ERJT08J682V Panasonic Resistor (Resistor Chip) In Stock

Panasonic ERJT08J682V is a thick film surface mount resistor with 6.8kΩ ±5% resistance and 0.33W power rating in a 1206 SMD package. Features ±200ppm/°C TCR and REACH compliant construction. Available from stock with worldwide shipping.

ACTIVEResistorVerified Jun 2026
Package / Visual Reference
ERJT08J682VResistor Chip
Quick Facts
Manufacturer
Panasonic
Package
Resistor Chip
Pin Count
2
Lifecycle
ACTIVE
Category
Resistor
Price
From $0.0270(MOQ 50)
Temp Range
-55.0°C to 155.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ERJT08J682V?

  • 6.8kΩ resistance with ±5% tolerance in Panasonic ERJT08 thick film 1206 series
  • 0.33W power dissipation in a 1206 package: 3.2 mm length × 0.6 mm height
  • Temperature coefficient of ±200 ppm/°C for reliable performance across typical operating temperature ranges
  • REACH compliant with JESD-609 e3 moisture sensitivity rating for global regulatory approval
  • Surface mount construction for automated SMT reflow assembly in high-volume production

What is ERJT08J682V used for?

The ERJT08J682V 6.8kΩ resistor is used in pull-up and pull-down networks, voltage dividers, and feedback bias circuits in microcontroller-based systems, sensor interfaces, and industrial control equipment. Its 0.33W rating in the 1206 package provides thermal headroom for higher-voltage bias networks and open-drain pull-up circuits operating from 12V or 24V rails. Designers also use it in RC timing networks and input protection circuits where a high-value series resistor limits fault current.

What are the specifications of ERJT08J682V?

Reach Compliance CodeCompliant
Factory Lead Time22Weeks
YTEOL12
ConstructionRectangular
JESD-609 Codee3
Mounting FeatureSURFACE MOUNT
Package Height0.6mm
Package Length3.2mm
Package ShapeRECTANGULAR PACKAGE
Package StyleSMT
Package Width1.6mm
Packing MethodTR, PUNCHED, 7 INCH
Rated Power Dissipation (P)0.33W
Rated Temperature70°C
Reference StandardAEC-Q200, IEC60115-8
Resistance6800Ω
Resistor TypeFIXED RESISTOR
Size Code1206
Surface MountYES
TechnologyMETAL GLAZE/THICK FILM
Temperature Coefficient200ppm/°C
Terminal FinishTin (Sn)
Terminal ShapeWRAPAROUND
Tolerance5%
Working Voltage200V
PackageResistor Chip

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8533.21.00.30
Country of OriginJapan

Where can I find the ERJT08J682V datasheet?

ERJT08J682V Datasheet Download

Official datasheet from Panasonic

What are equivalent replacements for ERJT08J682V?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How much idle current does a 6.8kΩ pull-up to 3.3V draw in a GPIO circuit using ERJT08J682V?

With the ERJT08J682V at 6.8kΩ pulling to 3.3V, the idle current when the GPIO is driven low is approximately 0.49 mA, dissipating about 1.6 mW — far below the 0.33W rated power, making it very efficient for battery-powered IoT GPIO pull-up applications.

Can ERJT08J682V handle a 24V industrial supply in a pull-up configuration?

At 24V with 6.8kΩ, the ERJT08J682V dissipates approximately 84.7 mW, which is within its 0.33W (330 mW) rating. This leaves a comfortable margin for 24V industrial open-collector or open-drain pull-up circuits even at elevated ambient temperatures up to +70°C.

What is the resistance change of ERJT08J682V between -40°C and +85°C?

The ERJT08J682V has a TCR of ±200 ppm/°C. Across a 125°C range from -40°C to +85°C, the nominal 6.8kΩ resistance can shift by up to ±2.5%, or approximately ±170Ω, which is acceptable for pull-up, voltage divider, and timing circuits with ±5% initial tolerance.

Is the ERJT08J682V suitable for use in RC input protection circuits before ADC pins?

Yes, the ERJT08J682V is well suited as a series input protection resistor before ADC pins when paired with an ESD diode. At 6.8kΩ and 0.33W, it limits fault currents and forms RC filters with small capacitors to attenuate high-frequency noise above approximately 23 kHz with a 1 nF capacitor.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Panasonic

Panasonic is a leading electronic component manufacturer. FindMyChip sources Panasonic ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.0270
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
50+$0.0300$1.50
1000+$0.0270$27.00
pcs
Unit price: $0.0300 · Total: $1.50

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK