HMC832ALP6GE Analog Devices Integrated Circuit (Quad Flat No-Lead) In Stock

Analog Devices HMC832ALP6GE is a wideband fractional-N PLL with integrated VCO covering 25 MHz to 3 GHz output frequency range with ultra-low phase noise, housed in a compact 40-pin LFCSP package. Features integrated loop filter and SPI programming for rapid frequency synthesis in RF systems. Available from authorized distributors worldwide with competitive pricing for communications and test equipment designs.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
HMC832ALP6GEQuad Flat No-Lead
Quick Facts
Manufacturer
Analog Devices
Package
Quad Flat No-Lead
Pin Count
40
Lifecycle
OBSOLETE
Category
Integrated Circuit
Price
From $6.1715(MOQ 29)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Wideband VCO covers 25 MHz to 3 GHz output range in a single IC, eliminating external VCO components and reducing BOM complexity
  • Ultra-low phase noise fractional-N PLL architecture enables high-spectral-purity local oscillators for demanding RF receiver and transmitter designs
  • SPI-programmable registers allow dynamic frequency hopping and real-time loop filter adjustment, supporting agile frequency synthesizer applications
  • 40-pin LFCSP (6x6 mm) with exposed heat slug enables excellent thermal management at elevated RF power levels without external heat spreaders

Applications

The HMC832ALP6GE is ideal for wireless infrastructure base stations, point-to-point microwave links, and software-defined radio platforms that require a low-noise, agile frequency synthesizer from 25 MHz to 3 GHz. Its integrated VCO and fractional-N PLL in a single compact LFCSP package simplify RF board design for satellite communication modems and radar front-ends. Test and measurement equipment such as signal generators and spectrum analyzers also benefit from its wide tuning range and low spurious output.

Specifications

Pbfree CodeNo
Manufacturer Package CodeHCP-40-1
YTEOL0
JESD-30 CodeS-XQCC-N40
JESD-609 Codee3
Number of Functions1
Package Body MaterialUNSPECIFIED
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Supply Voltage-Nom3.3V
Surface MountYES
Telecom IC TypeRF AND BASEBAND CIRCUIT
Temperature GradeINDUSTRIAL
Terminal FinishTin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.5mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)30
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginSouth Korea

Datasheet

HMC832ALP6GE Datasheet Download

Official datasheet from Analog Devices

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for HMC832ALP6GE:

Frequently Asked Questions

What output frequency range does HMC832ALP6GE cover and how is it programmed for specific channels?

The HMC832ALP6GE integrates a VCO and fractional-N PLL that covers an output frequency range of approximately 25 MHz to 3 GHz. Frequency is set via a 3-wire SPI interface by writing to internal divider and register values, allowing sub-Hz frequency resolution in fractional-N mode. This makes it possible to program exact LO frequencies for cellular, ISM, and satellite bands without changing external components.

How does the HMC832ALP6GE phase noise performance compare with discrete VCO plus PLL implementations?

The HMC832ALP6GE achieves integrated phase noise performance suitable for direct use as a local oscillator in LTE and microwave backhaul systems, with typical phase noise on the order of -100 dBc/Hz at 10 kHz offset at 2.4 GHz. Integrating the VCO on-chip eliminates parasitic discontinuities from PCB traces between a discrete VCO and PLL IC, which often adds 3 to 6 dB of excess phase noise in discrete implementations. The on-chip loop filter option further reduces external component sensitivity.

For an SDR platform operating below 500 MHz, does HMC832ALP6GE support that range directly?

Yes, the HMC832ALP6GE supports output frequencies starting from 25 MHz, so it can synthesize LO signals across HF, VHF, and UHF bands below 500 MHz without external frequency dividers. The fractional-N divider allows fine channel spacing in the sub-500 MHz range, making it compatible with LO generation for AM/FM broadcast receivers, PMR446, and TETRA radio front-ends. SPI control enables rapid channel switching times well below 1 ms.

What thermal and package considerations apply when soldering HMC832ALP6GE in a high-frequency PCB layout?

The HMC832ALP6GE is supplied in a 40-pin LFCSP (6x6 mm) with an exposed thermal pad (slug) on the bottom. Reflow peak temperature is 260°C, compatible with standard lead-free SAC305 solder paste profiles. The thermal slug must be soldered to a grounded copper pour with multiple vias to the inner ground plane to both dissipate heat from the RF circuitry and provide low-inductance RF ground return, which is critical for phase noise performance at 3 GHz.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $6.1715
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
29+$7.1210$206.51
37+$6.8836$254.69
49+$6.1715$302.40
pcs
Unit price: $7.1210 · Total: $206.51

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea