ERJT08J912V Panasonic Resistor (Resistor Chip) In Stock

ERJT08J912V is a Panasonic thick film SMD resistor in 1206 package with 9.1 kΩ resistance, ±5% tolerance, and 0.33 W power rating for signal conditioning and biasing circuits. Temperature coefficient is ±200 ppm/°C. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J912VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0490(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J912V?

  • 9.1 kΩ resistance in a compact 1206 package (3.2 mm × 1.6 mm × 0.6 mm) for versatile circuit use
  • 0.33 W power rating enabling continuous current of up to 6 mA at 9.1 kΩ
  • ±5% tolerance suitable for pull-up networks, voltage dividers, and analog biasing applications
  • ±200 ppm/°C temperature coefficient delivering stable resistance across commercial and industrial ranges
  • REACH/RoHS compliant construction for global environmental regulatory compliance
  • Rectangular thick film SMT design with broad compatibility for automated pick-and-place assembly

What is ERJT08J912V used for?

The ERJT08J912V is commonly deployed as a pull-up or pull-down resistor in digital logic interfaces, reset lines, and open-drain bus systems such as I2C operating at 3.3 V or 5 V. Its 9.1 kΩ value and 0.33 W rating make it reliable in voltage divider networks for analog sensor outputs, ADC reference scaling, and microcontroller GPIO biasing. The 1206 package provides ease of inspection and rework compared to smaller 0402 or 0603 alternatives.

What are the specifications of ERJT08J912V?

Reach Compliance CodeCompliant
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.33W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance9100Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTin (Sn)
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT08J912V datasheet?

ERJT08J912V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J912V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How does the 9.1 kΩ ERJT08J912V perform as a pull-up resistor on a 3.3 V I2C bus?

On a 3.3 V I2C bus, the 9.1 kΩ ERJT08J912V pulls the SDA or SCL line high with approximately 363 µA of current when idle. This is within the standard I2C specification of 3 mA max sink current and keeps power draw minimal. The resistor dissipates only 1.2 mW under these conditions, far below its 0.33 W rated limit.

What voltage divider output does ERJT08J912V produce when paired with a 10 kΩ resistor from a 5 V rail?

Pairing the 9.1 kΩ ERJT08J912V with a 10 kΩ resistor in a voltage divider from 5 V gives an output of approximately 2.44 V (V = 5 × 10k / (9.1k + 10k)). Total quiescent current through the divider is about 262 µA, dissipating 0.65 mW in the ERJT08J912V — well within its 0.33 W power limit for an ADC reference or threshold circuit.

When is the 1206 package of ERJT08J912V preferable to a 0402 or 0603 version in production PCB design?

The 1206 package (3.2 mm × 1.6 mm) of ERJT08J912V is preferred when manual inspection, rework, or hand-soldering is required, as the larger pads are easier to handle than 0402 (1 mm × 0.5 mm) footprints. It also offers 0.33 W thermal capacity versus the typical 0.1 W of 0402 resistors, giving more headroom for 9.1 kΩ resistors in circuits with intermittent or pulsed higher currents.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0490
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0500$2.50
500+$0.0490$24.50
pcs
Unit price: $0.0500 · Total: $2.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK