LM3S9971-IQC80-C3 Texas Instruments Integrated Circuit (Other) In Stock

Texas Instruments LM3S9971-IQC80-C3 is a 32-bit ARM Cortex-M3 microcontroller running up to 80 MHz with 256 KB flash, 96 KB SRAM, 72 GPIO pins, ADC, PWM, DMA, and Ethernet MAC in a 100-pin LQFP package. It integrates a full CAN 2.0B controller and USB OTG interface for rich connectivity in industrial and automotive applications. Available from stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified May 2026
Package / Visual Reference
LM3S9971-IQC80-C3Other
Quick Facts
Manufacturer
Texas Instruments
Package
Other
Pin Count
100
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LM3S9971-IQC80-C3?

  • 32-bit ARM Cortex-M3 core at up to 80 MHz with 256 KB flash and 96 KB SRAM, providing ample compute and storage for real-time control firmware
  • Integrated 10/100 Ethernet MAC with MII/RMII interface and USB OTG 2.0 FS, enabling dual-protocol wired connectivity without external bridge chips
  • 72 GPIO pins with DMA, 12-bit ADC, PWM channels, CAN 2.0B, I2C, SPI, and UART peripherals in a 100-pin LQFP package for comprehensive embedded system integration

What is LM3S9971-IQC80-C3 used for?

LM3S9971-IQC80-C3 targets industrial automation controllers, networked sensor nodes, and embedded HMI panels that require concurrent Ethernet, USB, and CAN bus communication. Its 80 MHz Cortex-M3 core with hardware DMA supports real-time data acquisition from 12-bit ADC channels while simultaneously handling multi-protocol communication stacks. The 100-pin LQFP footprint fits standard PCB designs for motor drives, building controllers, and factory automation gateways requiring broad I/O and connectivity.

What are the specifications of LM3S9971-IQC80-C3?

Pbfree CodeYes
YTEOL0
Has ADCYES
Bit Size32
Clock Frequency-Max16.384MHz
DAC ChannelsNO
DMA ChannelsYES
JESD-30 CodeS-PQFP-G100
Number of I/O Lines72
PWM ChannelsYES
Package Body MaterialPLASTIC/EPOXY
Package ShapeSQUARE
Package StyleFLATPACK, LOW PROFILE, FINE PITCH
ROM ProgrammabilityFLASH
Speed80MHz
Supply Voltage-Max1.365V
Supply Voltage-Min1.235V
Supply Voltage-Nom1.3V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionQUAD
uPs/uCs/Peripheral ICs TypeMICROCONTROLLER, RISC
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 3
HTS Code8542.31.00.25

Where can I find the LM3S9971-IQC80-C3 datasheet?

LM3S9971-IQC80-C3 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for LM3S9971-IQC80-C3?

Compatible alternatives and drop-in replacements for LM3S9971-IQC80-C3:

LM3S9971-IQC80-C3TTexas Instruments

RISC Microcontroller, 32-Bit, FLASH, 80MHz, CMOS, PQFP100

View Part →
LM3S9997-IQC80-C3Texas Instruments

uPs/uCs/Peripheral ICs

View Part →
LM3S9997-IQC80-C3TTexas Instruments

uPs/uCs/Peripheral ICs

View Part →

Frequently Asked Questions

What is the maximum clock frequency and memory configuration of the LM3S9971-IQC80-C3?

The LM3S9971-IQC80-C3 operates at up to 80 MHz with an internal PLL from a 6 MHz to 16.384 MHz external crystal. It provides 256 KB of on-chip flash for program storage and 96 KB of SRAM for runtime data, sufficient for a complete TCP/IP stack plus application firmware in a single chip. The hardware DMA controller with 32 channels moves data between peripherals and SRAM at bus speed, relieving the Cortex-M3 core for application logic.

Which industrial communication interfaces are built into LM3S9971-IQC80-C3 for factory automation designs?

LM3S9971-IQC80-C3 integrates a 10/100 Ethernet MAC with MII interface, USB OTG 2.0 Full-Speed, CAN 2.0B controller, up to 3 UART ports, 2 SSI/SPI interfaces, and 2 I2C buses — all accessible through 72 GPIO pins on the 100-pin LQFP package. This peripheral set allows a single-chip design to bridge a CAN 2.0B field bus at 1 Mbit/s to an Ethernet network at 100 Mbit/s without external protocol converter ICs, reducing BOM cost and board area by at least 30% versus a multi-chip approach.

When is LM3S9971-IQC80-C3 a practical choice over a higher-MHz Cortex-M4 for a networked sensor hub?

LM3S9971-IQC80-C3 is the right choice when the design already requires Ethernet, USB, and CAN 2.0B together in a 100-pin LQFP at a lower cost than a Cortex-M4 device with the same peripheral set. Its 80 MHz Cortex-M3 core delivers roughly 100 DMIPS, more than enough for a networked sensor hub polling 12-bit ADC channels at 1 MS/s and streaming data over 10/100 Ethernet. If floating-point DSP is not needed, the simpler M3 pipeline reduces power consumption by approximately 20% compared to equivalent M4F solutions at the same clock frequency.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India