INA592IDRAlternatives & Equivalent Parts
About INA592IDR
INA592IDR is a Integrated Circuit component manufactured by Texas Instruments. It comes in a Small Outline Packages package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 7 alternatives for INA592IDR — response within 24 hours.
Specification Comparison
| Parameter | INA592IDRSource | INA592IDT | TL084CD | 24AA025E64-I/SN | ERJ-L1WKF50MU | TL3AR022F | ECHU1H333GX5 | INA592IDRCT |
|---|---|---|---|---|---|---|---|---|
| Manufacturer | Texas Instruments | Texas Instruments | STMicroelectronics | Microchip | Panasonic | TE Connectivity | Panasonic | Texas Instruments |
| Package Type | Small Outline Packages | Small Outline Packages | Small Outline Packages | Small Outline Packages | Other | Resistor Chip | Other | Other |
| Pin Count | 8 | 8 | 14 | 8 | 2 | 2 | 2 | 15 |
| Temperature Range | -40.0°C ~ 125.0°C | -40.0°C ~ 125.0°C | ~ 70.0°C | -40.0°C ~ 85.0°C | — | -65.0°C ~ 170.0°C | -55.0°C ~ 125.0°C | -40.0°C ~ 125.0°C |
| Price | $1.9340 | $2.2700 | $0.1234 | $0.2869 | $0.5000 | $0.8177 | $0.1677 | $2.3240 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE | — | OBSOLETE | ACTIVE | ACTIVE |
| Electrical Parameters | ||||||||
| Pbfree Code | Yes | Yes | — | — | — | Yes | Yes | Yes |
| Date Of Intro | 2020-12-05 | — | — | — | — | — | — | — |
| YTEOL | 15 | 15 | 4.15 | 13 | — | 0 | 5.83 | 15 |
| Amplifier Type | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | OPERATIONAL AMPLIFIER | — | — | — | — | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | VOLTAGE-FEEDBACK | — | — | — | — | VOLTAGE-FEEDBACK |
| Bandwidth (3dB)-Nom | 0.8 MHz | 0.8 MHz | — | — | — | — | — | 0.8 MHz |
| Common-mode Reject Ratio-Min | 88 dB | 88 dB | 70 dB | — | — | — | — | 88 dB |
| Common-mode Reject Ratio-Nom | 84 dB | 84 dB | 86 dB | — | — | — | — | 84 dB |
| Frequency Compensation | NO | NO | YES | — | — | — | — | NO |
| Input Offset Voltage-Max | 40 µV | 40 µV | 13000 µV | — | — | — | — | 40 µV |
| JESD-30 Code | R-PDSO-G8 | R-PDSO-G8 | R-PDSO-G14 | R-PDSO-G8 | — | — | — | S-PDSO-N10 |
| JESD-609 Code | e4 | e4 | e4 | e3 | — | — | e1 | e4 |
| Low-Bias | NO | NO | YES | — | — | — | — | NO |
| Low-Offset | NO | NO | NO | — | — | — | — | NO |
| Micropower | NO | NO | NO | — | — | — | — | NO |
| Neg Supply Voltage Limit-Max | -18 V | -18 V | -18 V | — | — | — | — | -18 V |
| Neg Supply Voltage-Nom (Vsup) | -15 V | -15 V | -15 V | — | — | — | — | -15 V |
| Number of Functions | 1 | 1 | 14 | 1 | — | — | — | 1 |
| Package Body Material | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY | — | — | — | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 | SOP8,.25 | SOP14,.25 | SOP8,.23 | — | — | — | — |
| Package Shape | RECTANGULAR | RECTANGULAR | RECTANGULAR | RECTANGULAR | — | RECTANGULAR PACKAGE | RECTANGULAR PACKAGE | SQUARE |
| Package Style | SMALL OUT LINE | SMALL OUT LINE | SMALL OUTLINE | SMALL OUTLINE | — | SMT | SMT | SMALL OUTLINE, VERY THIN PROFILE |
| Packing Method | TR, 13 INCH | TR, 7 INCH | TUBE | — | — | TR | TR, EMBOSSED, 13 INCH | TR |
| Peak Reflow Temperature (Cel) | 260 | 260 | 260 | 260 | — | — | — | 260 |
| Power | NO | NO | NO | — | — | — | — | NO |
| Programmable Power | NO | NO | NO | — | — | — | — | NO |
| Slew Rate-Nom | 18 V/us | 18 V/us | 16 V/us | — | — | — | — | 18 V/us |
| Supply Current-Max | 1.5 mA | 1.5 mA | 10 mA | 0.003 mA | — | — | — | 1.5 mA |
| Supply Voltage Limit-Max | 18 V | 18 V | 18 V | — | — | — | — | 18 V |
| Supply Voltage-Nom (Vsup) | 15 V | 15 V | 15 V | 5 V | — | — | — | 15 V |
| Surface Mount | YES | YES | YES | YES | — | YES | YES | YES |
| Technology | CMOS | CMOS | BIPOLAR | CMOS | — | METAL FOIL | — | CMOS |
| Temperature Grade | AUTOMOTIVE | AUTOMOTIVE | COMMERCIAL | INDUSTRIAL | — | — | — | AUTOMOTIVE |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | — | — | Tin/Silver/Copper (Sn/Ag/Cu) | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | GULL WING | GULL WING | GULL WING | GULL WING | — | — | — | NO LEAD |
| Terminal Pitch | 1.27 mm | 1.27 mm | 1.27 mm | 1.27 mm | — | — | — | 0.5 mm |
| Terminal Position | DUAL | DUAL | DUAL | DUAL | — | — | — | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 | 30 | 30 | — | — | — | — | 30 |
| Unity Gain BW-Nom | 2000 | 2000 | 4000 | — | — | — | — | 2000 |
| Voltage Gain-Max | 2 | 2 | — | — | — | — | — | 2 |
| Voltage Gain-Min | 0.5 | 0.5 | 25000 | — | — | — | — | 0.5 |
| Wideband | NO | NO | NO | — | — | — | — | NO |
| ## INA592IDR Alternates Showing results | Image | — | — | — | — | — | — | — |
| ## INA592IDT Alternates Showing results | — | Image | — | — | — | — | — | — |
| Average Bias Current-Max (IIB) | — | — | 0.02 µA | — | — | — | — | — |
| Bias Current-Max (IIB) @25C | — | — | 0.0002 µA | — | — | — | — | — |
| Input Offset Current-Max (IIO) | — | — | 0.004 µA | — | — | — | — | — |
| Qualification Status | — | — | Not Qualified | Not Qualified | — | — | — | — |
| Slew Rate-Min | — | — | 8 V/us | — | — | — | — | — |
| ## TL084CD Alternates Showing results | — | — | Image | — | — | — | — | — |
| Manufacturer Package Code | — | — | — | SOIC-8 | — | — | — | — |
| Factory Lead Time | — | — | — | 6 Weeks | — | 114 Weeks, 2 Days | 20 Weeks | — |
| Additional Feature | — | — | — | ALSO OPERATES AT 1.7V TO 2.5V @0.1MHZ | — | — | — | — |
| Clock Frequency-Max (fCLK) | — | — | — | 0.4 MHz | — | — | — | — |
| Data Retention Time-Min | — | — | — | 200 | — | — | — | — |
| Endurance | — | — | — | 1000000 Write/Erase Cycles | — | — | — | — |
| I2C Control Byte | — | — | — | 1010DDDR | — | — | — | — |
| Memory Density | — | — | — | 2048 bit | — | — | — | — |
| Memory IC Type | — | — | — | EEPROM | — | — | — | — |
| Memory Width | — | — | — | 8 | — | — | — | — |
| Number of Ports | — | — | — | 1 | — | — | — | — |
| Number of Words | — | — | — | 256 words | — | — | — | — |
| Number of Words Code | — | — | — | 256 | — | — | — | — |
| Operating Mode | — | — | — | SYNCHRONOUS | — | — | — | — |
| Organization | — | — | — | 256X8 | — | — | — | — |
| Output Characteristics | — | — | — | OPEN-DRAIN | — | — | — | — |
| Parallel/Serial | — | — | — | SERIAL | — | — | — | — |
| Programming Voltage | — | — | — | 5 V | — | — | — | — |
| Screening Level | — | — | — | TS 16949 | — | — | — | — |
| Serial Bus Type | — | — | — | I2C | — | — | — | — |
| Standby Current-Max | — | — | — | 0.000001 A | — | — | — | — |
| Supply Voltage-Max (Vsup) | — | — | — | 5.5 V | — | — | — | — |
| Supply Voltage-Min (Vsup) | — | — | — | 2.5 V | — | — | — | — |
| Write Cycle Time-Max (tWC) | — | — | — | 5 ms | — | — | — | — |
| Write Protection | — | — | — | HARDWARE | — | — | — | — |
| Reach Compliance Code | — | — | — | — | — | Compliant | Compliant | — |
| Construction | — | — | — | — | — | Fully Welded | — | — |
| Mounting Feature | — | — | — | — | — | SURFACE MOUNT | SURFACE MOUNT | — |
| Package Height | — | — | — | — | — | 0.6 mm | — | — |
| Package Length | — | — | — | — | — | 6.4 mm | — | — |
| Package Width | — | — | — | — | — | 3.2 mm | — | — |
| Rated Power Dissipation (P) | — | — | — | — | — | 1 W | — | — |
| Resistance | — | — | — | — | — | 0.022 Ω | — | — |
| Resistor Type | — | — | — | — | — | FIXED RESISTOR | — | — |
| Size Code | — | — | — | — | — | 2512 | 1202 | — |
| Temperature Coefficient | — | — | — | — | — | 75 ppm/°C | — | — |
| Terminal Shape | — | — | — | — | — | WRAPAROUND | WRAPAROUND | — |
| Tolerance | — | — | — | — | — | 1% | — | — |
| Capacitance | — | — | — | — | — | — | 0.033 µF | — |
| Capacitor Type | — | — | — | — | — | — | FILM CAPACITOR | — |
| Dielectric Material | — | — | — | — | — | — | PLASTIC | — |
| Height | — | — | — | — | — | — | 2.1 mm | — |
| Negative Tolerance | — | — | — | — | — | — | 2% | — |
| Positive Tolerance | — | — | — | — | — | — | 2% | — |
| Rated (DC) Voltage (URdc) | — | — | — | — | — | — | 50 V | — |
| Reference Standard | — | — | — | — | — | — | CSA; ENEC; UL | — |
| Tan Delta | — | — | — | — | — | — | 0.6 | — |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 7 alternatives for INA592IDR — response within 24 hours.
Quick Links
Amplifier, 1 Func, 40uV Offset-Max, 0.8MHz Band Width, CMOS, PDSO8
suggested
suggested
suggested
Operational Amplifier, 1 Func, 40uV Offset-Max, 0.8MHz Band Width, CMOS, PDSO10
Why Look for Alternatives?
Finding alternatives for INA592IDR is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating INA592IDR replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for INA592IDR. Get expert recommendations within 24 hours.
FAQ
What is equivalent to INA592IDR?
Known equivalents for INA592IDR include INA592IDT, TL084CD, 24AA025E64-I/SN. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of INA592IDR?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify INA592IDR alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.