ERJT14J302U Panasonic Resistor (Other) In Stock

Panasonic ERJT14J302U is a thick film SMD resistor in 1210 case with 3 kΩ resistance, ±5% tolerance, 0.5 W power rating, and ±200 ppm/°C temperature coefficient. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT14J302UOther
Quick Facts
Manufacturer
Panasonic
Package
Other
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.1080(MOQ 5000)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT14J302U?

  • 3 kΩ resistance with ±5% tolerance in 1210 SMD package for higher-power signal applications
  • 0.5 W power rating enabling use in moderate dissipation circuit nodes
  • ±200 ppm/°C TCR for predictable resistance drift from -40°C to +125°C
  • Rectangular 3.2×2.5×0.6 mm form factor for reliable automated SMT placement
  • RoHS-compliant and REACH-compliant Pb-free thick film resistor

What is ERJT14J302U used for?

The ERJT14J302U is used in voltage dividers, transistor biasing networks, and feedback resistors in op-amp circuits where a 3 kΩ resistance and 0.5 W dissipation capability are needed. Its 1210 package suits industrial PCBs requiring stronger solder joints than smaller 0805 or 0603 packages can provide. The component also serves as a pull-up resistor on open-drain output lines in 5 V and 12 V systems where moderate source impedance is acceptable.

What are the specifications of ERJT14J302U?

Pbfree CodeYes
Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width2.5mm
Packing MethodTR, EMBOSSED, 7 INCH
Rated Power Dissipation (P)0.5W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance3000Ω
Resistor TypeFIXED RESISTOR
Size Code1210
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTIN
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT14J302U datasheet?

ERJT14J302U Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT14J302U?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What maximum current can the ERJT14J302U carry continuously without exceeding its 0.5 W rating?

At 3 kΩ and 0.5 W power rating, the ERJT14J302U can carry up to approximately 12.9 mA continuously. This is sufficient for most pull-up and bias resistor applications on 3.3 V, 5 V, or even 12 V logic lines while maintaining comfortable thermal margins at ambient temperatures up to +70°C.

For a 5 V pull-up on an open-drain output, how does 3 kΩ from the ERJT14J302U affect signal rise time?

A 3 kΩ pull-up from 5 V charges a typical 100 pF bus capacitance with a time constant of 300 ns, yielding a rise time of roughly 660 ns to 90% of supply. This is suitable for communication speeds up to about 500 kHz; for faster I2C or SMBus at 1 MHz, a lower-value resistor such as 1 kΩ or 820 Ω would be preferred instead.

How does the ERJT14J302U 1210 package improve reliability in high-vibration industrial enclosures compared to 0805 alternatives?

The 1210 package (3.2×2.5 mm) provides approximately 2.5 times the solder pad area of an 0805 (2.0×1.25 mm), significantly increasing joint shear strength and resistance to mechanical vibration and thermal cycling fatigue. For industrial motor drives and control panels rated to IEC 60068-2-6 vibration levels, the ERJT14J302U in 1210 offers meaningfully longer field service life than a smaller-packaged 3 kΩ equivalent.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.1080
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
5000+$0.1200$600.00
25000+$0.1140$2850.00
50000+$0.1080$5400.00
pcs
Unit price: $0.1200 · Total: $600.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK