) and I2C (up to 400 kHz) serial interfaces, letting designers connect it to virtually any microcontroller. The device also provides 2 programmable interrupt pins for threshold-based event detection without continuous host polling.
For a wearable fitness tracker running at 3.3 V, how does the LSM9DS0's output data rate support low-power step counting?
At 3.3 V supply, the LSM9DS0 accelerometer can run as low as 1 Hz ODR in low-power mode, drawing under 1 mA, while the embedded FIFO buffers up to 32 samples so the host processor can sleep between reads, making it ideal for continuous 24-hour step counting in wearables.
What package dimensions does the LSM9DS0 use, and how does that compare to discrete IMU solutions?
The LSM9DS0 is housed in an LGA-24 package measuring 3.5 x 3.0 x 1.0 mm, integrating 9 sensor axes in roughly 10.5 mm² of board area — far smaller than using three separate sensor ICs, which would each require their own bypass capacitors, PCB routing, and decoupling networks.
Related Guides
150141RS73100 Red LED Indicator and Current-Resistor Design Guide
Design a reliable 150141RS73100 red LED indicator with worst-case resistor sizing, GPIO checks, PWM drive, layout, and production validation.
Jul 11, 2026
742792651 Ferrite Bead EMI Filter and Power Integrity Design Guide
Practical guidance for using 742792651 in ferrite-bead EMI filters, including bias, DCR, damping, layout, and validation.
Jul 11, 2026
How to Choose a Ferrite Bead for EMI Suppression Rails: Selection Guide
Compare 742792651 and related ferrite beads by impedance, current rating, DCR, package, layout, and EMI test context.
Jul 10, 2026
150141BS73100 Design Guide for 3528 Status Indicator LED Circuits
Design 3528 status indicator LED circuits with 150141BS73100: current setting, resistor sizing, polarity, optics, and sourcing checks.
Jul 10, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit