LP3984IMFX-1.5HALF Texas Instruments Integrated Circuit (SOT23 (5-Pin)) In Stock

LP3984IMFX-1.5HALF is a 150 mA ultra-low-dropout LDO linear voltage regulator with a fixed 1.5 V output in a 5-pin SOT-23 package. It operates from a 2.5 V to 6 V input, features a 72 µA typical quiescent current, and requires only a 1 µF output capacitor, targeting portable consumer electronics and wireless module power supply applications.

ACTIVEIntegrated CircuitVerified May 2026
Package / Visual Reference
LP3984IMFX-1.5HALFSOT23 (5-Pin)
Quick Facts
Manufacturer
Texas Instruments
Package
SOT23 (5-Pin)
Pin Count
5
Lifecycle
ACTIVE
Category
Integrated Circuit
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LP3984IMFX-1.5HALF?

  • Fixed 1.5 V output with 150 mA maximum load current
  • Ultra-low 72 µA quiescent current for extended battery life
  • 2.5 V to 6 V input range covering Li-Ion, USB, and 3.3 V/5 V system rails
  • Only 1 µF output capacitor required for stable operation
  • 5-pin SOT-23 package for ultra-compact PCB designs
  • Stable with ceramic output capacitors enabling miniaturised power circuits

What is LP3984IMFX-1.5HALF used for?

The LP3984IMFX-1.5HALF is designed for space-constrained portable devices such as Bluetooth modules, wireless sensors, and wearable electronics that require a stable 1.5 V supply rail at up to 150 mA from a Li-Ion battery or a 3.3 V system bus. Its 72 µA quiescent current and 5-pin SOT-23 footprint also make it a suitable choice for always-on microcontroller sleep-mode power rails and camera module analog supply circuits in smartphones and IoT devices.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the LP3984IMFX-1.5HALF datasheet?

LP3984IMFX-1.5HALF Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for LP3984IMFX-1.5HALF?

Compatible alternatives and drop-in replacements for LP3984IMFX-1.5HALF:

LP3984IMF-1.5/NOPBTexas Instruments

Fixed Positive LDO Regulator, 1.5V, 0.12V Dropout, CMOS, PDSO5

View Part →

Frequently Asked Questions

What output voltage and maximum current does the LP3984IMFX-1.5HALF provide?

The device delivers a fixed 1.5 V output at up to 150 mA, with a typical output accuracy of ±1%, making it suitable for powering RF transceiver analog sections, low-power microcontrollers, and sensor interface circuits that require a regulated 1.5 V supply from a 2.5 V to 6 V source.

How does the low quiescent current of the LP3984IMFX-1.5HALF extend battery life in wireless IoT designs?

With only 72 µA typical quiescent current at no load and a 1.5 V output, the regulator draws less than 0.1% of a 100 mAh coin-cell capacity per hour in standby, allowing a wireless sensor node to remain powered for more than 1000 hours in sleep mode between transmit bursts.

What output capacitor does the LP3984IMFX-1.5HALF require for stability?

The device is stable with a minimum 1 µF ceramic capacitor (X5R or X7R) on the output, eliminating the need for tantalum or electrolytic capacitors and reducing the BOM to a single passive component at the output, which saves PCB area and cost in compact wearable and IoT module designs.

Is the LP3984IMFX-1.5HALF compatible with Li-Ion battery input voltages through discharge?

Yes, the 2.5 V minimum input voltage allows the regulator to continue producing 1.5 V output as a single Li-Ion cell discharges from 4.2 V down to roughly 2.7 V, providing reliable operation across the full useful discharge range of the battery without a boost converter.

How does the 5-pin SOT-23 package of LP3984IMFX-1.5HALF benefit module-level power design?

The SOT-23-5 package measures approximately 2.9 mm x 1.6 mm, making it one of the smallest available LDO packages and enabling placement within the tight keepout areas of RF modules, Bluetooth chips, and camera sensor PCBs where a TO-252 or SOT-223 regulator would not fit within the space constraints.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India