LM3208TL Texas Instruments Integrated Circuit (Other) In Stock

LM3208TL is a current-mode PWM step-down DC-DC converter operating from 2.7 V to 5.5 V input, delivering a regulated output for portable electronics in an 8-ball DSBGA package measuring approximately 1.5 mm × 1.5 mm. It integrates the power MOSFET and achieves up to 95 % efficiency at typical 3.6 V input. Available from stock with worldwide shipping.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LM3208TLOther
Quick Facts
Manufacturer
Texas Instruments
Package
Other
Pin Count
8
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-30.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of LM3208TL?

  • Current-mode PWM control for fast transient response and inherent cycle-by-cycle current limiting
  • 2.7 V to 5.5 V input range covering single Li-ion, 3.3 V, and 5 V USB supply rails
  • Integrated power MOSFET in 8-ball DSBGA package under 1.5 mm × 1.5 mm for ultra-compact designs
  • Up to 95 % efficiency at 3.6 V input minimizing thermal dissipation in space-constrained wearables

What is LM3208TL used for?

LM3208TL is used in portable consumer electronics such as smartphones, digital cameras, and wireless earbuds that need to step down a Li-ion cell voltage to power display backlights, image sensors, or low-voltage logic rails. Its tiny DSBGA footprint allows placement directly under a PCB component or inside module cavities where conventional inductors and capacitors occupy minimal board area. The 2.7 V to 5.5 V input range also makes it suitable for USB-powered accessories and Bluetooth audio modules requiring sub-3.3 V supply rails.

What are the specifications of LM3208TL?

Pbfree CodeYes
YTEOL0
Analog IC - Other TypeSWITCHING REGULATOR
Control ModeCURRENT-MODE
Control TechniquePULSE WIDTH MODULATION
Input Voltage-Max5.5V
Input Voltage-Min2.7V
Input Voltage-Nom3.6V
JESD-30 CodeR-PBGA-B8
JESD-609 Codee1
Number of Functions1
Output Current-Max1.2A
Output Voltage-Max3.6V
Output Voltage-Min0.8V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeBGA8,3X3,20
Package ShapeRECTANGULAR
Package StyleGRID ARRAY, VERY THIN PROFILE, FINE PITCH
Qualification StatusNot Qualified
Screening LevelATEX; TS 16949
Surface MountYES
Switcher ConfigurationBUCK
Switching Frequency-Max2200kHz
TechnologyBICMOS
Temperature GradeOTHER
Terminal FinishTIN SILVER COPPER
Terminal FormBALL
Terminal Pitch0.5mm
Terminal PositionBOTTOM
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the LM3208TL datasheet?

LM3208TL Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for LM3208TL?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What input voltage range does LM3208TL support, and which battery chemistries are compatible?

LM3208TL operates from 2.7 V to 5.5 V input, covering a fully discharged single Li-ion cell at 2.7 V through a 5 V USB supply at 5.5 V. This range is compatible with 1S lithium-polymer packs used in smartphones, single alkaline cells in certain wearables, and 5 V USB bus power in USB-connected accessories without requiring an input regulator stage.

How does current-mode PWM control benefit LM3208TL in dynamic load applications?

Current-mode PWM control in LM3208TL senses the inductor current each switching cycle, enabling the converter to respond to load current steps within one or two switching cycles. This results in tighter output voltage regulation during load transients compared to voltage-mode control, making LM3208TL well-suited for digital loads that switch between sleep at microampere levels and active at tens of milliamperes within microseconds.

For a Bluetooth audio module needing compact power conversion, how small is LM3208TL?

LM3208TL is housed in an 8-ball DSBGA package with a footprint of approximately 1.5 mm × 1.5 mm and a profile height under 0.6 mm. This ultra-compact form factor allows placement directly adjacent to the RF SoC on a Bluetooth module PCB, leaving more area for the antenna keepout zone and reducing the overall module size compared to designs using an SC-70 or SOT-23 packaged regulator.

When would a designer choose LM3208TL over a low-dropout linear regulator for a 3.3 V to 1.8 V conversion?

For a 3.3 V to 1.8 V conversion at 200 mA, a linear regulator dissipates (3.3 V - 1.8 V) × 200 mA = 300 mW as heat, which requires careful thermal management. LM3208TL as a switching regulator achieves up to 95 % efficiency on the same conversion, dissipating only about 16 mW, extending battery run time by approximately 10 to 15 % in a portable product running 8 hours per day.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India