LM3704XBMM-463 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

Texas Instruments LM3704XBMM-463 is a single-channel voltage supervisor and reset IC monitoring a 4.63 V threshold with manual reset capability and power-fail input. It generates a system reset signal when supply voltage drops below the preset 4.63 V threshold to prevent processor glitching. Packaged in a 10-pin TSSOP for compact space-constrained embedded system power management.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LM3704XBMM-463Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
10
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LM3704XBMM-463?

  • Single-channel voltage supervisor with fixed 4.63 V reset threshold for 5 V rail monitoring
  • Manual reset input allowing external push-button initiated system reset events
  • Power-fail input monitoring a secondary rail before the main reset assertion occurs
  • 10-pin TSSOP package enabling minimal PCB footprint in dense embedded designs
  • Fixed-threshold non-adjustable architecture reducing external component count to near zero

What is LM3704XBMM-463 used for?

The LM3704XBMM-463 is used in embedded microprocessor and DSP systems operating from a 5 V rail where reliable power-on reset and brownout protection at 4.63 V are required. Its manual reset input supports front-panel reset buttons in industrial controllers, network routers, and set-top boxes without additional glue logic. Consumer electronics, automotive infotainment modules, and communication equipment also rely on this device to ensure orderly startup and shutdown during power supply transitions.

What are the specifications of LM3704XBMM-463?

YTEOL0
Additional FeatureBAT BUP SW:N;MNL RST:Y;OV DET:N;PW FL IP:Y;PW FL IO:N;PW FL OP:N;PRG RST DLY:N;UV DET:N;WD:N;WWD:N
Adjustable ThresholdNO
Analog IC - Other TypeVOLTAGE SUPERVISOR/RESET IC
JESD-30 CodeS-PDSO-G10
Number of Channels1
Number of Functions1
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP10,.19,20
Package ShapeSQUARE
Package StyleSMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)1V
Supply Voltage-Nom (Vsup)1.2V
Surface MountYES
Temperature GradeINDUSTRIAL
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionDUAL
Threshold Voltage-Nom+4.63V
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the LM3704XBMM-463 datasheet?

LM3704XBMM-463 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for LM3704XBMM-463?

Compatible alternatives and drop-in replacements for LM3704XBMM-463:

LM3704XCMM-308/NOPBTexas Instruments

Voltage Supervisor/Reset IC, Fixed, 2 Channel, +3.08V, CMOS, PDSO10

View Part →

Frequently Asked Questions

At what voltage threshold does LM3704XBMM-463 assert a system reset signal?

The LM3704XBMM-463 asserts its reset output when the monitored supply voltage falls below the fixed 4.63 V threshold, protecting 5 V microprocessors and DSPs from operating in an undefined state during brownout or power-up ramp conditions below that level.

Does LM3704XBMM-463 support a manual reset input, and how is it used in industrial equipment?

Yes, it includes a dedicated manual reset input that accepts an active-low signal from an external push-button or system controller, enabling forced system reset at any time independent of supply voltage, which is essential for field-service recovery in industrial PLCs and embedded controllers.

How does LM3704XBMM-463 fit into a compact embedded board given its 10-pin TSSOP package?

The 10-pin TSSOP package measures approximately 3 mm x 4.4 mm with 0.5 mm pitch, occupying minimal PCB area while providing reset supervision, manual reset, and power-fail monitoring for a 5 V microprocessor system without requiring any external resistor dividers for the 4.63 V threshold.

When is LM3704XBMM-463 preferable to an adjustable-threshold supervisor in a fixed 5 V system design?

For a fixed 5 V rail design where the reset threshold is always 4.63 V, using LM3704XBMM-463 eliminates 2 external resistors needed by adjustable supervisors, reduces BOM cost, removes threshold tolerance error from resistor mismatch, and simplifies PCB layout in space-constrained 10-pin footprints.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India