LM3205TLX/NOPB Texas Instruments Integrated Circuit (BGA) In Stock

Texas Instruments LM3205TLX/NOPB is a 650 mA adjustable step-down DC-DC converter optimized for RF power amplifier supply rails in an 8-ball DSBGA package. It accepts 2.7 V to 5.5 V input and delivers 0.8 V to 3.6 V output with current-mode PWM control. Available from stock worldwide with fast shipping.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
LM3205TLX/NOPBBGA
Quick Facts
Manufacturer
Texas Instruments
Package
BGA
Pin Count
8
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-30.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 650 mA current-mode PWM buck converter with adjustable 0.8 V to 3.6 V output for RF PA bias supply
  • 2.7 V to 5.5 V input range supporting operation from single-cell Li-ion down to 3 V rails
  • Miniature 8-ball DSBGA package enabling sub-4 mm x 4 mm total solution size for compact RF modules
  • RoHS-compliant lead-free design with fast transient response for dynamic PA voltage control

Applications

The LM3205TLX/NOPB is specifically optimized for powering RF power amplifiers in cellular handsets, WLAN modules, and Bluetooth transceivers where dynamic voltage scaling of the PA supply improves power efficiency at backed-off output power levels. Its 650 mA output current and fast load transient response support burst-mode RF transmitters that require PA voltage changes within microseconds between time slots. It is also used in portable test equipment and IoT wireless nodes requiring a compact, low-noise DC-DC converter from a lithium-ion battery.

Specifications

Pbfree CodeYes
Reach Compliance CodeCompliant
YTEOL0
Additional FeatureOUTPUT VOLTAGE IS 0.8 TO 3.6V
Analog IC - Other TypeSWITCHING REGULATOR
Control ModeCURRENT-MODE
Control TechniquePULSE WIDTH MODULATION
Input Voltage-Max5.5V
Input Voltage-Min2.7V
Input Voltage-Nom3.6V
JESD-30 CodeR-PBGA-B8
JESD-609 Codee1
Number of Functions1
Output Current-Max0.65A
Output Voltage-Max3.6V
Output Voltage-Min0.8V
Output Voltage-Nom3.4V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeBGA8,3X3,20
Package ShapeRECTANGULAR
Package StyleGRID ARRAY, VERY THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Surface MountYES
Switcher ConfigurationBUCK
Switching Frequency-Max2000kHz
Temperature GradeOTHER
Terminal FinishTIN SILVER COPPER
Terminal FormBALL
Terminal Pitch0.5mm
Terminal PositionBOTTOM
Time@Peak Reflow Temperature-Max (s)30
PackageBGA

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01

Datasheet

LM3205TLX/NOPB Datasheet Download

Official datasheet from Texas Instruments

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What output voltage range and current does the LM3205TLX/NOPB support for RF power amplifier designs?

The LM3205TLX/NOPB provides an adjustable output voltage from 0.8 V to 3.6 V at up to 650 mA continuous output current. This range covers the typical PA supply voltage of 1.8 V to 3.4 V used in 2G, 3G, and WLAN power amplifiers, allowing dynamic voltage scaling to optimize transmitter efficiency across different output power levels.

What input voltage range makes the LM3205TLX/NOPB compatible with lithium-ion battery-powered designs?

The LM3205TLX/NOPB accepts input voltages from 2.7 V to 5.5 V, which covers the discharge range of a single-cell lithium-ion battery (3.0 V to 4.2 V) and standard 3.3 V or 5 V regulated rails. This makes it directly operable from a Li-ion cell without a pre-regulator, extending battery run time in mobile RF devices.

How does the 8-ball DSBGA package of the LM3205TLX/NOPB benefit RF module layout?

The 8-ball DSBGA package measures approximately 1.59 mm x 1.96 mm with a 0.5 mm ball pitch, giving a PCB footprint under 4 mm². Placing the converter directly adjacent to the RF PA die reduces supply trace inductance to under 1 nH, minimizing voltage ripple and switching noise coupling into the PA output at frequencies up to 2.4 GHz.

When is the LM3205TLX/NOPB a better choice than an LDO for RF PA power supply in a handset?

Use the LM3205TLX/NOPB instead of an LDO when the input-to-output voltage drop exceeds 0.5 V, as the buck converter achieves efficiency above 85% while an LDO would dissipate the excess voltage as heat with efficiency below 70% at 650 mA. For a 3.7 V battery powering a 1.8 V PA, the LM3205 saves roughly 400 mW of thermal dissipation, directly extending handset talk time.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.

RP
Rajesh Patel
Procurement Manager, VoltEdge Energy, India