IL-AG5-30P-D3L2 JAE Electronics Connector (Other) In Stock
JAE Electronics IL-AG5-30P-D3L2 is a 30-position 2.5 mm pitch right-angle pin header board-to-cable connector with integrated mechanical locking latch. Designed for reliable wire harness connections, it provides secure cable retention in automotive electronics, industrial control panels, and consumer appliance wiring applications. The 2.5 mm pitch supports moderate current-carrying contacts in a compact housing footprint.
- Manufacturer
- JAE Electronics
- Package
- Other
- Pin Count
- 32
- Lifecycle
- ACTIVE
- Datasheet
- IL-AG5-30P-D3L2 Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 30-position right-angle configuration on 2.5 mm pitch for dense, accessible board-to-cable wiring harness connections
- Integrated mechanical locking latch ensures secure cable retention and prevents accidental disconnection under vibration or cable tension
- 2.5 mm contact pitch supports current-carrying contacts rated for 3 A per pin in wire harness power-and-signal applications
- Right-angle pin header orientation allows cable exit parallel to the PCB, enabling compact chassis-mounted installations
Applications
The IL-AG5-30P-D3L2 is designed for board-to-cable wiring harness applications in automotive body electronics, industrial control panels, and home appliances where 30-position connectors with mechanical locking are required for reliable field connections. The 2.5 mm pitch supports per-pin currents up to 3 A, making it suitable for mixed signal-and-power harnesses carrying both control signals and low-voltage power within the same connector. The right-angle orientation and integrated latch are particularly valuable in sealed enclosure designs where cables must route parallel to the PCB surface and must not be inadvertently disconnected during maintenance or vibration.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many contact positions does the IL-AG5-30P-D3L2 provide, and what is the contact pitch spacing?
The IL-AG5-30P-D3L2 features 30 contact positions on a 2.5 mm pitch, resulting in a connector body width of approximately 75 mm across the 30 contacts. This combination of 30 pins at 2.5 mm pitch is widely used in automotive wiring harnesses and industrial control panels where a moderate-density interconnect is needed for mixed power-and-signal bundles carrying up to 3 A per pin.
How does the mechanical locking latch on the IL-AG5-30P-D3L2 protect against accidental disconnection in vibration-prone environments?
The IL-AG5-30P-D3L2's mechanical lock is a snap-fit latch that engages audibly when the cable connector seats fully, providing a positive retention force that resists axial pull-out forces typically exceeding 20 N. This locking mechanism is critical in automotive and industrial environments where vibration at frequencies from 10 Hz to 500 Hz can cause unlocked connectors to gradually back out, leading to intermittent signal faults or power interruptions in 30-pin control harnesses.
For which automotive or industrial wiring harness applications is the IL-AG5-30P-D3L2 most commonly specified?
The IL-AG5-30P-D3L2 is commonly specified for automotive body control modules (BCMs) managing 30 or more door, lighting, or HVAC actuator signals at voltages of 5 V to 12 V, industrial servo drive I/O harnesses connecting encoder feedback and digital I/O at signal voltages up to 24 V, and home appliance control boards interfacing motor drives with sensor assemblies using 2.5 mm pitch wiring. The 2.5 mm pitch and 3 A per-contact rating accommodate both logic-level signals and 12 V actuator drive currents in the same 30-pin harness.
How does the right-angle orientation of the IL-AG5-30P-D3L2 compare to vertical pin header variants for chassis installation?
The right-angle orientation of the IL-AG5-30P-D3L2 routes the mating cable harness parallel to the PCB surface, reducing the vertical clearance requirement above the connector from approximately 30 mm (vertical header plus cable bend radius) to less than 15 mm. This is essential in shallow enclosure designs with lid-to-PCB clearances of 20 mm or less, such as automotive ECUs mounted under dashboard panels or industrial control modules with DIN rail housing depths under 60 mm.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About JAE Electronics
JAE Electronics is a leading electronic component manufacturer. FindMyChip sources JAE Electronics ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”