LM3710XKMM-463 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Texas Instruments LM3710XKMM-463 is a dual-channel voltage supervisor and reset IC in a 10-pin MSOP package. It features a watchdog timer, manual reset input, and power-fail input for robust system monitoring. Ideal for microcontroller reset management and power sequencing in embedded and industrial applications.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LM3710XKMM-463Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
10
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LM3710XKMM-463?

  • Dual-channel voltage supervision with independent threshold monitoring
  • Integrated watchdog timer (WD) for autonomous microcontroller fault detection
  • Manual reset input enables user-initiated or hardware-triggered system restart
  • Power-fail input (PW FL IP) for early warning before supply voltage collapse
  • Compact MSOP-10 package for space-constrained embedded system designs

What is LM3710XKMM-463 used for?

The LM3710XKMM-463 is commonly used in microcontroller-based embedded systems to ensure reliable power-on reset and watchdog supervision across dual supply rails. Industrial control units and communication equipment use its power-fail input to trigger safe shutdown before voltage drops below the 463 mV threshold setting. It also fits consumer electronics and IoT devices requiring a compact 10-pin supervisor with manual reset and watchdog functions.

What are the specifications of LM3710XKMM-463?

Pbfree CodeNo
YTEOL0
Additional FeatureBAT BUP SW:N;MNL RST:Y;OV DET:N;PW FL IP:Y;PW FL IO:N;PW FL OP:N;PRG RST DLY:N;UV DET:N;WD:Y;WWD:N
Adjustable ThresholdNO
Analog IC - Other TypeVOLTAGE SUPERVISOR/RESET IC
JESD-30 CodeS-PDSO-G10
JESD-609 Codee0
Number of Channels2
Number of Functions1
Package Body MaterialPLASTIC/EPOXY
Package ShapeSQUARE
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)1V
Supply Voltage-Nom (Vsup)1.2V
Surface MountYES
Temperature GradeINDUSTRIAL
Terminal FinishTIN LEAD
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionDUAL
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the LM3710XKMM-463 datasheet?

LM3710XKMM-463 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for LM3710XKMM-463?

Compatible alternatives and drop-in replacements for LM3710XKMM-463:

LM3710XQMM-308Texas Instruments

Voltage Supervisor/Reset IC, Fixed, 2 Channel, CMOS, PDSO10

View Part →

Frequently Asked Questions

How does the watchdog timer in LM3710XKMM-463 protect microcontroller systems from firmware lockups?

The LM3710XKMM-463 watchdog timer monitors a periodic kick signal from the host microcontroller. If the MCU fails to toggle the WDI pin within the programmed timeout window (typically 1.6 s to 102 s depending on variant), the supervisor asserts a reset pulse to restart the CPU, preventing firmware lockups in industrial and embedded 3.3 V or 5 V systems.

What voltage threshold does the LM3710XKMM-463 monitor, and how is it set?

The LM3710XKMM-463 uses a fixed threshold encoded in the part number suffix '-463', corresponding to approximately 4.63 V supervision on one channel. This fixed-threshold design eliminates the need for external resistor dividers, reducing component count by 2 resistors and improving threshold accuracy to within ±1.5% over -40°C to 125°C.

Can the LM3710XKMM-463 be used in dual-supply systems where both 3.3 V and 5 V rails need supervision?

Yes, the LM3710XKMM-463 provides 2 independent monitoring channels that can supervise separate supply voltages. Each channel asserts a reset signal independently when its rail falls below the threshold, making it suitable for dual-supply SoC designs, FPGAs, and DSPs that require sequenced bring-up with individual 3.3 V and 5 V or 1.8 V rail checks.

What is the physical size of the MSOP-10 package used by LM3710XKMM-463?

The MSOP-10 package measures approximately 3.0 mm × 3.0 mm with a pitch of 0.5 mm between leads, occupying less than 9 mm² of PCB area. This compact footprint allows the LM3710XKMM-463 to be placed within 10 mm of the main power supply rails, minimizing trace inductance and improving reset signal accuracy in space-constrained PCB layouts.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India