LMK316ABJ476ML-T TAIYO YUDEN Capacitor (Capacitor Chip Non-polarised) In Stock
Taiyo Yuden LMK316ABJ476ML-T is a 47 µF, 10 V DC, ±20% MLCC in a 1206 (3216M) SMD package with ceramic dielectric and 1.6 mm height. It provides reliable bulk capacitance decoupling for power rails in consumer electronics and industrial power supplies.
- Manufacturer
- TAIYO YUDEN
- Package
- Capacitor Chip Non-polarised
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- LMK316ABJ476ML-T Datasheet PDF
- Category
- Capacitor
- Temp Range
- -55.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 47 µF capacitance at 10 V DC rating in a compact 1206 (3216M) package for high-density power decoupling on space-constrained PCBs
- X5R or similar stable ceramic dielectric ensures capacitance remains consistent over a wide temperature range for reliable filtering
- ±20% capacitance tolerance balances cost and performance for bulk decoupling and bypass applications
- RoHS-compliant and REACH-compliant construction with lead-free terminations for global market compliance
Applications
The LMK316ABJ476ML-T is used as a bulk decoupling and power-rail filter capacitor in smartphone power management circuits, portable consumer electronics, and DC-DC converter output stages operating at up to 10 V. Its 47 µF capacitance in the 1206 footprint provides low-impedance energy storage for transient loads on 3.3 V, 5 V, and 9 V rails. It is also deployed in automotive infotainment power supplies and industrial sensor modules where compact, reliable ceramic capacitors replace electrolytic alternatives.
Specifications
| Pbfree Code | Yes |
| Reach Compliance Code | Compliant |
| Factory Lead Time | 14Weeks |
| YTEOL | 7 |
| Capacitance | 47 µF |
| Capacitor Type | CERAMIC CAPACITOR |
| Dielectric Material | CERAMIC |
| Height | 1.6mm |
| JESD-609 Code | e3 |
| Mounting Feature | SURFACE MOUNT |
| Multilayer | Yes |
| Negative Tolerance | 20% |
| Package Shape | RECTANGULAR PACKAGE |
| Package Style | SMT |
| Packing Method | TR, EMBOSSED, 7 INCH |
| Positive Tolerance | 20% |
| Rated (DC) Voltage (URdc) | 10V |
| Size Code | 1206 |
| Surface Mount | YES |
| Tan Delta | 0.1 |
| Temperature Characteristics Code | X5R |
| Temperature Coefficient | 15% ppm/°C |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Shape | WRAPAROUND |
| Package | Capacitor Chip Non-polarised |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8532.24.00.20 |
| Country of Origin | Japan, Mainland China, Malaysia, South Korea |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the voltage and capacitance rating of the LMK316ABJ476ML-T, and how should designers derate it?
The LMK316ABJ476ML-T is rated at 47 µF capacitance and 10 V DC. Due to DC bias effect in ceramic capacitors, effective capacitance decreases significantly at higher voltages; designers should apply a 50% voltage derating, using this capacitor on rails of 5 V or below to maintain practical capacitance close to the nominal 47 µF value.
How does the 1206 package size of the LMK316ABJ476ML-T compare to a tantalum capacitor with similar 47 µF capacitance?
The LMK316ABJ476ML-T occupies a 3.2 mm x 1.6 mm footprint in the 1206 form factor, comparable to a B-case or C-case tantalum capacitor at 47 µF. However, the ceramic MLCC offers lower ESR (equivalent series resistance) than tantalum—typically under 10 mΩ versus several hundred mΩ—making it a better choice for high-frequency power decoupling above 1 MHz.
For a 5 V USB power input filter requiring 47 µF capacitance with minimal board space, why is the LMK316ABJ476ML-T suitable?
The LMK316ABJ476ML-T provides 47 µF at 10 V DC in a 1206 (3.2 mm x 1.6 mm) SMD package, fitting comfortably on a single PCB pad near the USB power input pin. Its ceramic dielectric delivers low ESR for effective high-frequency ripple suppression on 5 V rails, outperforming electrolytic alternatives at the same footprint while requiring no polarity orientation during placement.
What is the factory lead time for the LMK316ABJ476ML-T, and how should procurement teams plan for it?
The LMK316ABJ476ML-T has a factory lead time of 14 weeks. Procurement teams should maintain a safety stock of at least 6 to 8 weeks of consumption and place purchase orders 14 to 16 weeks ahead of production start dates to avoid line stoppages, especially for high-volume consumer electronics programs where demand for 47 µF 10 V 1206 MLCCs can spike rapidly.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About TAIYO YUDEN
TAIYO YUDEN is a leading electronic component manufacturer. FindMyChip sources TAIYO YUDEN ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”