LM3S2B93-IQC80-C0 Texas Instruments Integrated Circuit (Other) In Stock

LM3S2B93-IQC80-C0 is a 32-bit ARM Cortex-M3 Stellaris microcontroller running at up to 80 MHz with on-chip Flash and SRAM. It integrates Ethernet MAC/PHY, USB OTG, CAN, and a rich set of analog and digital peripherals. Targeted at industrial networking, building automation, and embedded control applications requiring connectivity.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LM3S2B93-IQC80-C0Other
Quick Facts
Manufacturer
Texas Instruments
Package
Other
Pin Count
100
Lifecycle
ACTIVE
Datasheet
N/A
Category
Integrated Circuit
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LM3S2B93-IQC80-C0?

  • 32-bit ARM Cortex-M3 core clocked at up to 80 MHz for high-performance control
  • Integrated 10/100 Ethernet MAC/PHY for direct network connectivity without external PHY
  • USB OTG (On-The-Go) controller supporting both host and device roles
  • CAN 2.0B controller for industrial field-bus communication
  • Multiple 12-bit ADC channels, PWM generators, and UART/SPI/I2C peripherals
  • QFP-package form factor with industrial-grade temperature operation

What is LM3S2B93-IQC80-C0 used for?

LM3S2B93-IQC80-C0 targets industrial networking gateways, building automation controllers, and factory-floor edge nodes that require simultaneous Ethernet, USB, and CAN connectivity from a single 32-bit MCU. Its 80 MHz Cortex-M3 core provides sufficient headroom for embedded TCP/IP stacks and real-time control loops. The device is also suited for energy management systems and smart grid metering where Ethernet-connected endpoints must also interface with local CAN or serial field buses.

What are the specifications of LM3S2B93-IQC80-C0?

YTEOLEYTEOL
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Country of OriginCountry of Origin

What are equivalent replacements for LM3S2B93-IQC80-C0?

Compatible alternatives and drop-in replacements for LM3S2B93-IQC80-C0:

LM3S2B93-IQC80-C3Texas Instruments

uPs/uCs/Peripheral ICs

View Part →
LM3S2B93-IQC80-C3TTexas Instruments

uPs/uCs/Peripheral ICs

View Part →

Frequently Asked Questions

How does LM3S2B93-IQC80-C0's integrated Ethernet MAC/PHY reduce BOM complexity in networked industrial designs?

LM3S2B93-IQC80-C0 includes an on-chip 10/100 Ethernet MAC/PHY, eliminating the need for a separate external PHY IC and its associated magnetics-selection complexity. This saves board space and reduces BOM cost, while the 80 MHz ARM Cortex-M3 core has enough throughput to run a lightweight TCP/IP stack alongside real-time control tasks.

Can LM3S2B93-IQC80-C0 serve as both a USB host and a USB device in a single embedded design?

Yes. The integrated USB OTG controller supports both host and device modes, allowing the MCU to act as a USB device when connected to a PC for firmware updates or data logging, and to switch to host mode to communicate with USB peripherals such as storage drives or HID input devices. This dual-role capability is enabled without any external USB controller IC.

What clock speed does LM3S2B93-IQC80-C0 run at, and how does that compare to common 48 MHz Cortex-M0 alternatives?

LM3S2B93-IQC80-C0 operates at up to 80 MHz, providing roughly 67% more clock cycles per second than a typical 48 MHz Cortex-M0 device. When combined with the 32-bit Cortex-M3 pipeline and hardware divide instructions, this translates to substantially higher real-time performance for applications with simultaneous Ethernet, CAN, and ADC workloads.

What is the lifecycle risk for LM3S2B93-IQC80-C0, and should procurement teams plan for a replacement?

The YTEOL field for LM3S2B93-IQC80-C0 is marked EYTEOL, indicating that the end-of-life timeline has already been reached or is imminent. Procurement teams should treat this part as end-of-life and qualify a modern replacement such as a TM4C or STM32 Ethernet-capable MCU to avoid supply disruptions in production programs planning beyond 12 months.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India