LM20154MH Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
The LM20154MH is a current-mode synchronous buck controller from Texas Instruments operating from 2.95 V to 5.5 V input using pulse-width modulation control. It drives external FETs for flexible power stage design and is housed in a 16-pin SOIC package. Suitable for programmable step-down DC-DC conversion in embedded computing and industrial applications.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 16
- Lifecycle
- OBSOLETE
- Datasheet
- LM20154MH Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Current-mode PWM synchronous buck controller driving external FETs for flexible power design
- Wide input range: 2.95 V to 5.5 V covering 3.3 V and 5 V system supply rails
- Adjustable output voltage enabling multiple voltage rail configurations
- 16-pin SOIC package providing good thermal performance and easy layout
- Inherent cycle-by-cycle current limiting for robust overcurrent protection
Applications
The LM20154MH is used in industrial point-of-load power conversion, FPGA supply rails, and embedded processor core supplies where external FET-based power stages allow optimization for specific efficiency and current requirements. It is common in telecom equipment, server blade power modules, and embedded computing designs requiring programmable step-down conversion from a 5 V bus.
Specifications
| Pbfree Code | No |
| YTEOL | 0 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Input Voltage-Max | 5.5V |
| Input Voltage-Min | 2.95V |
| Input Voltage-Nom | 5V |
| JESD-30 Code | R-PDSO-G16 |
| Number of Functions | 1 |
| Output Current-Max | 6.6A |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP16,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, SHRINK PITCH |
| Qualification Status | Not Qualified |
| Surface Mount | YES |
| Switcher Configuration | BUCK |
| Switching Frequency-Max | 1150kHz |
| Technology | BICMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.60 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for LM20154MH:
Rochester Electronics LLC 6.6A SWITCHING REGULATOR, 1150kHz SWITCHING FREQ-MAX, PDSO16, LEAD FREE, TSSOP-16
Frequently Asked Questions
What is the difference between the LM20154MH and the LM20134MH?
Both the LM20154MH and LM20134MH are synchronous buck converters from Texas Instruments sharing the same current-mode PWM topology and input voltage range of 2.95 V to 5.5 V, and both are in 16-pin SOIC packages. The LM20154MH designation may indicate a different output current rating or feature set variant; refer to the respective Texas Instruments datasheets for precise electrical specifications and differences.
What control topology does the LM20154MH use?
The LM20154MH uses current-mode pulse width modulation (PWM) control, which provides inherent cycle-by-cycle peak current limiting, improving short-circuit protection and simplifying the compensation design. Current-mode control also improves line transient response compared to voltage-mode control, which is important for loads with widely varying current demands.
What input voltage range does the LM20154MH support?
It accepts input voltages from 2.95 V to 5.5 V with a nominal operating point of 5 V. This range is compatible with standard 3.3 V logic supply rails, single-cell regulated outputs, and 5 V system power buses common in industrial controllers, embedded computing modules, and telecom line cards.
Is the LM20154MH a lead-free RoHS compliant device?
No — the Pbfree Code for the LM20154MH is listed as No in the component database, indicating this part number variant uses tin-lead solder finish. Designers requiring a lead-free RoHS compliant version should check with Texas Instruments for a Pb-free alternate version or successor part with the appropriate JESD-609 e4 designation.
Related Guides
TPS54160DGQR Selection Guide: How to Choose a 60V Step-Down Buck Converter
Complete selection guide for the TPS54160DGQR 60V/1.5A step-down converter. Compare specs, alternatives, and sourcing options for industrial and automotive designs.
May 20, 2026
LMV932MM Dual Low-Voltage CMOS Op-Amp: Application Design Guide
Complete application design guide for the LMV932MM dual rail-to-rail CMOS op-amp: supply decoupling, RRIO design rules, stability, and recommended circuits for 1.8V–5.5V battery-powered systems.
May 20, 2026
TL084CN Equivalent and Replacements: JFET-Input Quad Op-Amp Comparison Guide
Compare TL084CN with TL074, LF347, and LM324 quad op-amps. Pin-compatible equivalents, key specs, and when to choose each for your analog design.
May 20, 2026
TPS386000RGPR Quad Voltage Supervisor: Selection and Sourcing Guide (2025)
Compare TPS386000RGPR with TPS386040RGPR, TPS3700, and TPS3823 voltage supervisors. Key specs, threshold programming, watchdog options, and sourcing tips.
May 20, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”