LP2982AIM5X-5.0S7003010 Texas Instruments Integrated Circuit (SOT23 (5-Pin)) In Stock

The LP2982AIM5X-5.0S7003010 is a 5.0 V fixed-output ultra-low-noise LDO linear regulator delivering 200 mA in a 5-pin SOT-23 package. It operates from a wide input range with low dropout voltage, providing a stable, noise-free 5 V supply for RF modules, ADCs, and other noise-sensitive portable applications.

ACTIVEIntegrated CircuitVerified May 2026
Package / Visual Reference
LP2982AIM5X-5.0S7003010SOT23 (5-Pin)
Quick Facts
Manufacturer
Texas Instruments
Package
SOT23 (5-Pin)
Pin Count
5
Lifecycle
ACTIVE
Category
Integrated Circuit
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LP2982AIM5X-5.0S7003010?

  • Fixed 5.0 V output with ultra-low output noise enables clean supply for RF transceivers and precision ADC reference circuits
  • 200 mA output current capability in a compact 5-pin SOT-23 footprint suits space-constrained portable and wearable designs
  • Low dropout voltage allows efficient regulation from Li-ion battery packs with minimal headroom loss at 5 V output

What is LP2982AIM5X-5.0S7003010 used for?

The LP2982AIM5X-5.0S7003010 is designed for RF and analog mixed-signal circuits that require a clean, low-noise 5 V regulated supply. Its ultra-low noise characteristic makes it the preferred LDO for powering voltage-controlled oscillators, PLL circuits, and high-resolution ADC reference inputs where switching regulator interference degrades performance. The SOT-23 package enables integration into compact wireless sensor nodes, GPS receivers, and industrial handheld instruments.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the LP2982AIM5X-5.0S7003010 datasheet?

LP2982AIM5X-5.0S7003010 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for LP2982AIM5X-5.0S7003010?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

Why is LP2982AIM5X-5.0S7003010 preferred over switching regulators for powering RF front-end circuits at 5 V?

Switching regulators inject switching noise at frequencies from 100 kHz to several MHz, which desensitizes RF receivers and increases phase noise in PLL circuits. LP2982AIM5X-5.0S7003010's ultra-low noise LDO architecture suppresses this interference, maintaining receiver sensitivity and oscillator spectral purity in 5 V powered RF modules, GPS receivers, and Bluetooth front-ends.

What output current does LP2982AIM5X-5.0S7003010 provide and which load types does it support at 5 V?

LP2982AIM5X-5.0S7003010 delivers up to 200 mA continuous output current at 5.0 V, sufficient for powering microcontrollers drawing 50–100 mA, RF transceivers up to 150 mA peak, and mixed-signal analog circuits. The 5-pin SOT-23 package handles this current without a heatsink in typical ambient temperatures up to 85°C.

How does LP2982AIM5X-5.0S7003010 fit into a battery-powered GPS tracker requiring a 5 V supply?

In a GPS tracker powered by a 2-cell Li-ion pack at 7.4 V, LP2982AIM5X-5.0S7003010 regulates down to a clean 5.0 V rail for the GPS module. Its ultra-low noise output minimizes phase noise in the GPS oscillator, improving position fix time and accuracy, while the compact SOT-23 package keeps PCB footprint below 5 mm² for wearable GPS device integration.

When would LP2982AIM5X-5.0S7003010 be selected over LP2985 in a 5 V noise-sensitive analog design?

LP2982AIM5X-5.0S7003010 is selected when output noise specification is the primary concern and 200 mA load current is sufficient, offering lower noise density than LP2985 variants at equivalent current. For 5 V precision data acquisition front-ends with 16-bit or higher ADCs, LP2982's lower noise floor preserves effective resolution that LP2985's slightly higher noise would compromise at full sampling rates.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India