IS42S16160G-7TLAlternatives & Equivalent Parts
About IS42S16160G-7TL
IS42S16160G-7TL is a Integrated Circuit component manufactured by Integrated Silicon Solution Inc.. It comes in a Small Outline Packages package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for IS42S16160G-7TL — response within 24 hours.
Specification Comparison
| Parameter | IS42S16160G-7TLSource | LD1086DT50TR | LMX2592RHAT | AP7361C-33E-13 | USB-B-S-F-W-TH |
|---|---|---|---|---|---|
| Manufacturer | Integrated Silicon Solution Inc. | STMicroelectronics | Texas Instruments | Diodes Inc. | SAMTEC |
| Package Type | Small Outline Packages | Other | Quad Flat No-Lead | Other | Other |
| Pin Count | 54 | 3 | 41 | 4 | 6 |
| Temperature Range | ~ 70.0°C | — | -40.0°C ~ 85.0°C | — | -50.0°C ~ 85.0°C |
| Price | $2.4105 | $0.3900 | $17.4038 | $0.1682 | $0.2560 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | OBSOLETE | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| YTEOL | 0 | 6.2 | 15 | 8 | 7 |
| Access Mode | FOUR BANK PAGE BURST | — | — | — | — |
| Access Time-Max | 5.4 ns | — | — | — | — |
| Additional Feature | AUTO/SELF REFRESH | — | — | — | — |
| Clock Frequency-Max (fCLK) | 143 MHz | — | — | — | — |
| I/O Type | COMMON | — | — | — | — |
| Interleaved Burst Length | 1,2,4,8 | — | — | — | — |
| JESD-30 Code | R-PDSO-G54 | R-PSSO-G2 | S-PQCC-N40 | R-PDSO-G3 | — |
| Memory Density | 268435456 bit | — | — | — | — |
| Memory IC Type | SYNCHRONOUS DRAM | — | — | — | — |
| Memory Width | 16 | — | — | — | — |
| Number of Functions | 1 | 1 | 1 | 1 | — |
| Number of Ports | 1 | — | — | — | 1 |
| Number of Words | 16777216 words | — | — | — | — |
| Number of Words Code | 16000000 | — | — | — | — |
| Operating Mode | SYNCHRONOUS | — | — | — | — |
| Organization | 16MX16 | — | — | — | — |
| Output Characteristics | 3-STATE | — | — | — | — |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | — |
| Package Equivalence Code | TSOP54,.46,32 | SMSIP3H,.38,90TB | — | SOT-223 | — |
| Package Shape | RECTANGULAR | RECTANGULAR | SQUARE | RECTANGULAR | — |
| Package Style | SMALL OUTLINE, THIN PROFILE | SMALL OUTLINE | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | SMALL OUTLINE | — |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | 225 | 260 | 260 | — |
| Qualification Status | Not Qualified | Not Qualified | — | — | — |
| Refresh Cycles | 8192 | — | — | — | — |
| Self Refresh | YES | — | — | — | — |
| Sequential Burst Length | 1,2,4,8,FP | — | — | — | — |
| Standby Current-Max | 0.004 A | — | — | — | — |
| Supply Current-Max | 0.13 mA | — | — | — | — |
| Supply Voltage-Max (Vsup) | 3.6 V | — | 3.45 V | — | — |
| Supply Voltage-Min (Vsup) | 3 V | — | 3.15 V | — | — |
| Supply Voltage-Nom (Vsup) | 3.3 V | — | 3.3 V | — | — |
| Surface Mount | YES | YES | YES | YES | — |
| Technology | CMOS | BIPOLAR | — | — | — |
| Temperature Grade | COMMERCIAL | — | INDUSTRIAL | — | — |
| Terminal Form | GULL WING | GULL WING | NO LEAD | GULL WING | — |
| Terminal Pitch | 0.8 mm | 2.28 mm | 0.5 mm | 2.3 mm | — |
| Terminal Position | DUAL | SINGLE | QUAD | DUAL | — |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | — | 30 | 30 | — |
| Factory Lead Time | — | 12 Weeks | — | 12 Weeks | 1 Week |
| Adjustability | — | FIXED | — | — | — |
| Dropout Voltage1-Max | — | 1.5 V | — | 0.14 V | — |
| Dropout Voltage1-Nom | — | 1.3 V | — | 0.09 V | — |
| Input Voltage Absolute-Max | — | 30 V | — | — | — |
| Input Voltage-Max | — | 30 V | — | 6 V | — |
| Input Voltage-Min | — | 6.6 V | — | 4.3 V | — |
| JESD-609 Code | — | e3 | e4 | e3 | e3 |
| Line Regulation-Max | — | 0.01% | — | — | — |
| Load Regulation-Max | — | 0.035% | — | 0.033% | — |
| Number of Outputs | — | 1 | — | — | — |
| Operating Temperature TJ-Max | — | 125 °C | — | 150 °C | — |
| Operating Temperature TJ-Min | — | -40 °C | — | -40 °C | — |
| Output Current1-Max | — | 1.5 A | — | 1 A | — |
| Output Voltage1-Max | — | 5.1 V | — | 3.333 V | — |
| Output Voltage1-Min | — | 4.9 V | — | 3.267 V | — |
| Output Voltage1-Nom | — | 5 V | — | 3.3 V | — |
| Packing Method | — | TR | — | — | — |
| Regulator Type | — | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | — | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | — |
| Terminal Finish | — | Matte Tin (Sn) | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) | MATTE TIN | — |
| Voltage Tolerance-Max | — | 2% | — | 1% | — |
| ## LD1086DT50TR Alternates Showing results | — | Image | — | — | — |
| Pbfree Code | — | — | Yes | — | Yes |
| Analog IC - Other Type | — | — | PHASE LOCKED LOOP | — | — |
| Output Frequency-Max | — | — | 9800 MHz | — | — |
| ## LMX2592RHAT Alternates Showing results | — | — | Image | — | — |
| Board Mounting Option | — | — | — | — | RETENTION CLIPS |
| Body Breadth | — | — | — | — | 0.425 inch |
| Body Depth | — | — | — | — | 0.638 inch |
| Body Length | — | — | — | — | 0.476 inch |
| Connector Type | — | — | — | — | USB CONNECTOR |
| Contact Finish Mating | — | — | — | — | GOLD FLASH |
| Contact Finish Termination | — | — | — | — | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Contact Gender | — | — | — | — | FEMALE |
| Contact Material | — | — | — | — | NOT SPECIFIED |
| Contact Pattern | — | — | — | — | RECTANGULAR |
| Contact Style | — | — | — | — | USB B |
| DIN Conformance | — | — | — | — | NO |
| Durability | — | — | — | — | 1500 Cycles |
| Empty Shell | — | — | — | — | NO |
| Filter Feature | — | — | — | — | NO |
| IEC Conformance | — | — | — | — | NO |
| Insertion Force-Max | — | — | — | — | 1.4734 N |
| Insulator Material | — | — | — | — | HIGH TEMPERATURE THERMOPLASTIC |
| MIL Conformance | — | — | — | — | NO |
| Mixed Contacts | — | — | — | — | NO |
| Mounting Option 1 | — | — | — | — | LOCKING |
| Mounting Style | — | — | — | — | RIGHT ANGLE |
| Mounting Type | — | — | — | — | BOARD |
| Number Of Connectors | — | — | — | — | ONE |
| Number Of PCB Rows | — | — | — | — | 1 |
| Number of Rows Loaded | — | — | — | — | 2 |
| Option | — | — | — | — | GENERAL PURPOSE |
| PCB Contact Pattern | — | — | — | — | RECTANGULAR |
| Plating Thickness | — | — | — | — | FLASH inch |
| Polarization Key | — | — | — | — | POLARIZED HOUSING |
| Shell Finish | — | — | — | — | NICKEL |
| Termination Type | — | — | — | — | SOLDER |
| Total Number of Contacts | — | — | — | — | 4 |
| Withdrawl Force-Min | — | — | — | — | 1.668 N |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for IS42S16160G-7TL — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for IS42S16160G-7TL is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating IS42S16160G-7TL replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for IS42S16160G-7TL. Get expert recommendations within 24 hours.
FAQ
What is equivalent to IS42S16160G-7TL?
Known equivalents for IS42S16160G-7TL include LD1086DT50TR, LMX2592RHAT, AP7361C-33E-13. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of IS42S16160G-7TL?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify IS42S16160G-7TL alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.