LQW15AN12NJ00DAlternatives & Equivalent Parts
About LQW15AN12NJ00D
LQW15AN12NJ00D is a Inductor component manufactured by Murata Electronics. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for LQW15AN12NJ00D — response within 24 hours.
Specification Comparison
| Parameter | LQW15AN12NJ00DSource | TUSB4020BIPHPR | MIC39100-5.0WS | 39-53-2154 | C315C101J2G5TA |
|---|---|---|---|---|---|
| Manufacturer | Murata Electronics | Texas Instruments | Microchip | Molex | Kemet |
| Package Type | Other | Quad Flat Packages | SOT223 (3-Pin) | Other | Other |
| Pin Count | 2 | 49 | 3 | 15 | 2 |
| Temperature Range | — | -40.0°C ~ 85.0°C | — | -20.0°C ~ 80.0°C | — |
| Price | $0.0395 | $2.3440 | $0.8279 | $0.8123 | $0.0552 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| Pbfree Code | Yes | Yes | — | Yes | — |
| Factory Lead Time | 14 Weeks | — | 21 Weeks | 19 Weeks | — |
| YTEOL | 7 | 15 | 8 | 6 | — |
| Case/Size Code | 1005/0402 | — | — | — | — |
| Construction | Wirewound Chip | — | — | — | — |
| Core Material | WIREWOUND | — | — | — | — |
| DC Resistance | 0.14 Ω | — | — | — | — |
| Inductance-Nom (L) | 0.012 µH | — | — | — | — |
| Inductor Application | RF INDUCTOR | — | — | — | — |
| Inductor Type | GENERAL PURPOSE INDUCTOR | — | — | — | — |
| JESD-609 Code | e3 | e4 | e3 | e6 | — |
| Number of Functions | 1 | — | 1 | — | — |
| Package Height | 0.5 mm | — | — | — | — |
| Package Length | 1 mm | — | — | — | — |
| Package Style | SMT | FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH | SMALL OUTLINE | — | — |
| Package Width | 0.6 mm | — | — | — | — |
| Packing Method | TR, PAPER, 7 INCH | — | TUBE | — | — |
| Quality Factor-Min (at L-nom) | 30 | — | — | — | — |
| Rated Current-Max | 0.5 A | — | — | — | — |
| Self Resonance Frequency | 5500 MHz | — | — | — | — |
| Shape/Size Description | RECTANGULAR PACKAGE | — | — | — | — |
| Shielded | NO | — | — | — | — |
| Special Feature | Q MEASURED AT 250 MHZ | — | — | — | — |
| Surface Mount | Reflow soldering | YES | YES | — | — |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | — | — |
| Terminal Placement | DUAL ENDED | — | — | — | — |
| Terminal Shape | ONE SURFACE | — | — | — | — |
| Test Frequency | 250 MHz | — | — | — | — |
| Tolerance | 5% | — | — | — | — |
| Bus Compatibility | — | I2C, SMBUS, USB | — | — | — |
| Clock Frequency-Max | — | 24 MHz | — | — | — |
| Data Transfer Rate-Max | — | 0.0125 MBps | — | — | — |
| JESD-30 Code | — | S-PQFP-G48 | R-PDSO-G3 | — | — |
| Package Body Material | — | PLASTIC/EPOXY | PLASTIC/EPOXY | — | — |
| Package Equivalence Code | — | TQFP48,.35SQ | SOT-223 | — | — |
| Package Shape | — | SQUARE | RECTANGULAR | — | — |
| Peak Reflow Temperature (Cel) | — | 260 | — | — | — |
| Supply Current-Max | — | 80 mA | — | — | — |
| Supply Voltage-Max | — | 1.26 V | — | — | — |
| Supply Voltage-Min | — | 0.99 V | — | — | — |
| Supply Voltage-Nom | — | 1.1 V | — | — | — |
| Technology | — | CMOS | — | — | — |
| Terminal Form | — | GULL WING | GULL WING | — | — |
| Terminal Pitch | — | 0.5 mm | 2.31 mm | 1.25 mm | — |
| Terminal Position | — | QUAD | SINGLE | — | — |
| Time@Peak Reflow Temperature-Max (s) | — | 30 | — | — | — |
| uPs/uCs/Peripheral ICs Type | — | BUS CONTROLLER, UNIVERSAL SERIAL BUS | — | — | — |
| ## TUSB4020BIPHPR Alternates Showing results | — | Image | — | — | — |
| Manufacturer Package Code | — | — | SOT-223-3 | — | — |
| Adjustability | — | — | FIXED | — | — |
| Dropout Voltage1-Max | — | — | 0.63 V | — | — |
| Dropout Voltage1-Nom | — | — | 0.41 V | — | — |
| Input Voltage Absolute-Max | — | — | 20 V | — | — |
| Input Voltage-Max | — | — | 16 V | — | — |
| Input Voltage-Min | — | — | 6 V | — | — |
| Line Regulation-Max | — | — | 0.025% | — | — |
| Load Regulation-Max | — | — | 0.05% | — | — |
| Number of Outputs | — | — | 1 | — | — |
| Operating Temperature TJ-Max | — | — | 125 °C | — | — |
| Operating Temperature TJ-Min | — | — | -40 °C | — | — |
| Output Current1-Max | — | — | 1 A | — | — |
| Output Voltage1-Max | — | — | 5.1 V | — | — |
| Output Voltage1-Min | — | — | 4.9 V | — | — |
| Output Voltage1-Nom | — | — | 5 V | — | — |
| Qualification Status | — | — | Not Qualified | — | — |
| Regulator Type | — | — | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | — | — |
| Voltage Tolerance-Max | — | — | 2% | — | — |
| ## MIC39100-5.0WS Alternates Showing results | — | — | Image | — | — |
| Body Breadth | — | — | — | 0.213 inch | — |
| Body Depth | — | — | — | 0.386 inch | — |
| Body Length | — | — | — | 0.965 inch | — |
| Connector Type | — | — | — | FFC/FPC CONNECTOR | — |
| Contact Finish Mating | — | — | — | NOT SPECIFIED | — |
| Contact Finish Termination | — | — | — | Tin/Bismuth (Sn/Bi) | — |
| Contact Gender | — | — | — | FEMALE | — |
| Contact Material | — | — | — | NOT SPECIFIED | — |
| Contact Pattern | — | — | — | RECTANGULAR | — |
| Contact Resistance | — | — | — | 20 mΩ | — |
| Contact Style | — | — | — | BELLOWED TYPE | — |
| DIN Conformance | — | — | — | NO | — |
| Dielectric Withstanding Voltage | — | — | — | 700VAC V | — |
| Durability | — | — | — | 30 Cycles | — |
| Filter Feature | — | — | — | NO | — |
| IEC Conformance | — | — | — | NO | — |
| Insertion Force-Max | — | — | — | ZIF N | — |
| Insulation Resistance | — | — | — | 500000000 Ω | — |
| Insulator Color | — | — | — | NATURAL | — |
| Insulator Material | — | — | — | POLYBUTYLENE TEREPHTHALATE | — |
| MIL Conformance | — | — | — | NO | — |
| Mating Contact Pitch | — | — | — | 0.049 inch | — |
| Mixed Contacts | — | — | — | NO | — |
| Mounting Option 1 | — | — | — | LOCKING | — |
| Mounting Style | — | — | — | RIGHT ANGLE | — |
| Mounting Type | — | — | — | BOARD | — |
| Number Of Connectors | — | — | — | ONE | — |
| Number Of PCB Rows | — | — | — | 2 | — |
| Number of Rows Loaded | — | — | — | 1 | — |
| Option | — | — | — | GENERAL PURPOSE | — |
| PCB Contact Pattern | — | — | — | STAGGERED | — |
| PCB Contact Row Spacing | — | — | — | 5 mm | — |
| Plating Thickness | — | — | — | 40u inch | — |
| Rated Current (Signal) | — | — | — | 1 A | — |
| Reference Standard | — | — | — | UL | — |
| Terminal Length | — | — | — | 0.138 inch | — |
| Termination Type | — | — | — | SOLDER | — |
| Total Number of Contacts | — | — | — | 15 | — |
| UL Flammability Code | — | — | — | 94V-0 | — |
| Withdrawl Force-Min | — | — | — | ZIF N | — |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for LQW15AN12NJ00D — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for LQW15AN12NJ00D is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating LQW15AN12NJ00D replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for LQW15AN12NJ00D. Get expert recommendations within 24 hours.
FAQ
What is equivalent to LQW15AN12NJ00D?
Known equivalents for LQW15AN12NJ00D include TUSB4020BIPHPR, MIC39100-5.0WS, 39-53-2154. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of LQW15AN12NJ00D?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify LQW15AN12NJ00D alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.