FT2232HL-TRAY FTDI Chip Integrated Circuit (Quad Flat Packages) In Stock
FTDI FT2232HL-TRAY is a dual-channel USB 2.0 Hi-Speed to serial/JTAG/SPI/I2C bridge controller IC in a 64-pin LQFP package. It supports USB High Speed (480 Mbps) and Full Speed (12 Mbps) modes, enabling flexible multi-protocol interface bridging for embedded development tools and industrial equipment.
- Manufacturer
- FTDI Chip
- Package
- Quad Flat Packages
- Pin Count
- 64
- Lifecycle
- ACTIVE
- Datasheet
- FT2232HL-TRAY Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $4.3125(MOQ 1)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual-channel USB 2.0 Hi-Speed (480 Mbps) bridge supporting UART, JTAG, SPI, I2C, and bit-bang protocols simultaneously
- USB Hi-Speed and Full-Speed (12 Mbps) operation with FTDI's integrated USB engine, eliminating firmware USB stack complexity
- 64-pin LQFP package with flexible MPSSE (Multi-Protocol Synchronous Serial Engine) for clock-synchronous serial interfaces up to 30 MHz
- RoHS-compliant, Pb-free construction with peak reflow rating at 260°C for standard lead-free SMT assembly
Applications
The FT2232HL-TRAY is widely used in JTAG debuggers, USB-to-UART bridges, SPI flash programmers, and I2C bus analyzers where dual-channel USB 2.0 Hi-Speed at 480 Mbps is required for fast firmware programming and protocol analysis. It is a standard component in embedded development tools, logic analyzers, and industrial USB communication adapters needing simultaneous multi-protocol serial interfacing from a single USB connection.
Specifications
| Pbfree Code | Yes |
| YTEOL | 6 |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| uPs/uCs/Peripheral ICs Type | BUS CONTROLLER, UNIVERSAL SERIAL BUS |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | EAR99 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Mainland China |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for FT2232HL-TRAY:
suggested
suggested
suggested
suggested
Frequently Asked Questions
What USB speed modes and serial protocols does the FT2232HL-TRAY support?
The FT2232HL-TRAY supports USB 2.0 Hi-Speed (480 Mbps) and Full-Speed (12 Mbps) operation, with dual independent channels each capable of UART, JTAG, SPI, I2C, bit-bang, and MPSSE (Multi-Protocol Synchronous Serial Engine) modes. Each channel can run a different protocol simultaneously, enabling a single chip to act as both a JTAG programmer and a UART console at up to 480 Mbps aggregate USB throughput.
For a USB JTAG debugger design, what clock rates can the FT2232HL-TRAY's MPSSE engine achieve?
The FT2232HL-TRAY's MPSSE (Multi-Protocol Synchronous Serial Engine) supports synchronous serial clock rates up to 30 MHz on both channels, making it suitable for high-speed JTAG debugging and SPI flash programming. At 480 Mbps USB Hi-Speed, the effective bulk data throughput to the host PC can reach several megabytes per second, significantly accelerating firmware download and boundary scan operations compared to Full-Speed USB JTAG adapters.
How does the FT2232HL-TRAY's dual-channel architecture benefit embedded development tool designs?
The FT2232HL-TRAY provides 2 fully independent USB serial channels in a single 64-pin LQFP IC, allowing one channel to handle JTAG debugging while the second simultaneously manages a UART console or SPI interface. This eliminates the need for two separate USB bridge chips in development adapters, reducing BOM cost and PCB area while maintaining independent 480 Mbps USB Hi-Speed connectivity for each channel.
What packaging form does FT2232HL-TRAY supply in, and how does tray packaging affect procurement planning?
FT2232HL-TRAY is supplied in IC trays rather than tape-and-reel, with each tray holding a fixed quantity of 64-pin LQFP devices suitable for automated SMT placement at peak reflow temperatures up to 260°C. Tray packaging is common for medium-volume orders and prototype production runs; engineers ordering for high-volume continuous SMT lines should confirm tray quantity per order to plan feeder changeovers, as tray-based feeding requires more frequent replenishment than tape-and-reel supply.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About FTDI Chip
FTDI Chip is a leading electronic component manufacturer. FindMyChip sources FTDI Chip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $5.3000 | $5.30 |
| 10+ | $5.0900 | $50.90 |
| 100+ | $4.8900 | $489.00 |
| 250+ | $4.6800 | $1170.01 |
| 500+ | $4.4200 | $2210.00 |
| 1000+ | $4.3125 | $4312.50 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”