G3VM-61FR1 Omron Electronics Relay or Contactor (Small Outline Packages) In Stock
Omron G3VM-61FR1 is a MOSFET relay in a DIP-8 package with SPST-NO (normally open) configuration, rated for up to 60 V load voltage and 5 A continuous load current. It provides optically isolated solid-state switching for industrial control, test equipment, and signal multiplexing applications requiring silent, bounce-free operation.
- Manufacturer
- Omron Electronics
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- G3VM-61FR1 Datasheet PDF
- Category
- Relay or Contactor
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- SPST-NO MOSFET relay rated at 60 V load voltage and 5 A continuous current
- Optical isolation between input and output for noise-free signal control
- DIP-8 package with surface-mounting terminals for flexible PCB integration
- Solid-state design with no moving parts for extended cycle life beyond mechanical relays
- Low on-resistance enabling efficient power switching with minimal voltage drop
Applications
The G3VM-61FR1 is used in industrial automation, programmable logic controller (PLC) I/O modules, and automated test equipment (ATE) where silent, high-cycle solid-state switching at up to 60 V and 5 A is required. Its optical isolation makes it well suited for signal multiplexers, motor drive enable circuits, and medical equipment that must maintain galvanic separation between control logic and load circuits.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for G3VM-61FR1:
suggested
suggested
Frequently Asked Questions
What are the maximum load voltage and continuous current ratings of the G3VM-61FR1 MOSFET relay?
The G3VM-61FR1 is rated for a maximum load voltage of 60 V and a continuous load current of 5 A. These ratings make it suitable for switching DC or AC loads in industrial control circuits, sensor signal paths, and motor enable circuits operating below 60 V.
How does the optical isolation in the G3VM-61FR1 protect control circuitry from load-side transients?
The G3VM-61FR1 uses an LED-photodetector optical isolation barrier between the input control signal and the MOSFET output stage. This galvanic separation prevents load-side voltage spikes of up to 60 V from coupling back into the low-voltage control logic, protecting microcontrollers or PLCs connected to the input side.
In what package does the G3VM-61FR1 come, and does it support both through-hole and surface-mount assembly?
The G3VM-61FR1 is housed in a DIP-8 package with surface-mounting terminals, which means it can be used in surface mount assembly processes despite the DIP outline. The 8-pin dual in-line body provides 4 input and 4 output pin connections, maintaining standard DIP-8 pin spacing for easy PCB footprint integration.
When would an engineer choose the G3VM-61FR1 over a traditional electromechanical relay for a 5 A switching application?
Designers choose the G3VM-61FR1 when the application requires more than 1 million switching cycles, silent operation without contact bounce, or switching speeds below 1 ms that mechanical relays cannot reliably achieve. The solid-state MOSFET output also eliminates the coil current draw of electromechanical alternatives, reducing power consumption in high-channel-count relay arrays.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Omron Electronics
Omron Electronics is a leading electronic component manufacturer. FindMyChip sources Omron Electronics ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”