EXB-18V472JX Panasonic Resistor Network (Other) In Stock

Panasonic EXB-18V472JX is a 4-element chip resistor array in a 0502 SMD package with 4.7kΩ per element and ±5% tolerance. Compact array reduces board space versus discrete resistors. Available from stock with worldwide shipping.

ACTIVEResistor NetworkVerified Jun 2026
Package / Visual Reference
EXB-18V472JXOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
8
Lifecycle
ACTIVE
Category
Resistor Network
Price
From $0.0451(MOQ 500)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of EXB-18V472JX?

  • 4-element resistor array integrating 4 independent 4.7kΩ resistors in a single 0502 package
  • ±5% tolerance on all 4 elements providing cost-effective general-purpose resistor banks
  • Compact 0502 footprint saving up to 75% board space compared to 4 discrete 0402 resistors
  • Chip array construction ensuring matched temperature tracking between all 4 elements
  • Surface mount design compatible with automated pick-and-place and reflow soldering
  • RoHS compliant Pb-free construction meeting modern environmental standards

What is EXB-18V472JX used for?

The EXB-18V472JX is a 4-element 4.7kΩ resistor array ideal for pull-up and pull-down networks on multi-bit data buses, I2C/SPI signal lines, and GPIO port banks in microcontroller and FPGA designs where 4 identical resistors are needed in a minimal footprint. Its single 0502 package replaces 4 individual resistors, reducing component count, simplifying BOM management, and improving PCB assembly throughput in high-density boards. It is also commonly used in LED indicator arrays and push-button matrix circuits where uniform current limiting across multiple channels is required.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the EXB-18V472JX datasheet?

EXB-18V472JX Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for EXB-18V472JX?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many resistor elements does the EXB-18V472JX contain and what is the resistance per element?

The EXB-18V472JX contains 4 independent resistor elements, each with a 4.7kΩ nominal resistance at ±5% tolerance. All 4 elements share a single 0502 chip package, allowing designers to replace 4 discrete pull-up resistors with 1 component, reducing total part count and simplifying placement in tight PCB layouts with high component density.

What board space savings does EXB-18V472JX offer compared to using 4 discrete 0402 resistors?

Four individual 0402 resistors each occupy approximately 1.0mm x 0.5mm, totaling roughly 2mm² of board area plus spacing. The EXB-18V472JX 0502 package consolidates all 4 elements into a single footprint of approximately 1.25mm x 0.65mm, achieving a board area reduction of up to 70-75% while also cutting the number of solder joints from 8 to 4, improving assembly reliability.

Is EXB-18V472JX suitable for I2C bus pull-up resistor applications at 3.3V or 5V?

Yes, the 4.7kΩ per element value is the standard recommended pull-up resistance for I2C buses operating in fast mode (400kHz) at both 3.3V and 5V supply rails, as specified in the I2C specification for bus capacitance up to 100pF. Using the EXB-18V472JX array, both SDA and SCL lines of two I2C buses can be pulled up simultaneously using a single component with 4 elements.

How does the matched element construction of EXB-18V472JX benefit multi-channel LED indicator circuits?

Resistor arrays manufactured on a single substrate exhibit closely matched resistance and temperature tracking between elements, typically achieving ±1% relative element-to-element matching even within a ±5% absolute tolerance band. For LED indicator circuits where 4 LEDs must display uniform brightness, this matching means forward current variation between channels stays well below 5%, avoiding visible brightness differences that could appear when using 4 individual resistors with independent 5% tolerances.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0451
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
500+$0.0809$40.47
1000+$0.0630$63.00
2700+$0.0607$163.89
5000+$0.0593$296.65
10000+$0.0460$460.00
20000+$0.0451$902.00
pcs
Unit price: $0.0809 · Total: $40.47

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK